Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Dryer Heating Element

Best Seller
Dryer Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: 279838

Restore full heat and end long dry cycles - install the Whirlpool OEM Dryer Heating Element.

Why this heating element?

  • Factory-spec 5400 W / 240 V heating element with nickel-chromium coil - built by Whirlpool to Whirlpool OEM standards.
  • Broad compatibility: fits Whirlpool, Kenmore 110-series, Roper, Estate, Amana, Maytag & more 27-inch dryers.
  • Built to last: high-temp terminals & mica insulation resist fatigue and hotspots.

Fixes these common dryer problems

Problem How the element solves it
No heat / cold drum Replaces burned-out coil to restore heating circuit
Takes forever to dry Full wattage brings drum back to target temperature
Stops mid-cycle Prevents over-cycling caused by faulty element
Burning smell New coil eliminates hot-spot arcing & insulation burn


DIY install — about 20 minutes

  1. Unplug dryer and remove back panel to access heater housing.
  2. Disconnect wires; remove housing screws and slide assembly out.
  3. Swap old element for new, re-use hi-limit thermostat if still good.
  4. Re-assemble, run test cycle - enjoy fast, even drying.

This part fixes the following symptoms
  • No heat or not enough heat
  • Doesn't shut off
  • Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You My 22 year old dryer just stopped getting hot   Michael M. • Brunswick , GA • November 04, 2015

After 22 years my Kenmore (Whirlpool) dryer stopped getting hot. So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat. Here is a rundown of what I did and how long it took: • Taking the back off and vacuum <1 minute • Finding the components (from the... Read more

More
$53.95
Compare At:
$64.74
You Save:
$10.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387747

The Dryer Heating Element is an OEM replacement part for Whirlpool dryers. It is responsible for generating the heat necessary for the drying process, ensuring clothes and fabrics are thoroughly dried.

Symptoms of a bad dryer heating element include:

  • Clothes coming out damp or taking excessive time to dry
  • No heat or insufficient heat produced during the drying cycle  
  • Visible signs of damage or burnout on the heating element itself
  • Unusual burning smells emanating from the dryer

Causes of a faulty heating element can include normal wear over time, electrical issues, or physical damage from impact or overloading.  

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • Too hot
See more...
Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryer   Bobbie M. • King George , VA • October 06, 2017

I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer. Started by ordering a thermal fuse because it was... Read more

More
$55.95
Compare At:
$86.67
You Save:
$30.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8544771

The Dryer Heating Element is an OEM part for Whirlpool electric dryers. This element provides critical heat to properly dry wet laundry loads. Consistent warmth throughout cycles is key to leaving clothes completely dry. This 5400-watt, 240-volt heating element heats the air circulating around the drum.

Causes of a bad heating element can include failure due to extended usage cycles over time, or mineral buildup inhibiting heat transfer. 

Symptoms of a faulty element include:

  • Inability to reach or maintain desired drying temperature
  • Wet or damp clothes after full cycles   
  • Potential safety issues if element overheats
  • Dryer not working or requiring excess cycles to dry

This OEM Whirlpool replacement element is also compatible with Kenmore, Maytag, Amana and Whirlpool brands.

Do-It-Yourself Stories from Customers like You No heat   Dan R. • Woodruff , SC • November 30, 2018

First ran the built-in diagnostic tests. Got error code indicating that the inlet thermistor was open. Removed lower access panel and did continuity checks on the inlet thermistor, thermal cutoff and heating element. Even doing these checks is very difficult on this model due to the location of these parts and the limited access through the so-called access panel. But was able to get an open reading on the heating element, so I knew that at least that part was faulty. Could not get a reliable... Read more

More
$91.33
Compare At:
$108.68
You Save:
$17.35

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heating Element Assembly
Genuine Samsung part
By: Samsung
Part Number: DC97-14486A

The Dryer Heating Element Assembly is essential for ensuring your Samsung dryer heats effectively and dries your clothes efficiently. This high-quality assembly replaces faulty or damaged heating elements, restoring optimal performance to your appliance. Crafted as a genuine OEM part, it guarantees compatibility with a wide range of Samsung dryer models, ensuring a precise fit and reliable operation. Installation is straightforward, allowing you to quickly get your dryer back to working condition without hassle. By choosing this Dryer Heating Element Assembly, you benefit from consistent drying results, energy efficiency, and the longevity of your dryer. If your dryer is experiencing insufficient heat or failing to dry clothes properly, this genuine OEM part is the ideal solution to enhance your dryerGÇÖs functionality and extend its lifespan.

