Refrigerator Dispenser Parts

The Dispenser Cover Overlay is an OEM part for Frigidaire refrigerators. This part fits over the front of the dispenser, providing a protective and decorative cover for the control panel and dispenser mechanisms.  

Causes of a bad dispenser cover overlay can include physical damage from impacts, wear and tear from frequent use, or fading and discoloration from prolonged exposure to sunlight and cleaning chemicals.  

Symptoms of a bad dispenser cover overlay include:

• Cracks or breaks in the cover
• Discoloration or fading of the overlay
• Difficulty using the dispenser controls
• The overlay peeling or coming loose from the dispenser

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Refrigerator Water Dispenser Cover Assembly is designed to protect and enhance the water dispenser area of your Samsung refrigerator. This genuine OEM part ensures a precise fit and seamless integration with your appliance, maintaining the original look and functionality. Crafted from durable materials, the cover assembly helps prevent spills, dust, and debris from affecting your water dispenser, keeping it clean and operational. Installation is straightforward, allowing you to quickly replace a cracked, missing, or damaged cover without the need for professional assistance. Compatible with a wide range of Samsung refrigerator models, this Water Dispenser Cover Assembly restores the appearance and performance of your fridge's water dispensing system. By choosing this genuine OEM part, you can trust in the quality and reliability that Samsung is known for, ensuring your refrigerator continues to provide fresh, filtered water efficiently. Improve your kitchen's functionality and maintain your appliance's value with this essential replacement part.

The Icemaker Fill Cup is an OEM replacement part for GE refrigerators. This component is specifically designed to channel water from the fill tube into the ice mold.

Symptoms of a bad Icemaker Fill Cup include:

• Water leakage inside the freezer, leading to ice accumulation
• Inadequate or irregular ice production
• The presence of unusual sounds during the ice-making process

Causes for a malfunctioning Icemaker Fill Cup can range from physical damage, such as cracks or warping due to temperature fluctuations, to blockages that impede the flow of water into the ice mold.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.

The Dispenser Pad is an OEM part for Whirlpool refrigerators. It is the user interface component that allows you to control and operate the water and ice dispensers.

Causes of a bad part can include physical impact or mishandling, exposure to moisture or liquid spills, or general wear and tear over time, leading to deterioration of the pad's internal electronics or surface.

Symptoms of a bad Dispenser Pad include:

• Unresponsive or non-functional dispensers
• Difficulty in selecting water or ice options
• Visible cracks, damage, or wear on the pad surface

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Pad is an OEM part for Whirlpool refrigerators. This part activates the dispensing mechanism for water and ice when pressed. 

Causes of a bad pad can include repeated use leading to wear and tear, accumulation of dirt or debris, or damage from accidental impacts. 

Symptoms of a pad include:

• No water or ice dispensing when the actuator is pressed
• The actuator feeling loose or unresponsive
• Intermittent or inconsistent dispensing
• Strange noises during activation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dispenser Lever is an OEM replacement part for Frigidaire refrigerators. This lever is a critical component of the refrigerator's water and ice dispenser system, located on the unit's exterior. It is designed to engage the dispenser when pressed, allowing for the seamless release of ice or water. 

Causes of a malfunctioning Dispenser Lever can include physical damage from impact, normal wear, and tear from repeated use, or a failure in the spring mechanism that could prevent it from returning to its off position. Maintaining this part in good working order is essential for its convenience.

Symptoms of a bad Dispenser Lever include:

• The dispenser fails to activate when the lever is pressed.
• The lever sticks in the pressed position or doesn't spring back.
• Difficulty in pressing the lever or it feels loose.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Dispenser Lever Assembly is an essential component for maintaining the functionality of your Samsung refrigerator's dispenser system. This genuine OEM part ensures a perfect fit and seamless operation, allowing you to easily access chilled water, ice, and other beverages. Crafted with durability in mind, the dispenser lever assembly is designed to withstand daily use, providing reliable performance over time. Installing this assembly is straightforward, making it an ideal choice for DIY repairs without the need for professional assistance. By replacing a faulty or worn-out dispenser lever with this high-quality genuine OEM part, you can restore the convenience and efficiency of your refrigerator's dispensing feature. Compatible with a wide range of Samsung refrigerator models, this dispenser lever assembly guarantees compatibility and ease of installation. Enhance your refrigerator's functionality and enjoy uninterrupted access to your favorite chilled items with the Refrigerator Dispenser Lever Assembly .

The Ice Door Fountain Kit is an OEM replacement part for Whirlpool refrigerators with built-in ice makers. It directs water to the ice molding trays and facilitates automated ice cube harvesting. Kit includes flapper, solenoid, strike arm, solenoid plunger, and instructions. Spring is not included. For the spring order 61004388.

Causes of a bad ice door fountain kit can include wear and tear over time, buildup of ice or debris obstructing the door mechanism, or damage to the components from frequent use.