This part fixes the following symptoms
  • Too hot
  • Takes too long to dry
  • Doesn't shut off
  • tripping breaker
See more...
Do-It-Yourself Stories from Customers like You Samsung dryer not producing any heat   Maria D. • Niceville , FL • November 12, 2019

This has been posted on my Facebook (but can't tag AppliancePartsPros) titled "As My Husband Slept!" =( Each dash represents a caption in each post. - Nice try taking a few days off! Your vacation days, or hours, are numbered ?? - Step 1: Removed 2 screws from the back. So far so good! - (after removing the top of the dryer) Wow! I'm so proud of myself ????? - (after the front panel was removed) Step 2: Remove the front panel as instructed by the guy on the video ?? ... I think I'm going to be... Read more

More
$233.66
Compare At:
$280.39
You Save:
$46.73

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heating Element Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 131553900

The Heating Element Assembly is an OEM replacement part for Frigidaire dryers that is responsible for generating the heat necessary for drying clothes. This assembly converts electrical energy into heat and creates the warm air that circulates within the drum to dry clothes efficiently.

Symptoms of a bad Dryer Heating Element Assembly include:
Clothes remain damp after a full drying cycle.
The dryer takes longer than usual to dry clothes.
No heat is produced, resulting in cold air circulating within the drum.

Causes of failure can include overuse, a surge in electrical power, or lint buildup causing overheating and damage to the components.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Includes rear housing with the element and insulators already attached. For the element only order 5300622034. For the insulators order 131472100.

This part fixes the following symptoms
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Constant beeping no heat   Amy N. • Pike Road , AL • March 27, 2018

My 12 year old Frigidaire stack on top dryer had been beeping distress messages in some unintelligible code for about a year when it completely stopped producing heat. It also had a long standing issue with delicate fabrics and thin straps or drawstrings getting caught in the drum. After using this site to troubleshoot and viewing the useful how-to videos, I ordered and replaced the heating element, thermal limiter, and felt seals. Based on others' stories, I decided to also replace the rear... Read more

More
$117.95
Compare At:
$140.36
You Save:
$22.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heater Element
Genuine Frigidaire part
By: Frigidaire
Part Number: 134792700

The Dryer Heater Element is an OEM replacement part for Frigidaire dryers. It is a crucial component responsible for generating heat within the dryer drum, enabling the drying process to occur efficiently and effectively.

Symptoms of a bad dryer heater element include:

  • Extended drying times or failure to fully dry clothes
  • No heat or insufficient heat production during the drying cycle
  • Burning odors or visible signs of overheating

Causes of a dryer heater element failure can include general wear and tear over time, electrical issues, or damage from lint buildup or other obstructions preventing proper airflow.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You E64 error   Jay M. • Covington , LA • June 12, 2014

I just googled the error code saw how to do the repair and bought the part. It all went much smoother than I thought. Would do again Read more

More
$97.72
Compare At:
$153.21
You Save:
$55.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4391960

The Dryer Heating Element is an OEM part for Whirlpool dryers. This component is responsible for generating the heat needed to dry clothes efficiently. Situated in the rear or bottom of the dryer, the heating element heats the air before it enters the dryer drum, providing the warmth necessary for drying garments.

Common causes include overheating due to restricted airflow from a clogged vent, a break in the heating coil from wear and tear, or electrical issues such as short circuits. It's crucial to maintain proper dryer venting to prevent overheating and to ensure the longevity of the heating element.

Symptoms of a bad Dryer Heating Element include:

  • Clothes taking longer than usual to dry
  • Dryer not heating up at all
  • Increased energy bills due to the dryer running longer
  • A noticeable difference in drying efficiency

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

No longer includes terminals and adapter leads. You can purchase the wire separate, part number 279457. Another common Whirlpool dryer element is 279838. Use our model number search to be sure you're getting the correct element for your dryer.

This part fixes the following symptoms
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Old Whirlpool dryer model LE8650XWW0 would not heat purchase in 1993.   Byron V. • Huntsville , AL • December 08, 2017

Since the dryer was 24 years old I opted to replace all the possible problem components, instead of just the bad one. The parts aren't that expensive and do to their age I figured it was worth it to avoid having to go back into the dryer in a few months. The repair was surprisingly easy and went pretty much as the video instruction AppliancePartPros provided with one exception. Because, my model was much older than that used in the video, I had a more difficult time replacing the Heating... Read more

More
$31.95
Compare At:
$49.85
You Save:
$17.90

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Heater Assembly
Genuine Lg part
By: Lg
Part Number: 5301EL1001H

The Heater Assembly is an OEM replacement part for LG dryers. It is a critical component responsible for generating the heat necessary for drying clothes efficiently and effectively.

Symptoms of a bad heater assembly:

  • Dryer not producing enough heat or failing to dry clothes completely
  • Excessive drying times or inconsistent drying performance
  • Visible damage or breaks in the heating element coil
  • Burning odors or smoke emanating from the dryer during operation

Causes of a bad dryer heater assembly can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.

This OEM LG part is also compatible with Sears/Kenmore dryer models.

Do-It-Yourself Stories from Customers like You Dryer taking 2 3 drying cycles to dry my clothes   William L. • Collierville , TN • February 03, 2015

After reading several stories online about what to replace to fix the issue with my dryer not completely drying my clothes I decided to purchase a heating assembly, a sensor and a thermistor. I am not sure which one of these three pieces corrected the issue, but my dryer is back to drying my clothes as it should. The Youtube video's are priceless in helping to find and replace the parts. Read more

More
$217.63
Compare At:
$258.98
You Save:
$41.35

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heater Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 131475320

The Dryer Heater Assembly is an OEM part for Frigidaire dryers. It is responsible for generating the heat necessary to dry clothes during the drying cycle. This assembly includes a back plate, ceramic insulators, a 5/16 inch terminal heater element already attached, and a dryer safety thermostat.

Over time, the heater assembly can fail due to factors such as regular wear and tear, overheating, or electrical issues. A faulty heater assembly can result in the dryer not producing enough heat or not heating at all, significantly affecting the appliance's performance.

Symptoms of a bad dryer heater assembly include:

  • Dryer not heating or taking too long to dry clothes
  • Clothes coming out damp after a full drying cycle
  • The dryer shutting off prematurely or not reaching the desired temperature

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer would not turn on   Kathie R. • Burlington , WI • January 15, 2016

The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible. Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem. Next step was to... Read more

More
$78.95
Compare At:
$108.95
You Save:
$30.00

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Heating Element
Genuine Ge part
By: Ge
Part Number: WE11M10001

The Heating Element is an OEM replacement part for GE electric dryers. As the primary source of heat, it warm circulating air drying wet clothes efficiently.

Causes of failure may be surface fracturing and resistance loss due to deterioration over many heating cycles. Excessive mineral buildup may also hinder heat transfer capabilities.

Symptoms of a faulty element involve:

  • Very long or inefficient drying times
  • Unevenly dried clothes
  • No heat detected during drying cycles

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Mica style heating element.

Do-It-Yourself Stories from Customers like You No drying first run   Sherry F. • Auburn , MA • March 12, 2014

Ordered a new heating element. Read more

More
$143.95
Compare At:
$171.30
You Save:
$27.35

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY503978

The Heating Element is an OEM part for Whirlpool dryers. It generates the heat necessary to dry clothes by converting electrical energy into thermal energy, ensuring efficient and effective drying performance. This heater measures approximately 11.7 x 10.7 inches.