Symptoms include:

• Incomplete ice cubes or low ice yield
• Drips or leaks in the ice maker area
• The ice drawer fails to eject cubes fully

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Ice Chute Door is an OEM replacement part for Whirlpool side-by-side refrigerators. It provides access to the dedicated ice and water storage and dispensing compartment located on the refrigerator door.  

Causes of a faulty chute door can include normal wear from frequent use. Internal temperature fluctuations may cause durability issues over several years.

Symptoms of problems include:

• Failure to fully close or form a tight seal  
• Difficulty dispensing ice or water due to door misalignment
• Premature cooling loss from unsealed opening
• Physical damage preventing proper closing

This OEM door is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators.

The Dispenser Module is an OEM part for Frigidaire refrigerators. This module controls the dispensing of ice and water from the refrigerator.  

Causes of a bad dispenser module can include electrical failures, worn-out components, or damage from regular use.  

Symptoms of a bad dispenser module include:

• The dispenser not responding to button presses
• No water or ice being dispensed
• Intermittent or inconsistent dispensing
• Display or control panel malfunctions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Dispenser Paddle is an OEM part for GE refrigerators. It is responsible for dispensing ice when you press your glass against the paddle in the dispenser area. This paddle activates the switch that releases ice from the ice maker to your cup or container.

Over time, the ice dispenser paddle can become worn out or damaged due to frequent use, impact, or accidental mishandling.

Symptoms of a bad ice dispenser paddle include:

• Difficulty or inability to dispense ice
• The paddle not returning to its original position
• Cracks or visible damage on the paddle
• The dispenser making unusual noises when activated

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grill Recess is an OEM replacement part for GE refrigerators. It is located in the dispenser area, acting as a catch tray to collect drips and spills from the water or ice dispenser. This component helps keep the dispenser area clean and prevents water from dripping onto the floor or refrigerator surfaces.

Over time, the grill recess can become cracked, discolored, or damaged due to regular use and exposure to moisture. Replacing it ensures a clean appearance and continued functionality of the dispenser area.

Symptoms of a bad grill recess include:

• Cracks or visible damage to the tray
• Difficulty fitting the grill securely in place
• Water pooling or dripping from the dispenser area
• Discoloration or wear from prolonged use

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Dispenser Paddle Assembly is an OEM part for GE refrigerators. It is a component located inside the ice chute that guides ice cubes from the freezer bin out through the dispenser and into a glass below. 

Symptoms of a bad paddle assembly include:

• Ice cubes remaining stuck in the chute and not dispensing
• Incomplete dispensing with ice falling back into the freezer  
• Blockages or backups occurring in the ice dispenser tube

Causes of a bad paddle assembly can include broken or cracked paddles, mineral buildup inhibiting proper movement, or damage over time like worn-out bearings. 

This part is also compatible with select Hotpoint, RCA, and Kenmore refrigerator models.

The Dispenser Module is an OEM part for Frigidaire refrigerators. It is a component located within the refrigerator door that is responsible for dispensing water and ice. The dispenser module houses the necessary valve assemblies, sensors, actuators and tubing required to deliver chilled water and ice on demand when the dispenser lever is engaged. It is designed to seamlessly integrate within the refrigerator door panel for convenient access.

Causes of a bad dispenser module can include buildup of mineral deposits or contaminants within the internal components that disrupt water flow or sensor functions over time. Mechanical wear and tear of plastic or rubber seals and valves is also common.

Symptoms of a bad dispenser module include:

• Slow or intermittent water flow from the dispenser
• Ice cubes dispensed one at a time instead of in batches
• Water or ice dispensing that doesn't work at all
• Leaks or water droplets below the dispenser area
• Error codes related to the dispenser on the control board

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Dispenser Overflow Grille is an OEM part for Whirlpool refrigerators. This grille sits below the water and ice dispenser on the refrigerator door, catching any spills or overflow to keep the area clean and prevent water from dripping down the refrigerator. For Black order 2206670B, for Bisque order 2206670T

Causes of a bad dispenser overflow grille can include repeated exposure to water, impact damage, or general wear and tear.

Symptoms of a bad dispenser overflow grille include:

• Cracks or visible damage to the grille
• Water not being effectively caught, leading to drips and spills on the refrigerator door
• Discoloration or staining of the grille

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Water Dispenser Lever (White), is an OEM part for Whirlpool refrigerators. This lever activates the water dispensing mechanism, allowing users to easily dispense water from the refrigerator.

Causes of a bad water dispenser lever can include wear and tear from frequent use, accidental breakage, or mechanical issues within the dispensing system.  

Symptoms of a bad water dispenser lever include:

• The lever not engaging or dispensing water
• Difficulty in pressing the lever
• The lever feeling loose or broken
• Water not being dispensed when the lever is pressed

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.