You should replace the heating element if it becomes faulty or damaged. Causes of a bad heating element can include prolonged usage, electrical issues, or physical damage due to overheating. Over time, the element can burn out or break, leading to insufficient heat production.

Symptoms of a bad heating element include:

  • The dryer not producing heat
  • Clothes taking longer than usual to dry
  • The dryer not reaching the desired temperature
  • Unusual noises or a burning smell during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer was running but not heating   Chris B. • Milton , FL • March 20, 2016

The heating element had a break in the heater coils, so I replaced it with a new one from Appliance Parts Pros. I also replaced the thermal fusible link and thermostat switch because they were so cheap it just made sense to go ahead and do it while I was in there. I also cleaned every nook & cranny in the dryer, then cleaned out the vent piping- which was about 100% clogged. The video's of how to tear down a dryer were indispensable to this repair - along with APP's always having the right... Read more

More
$53.27
Compare At:
$62.86
You Save:
$9.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Heating Element & Housing Assembly
Genuine Ge part
By: Ge
Part Number: WE11X20397

The Heating Element & Housing Assembly is an OEM part for GE dryers. This assembly includes the heating element, which is responsible for generating the heat necessary to dry clothes, and its housing, which protects and supports the heating element.

Causes of a bad heating element and housing assembly can include overheating, electrical faults, or wear and tear over time. These issues can lead to inefficient drying or complete failure of the heating element.

Symptoms of a bad heating element and housing assembly include:

  • Clothes taking longer to dry than usual
  • No heat being produced during the drying cycle
  • The dryer shutting off unexpectedly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Needed a new heater element   Charles D. • Overland Park , KS • September 26, 2015

Found a video on UTube on how to dissamble the dryer. It was striaght forward and helpful. In the process I found an unusal amount of lint in the pipe from the dryer to the vent pipe to the outside It was nearly blocked about 10" up the pipe.. Read more

More
$144.95
Compare At:
$173.94
You Save:
$28.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Heater Kit
Genuine Speedqueen part
By: Speedqueen
Part Number: 964P3

The Heater Kit is an OEM replacement part for Speed Queen dryers. This kit includes the heating element, which generates the heat necessary to dry clothes during the drying cycle. Rated at 5350 watts and compatible with 240-volt systems, it ensures efficient heating for optimal drying performance.

Causes of a bad Heater Kit can include normal wear over time, damage due to power surges or electrical issues, or overheating caused by restricted airflow. Accumulated lint or obstructions in the venting system can also contribute to heater failure.

Symptoms of a bad Heater Kit include:

  • Dryer not producing any heat
  • Clothes taking significantly longer to dry
  • Burning smell during operation
  • Visible damage to the heating element or wiring

This OEM Speed Queen part is also compatible with Alliance laundry equipment.

Do-It-Yourself Stories from Customers like You Speed queen dryer stopped heating   Darin D. • Odessa , WA • August 30, 2025

Very simple repair. Dryer is back in business. Heating coils broke and this is an OEM part from appliance parts pros. Spent more time vacuuming out of need the dryer than actually removing and installing the new heating element Read more

More
$241.43
Compare At:
$287.30
You Save:
$45.87

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Duct Heater Assembly
Genuine Samsung part
By: Samsung
Part Number: DC93-00154A

The Dryer Duct Heater Assembly ensures your dryer operates efficiently by maintaining optimal heating performance. This genuine OEM part is designed to deliver consistent temperatures, enhancing the drying process and reducing energy consumption. By replacing a worn or malfunctioning duct heater with this assembly, you can restore your dryer's reliability and extend its lifespan. The Dryer Duct Heater Assembly is compatible with a variety of Samsung dryer models, guaranteeing a secure fit and straightforward installation. Its durable construction provides long-lasting performance, minimizing the risk of overheating and improving overall safety. Choosing this genuine OEM part means you receive high-quality components that match the original specifications of your appliance. Enjoy a smoother, more effective drying experience with the Dryer Duct Heater Assembly, ensuring your clothes are dried thoroughly and efficiently every time.

This part fixes the following symptoms
  • Too hot
See more...
Do-It-Yourself Stories from Customers like You Heat went out on our samsung dryer dang bad timing   Kelly P. • Denver , CO • August 24, 2015

We watched the Video from Appliance Parts Pros of how to repair our dryer and literally had it fixed in about the same amount of time as it took to watch the video. Taking the dryer apart is typically what would scare one away from a self repair...but it was explained in detail and actually was super easy to fix. What a wonderful company!! Self fixed and saved us from having to wait for a repair man and we didn't have any repair bill....except for the part...but even that was at a very... Read more

More
$231.95
Compare At:
$273.70
You Save:
$41.75

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Heater
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304535760

The Heater is an OEM replacement part for Frigidaire dryers. It is responsible for generating the heat necessary to dry clothes efficiently during the drying cycle. The heater works in conjunction with the dryer’s thermostat and other components to maintain the appropriate temperature for optimal performance.

Over time, the dryer heater can fail due to wear and tear, electrical issues, or overheating caused by restricted airflow or clogged lint filters. A malfunctioning heater will prevent the dryer from achieving the temperatures needed for effective drying.

Symptoms of a bad dryer heater include:

  • Clothes remaining damp or wet after a full drying cycle
  • The dryer not producing any heat during operation
  • Unusual smells, such as burning or overheating odors
  • Error codes indicating heating issues

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer would not heat   Geroy M. • Portsmouth , VA • February 09, 2019

After following troubleshooting steps on the website verified the heating element assembly needed replacing. Since I had to breakdown the entire unit to get to it took the time to clean lint, dust and other buildup from inside and replaced other fuses also. Ordered and replaced the heating element assembly, control thermistor, thermostat, and inlet thermal fuse. Very easy repair following the provided videos on the site. Read more

More
$75.62
Compare At:
$89.99
You Save:
$14.37

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Heating Element Assembly
Genuine Ge part
By: Ge
Part Number: WE11M23

The Heating Element Assembly is an OEM part for GE dryers. It is responsible for generating the heat necessary to dry clothes during the drying cycle. This assembly includes the heating element itself, which heats up when electricity passes through it, and the housing that supports and protects the element.

You should replace this heating element assembly if it becomes faulty. Causes of a bad heating element assembly can include wear and tear over time, overheating due to blocked airflow, or damage from electrical issues.

Symptoms of a bad heating element assembly include:

  • Clothes not drying properly
  • No heat during the drying cycle
  • Longer drying times
  • The dryer not getting warm

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: For restring coil only use WE11X10007

This part fixes the following symptoms
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You The clothes dryer heater wasn't heating   Craig M. • Rockledge , FL • March 21, 2015

I replaced the heating element supplied by AppliancePartsPros.com. It took me longer than the estimated 30 minutes to an hour cited in the good instructional video. A few things took more time than I had expected: 1. Removing the top of the dryer unit resulted in my breaking off the three plastic tabs that is used to anchor the top to the structure below. In putting it back together, I didn't need those three tabs as the side plastic structure on each side will secure the top to the... Read more

More
$134.78
Compare At:
$168.68
You Save:
$33.90

IN STOCK
Ships Today Guaranteed
Add to Cart

Dryer heating element replacement parts are essential for keeping your dryer in top working condition. These components play a crucial role in generating the necessary heat to dry your clothes effectively. When the dryer heating element functions properly, your appliance can efficiently eliminate moisture from your laundry, making it a vital component of every dryer.

Dryer parts, including the heating element, are pivotal in maintaining the overall performance and functionality of the appliance. By ensuring you have a reliable heating element, you can be confident that your dryer will operate efficiently, reducing drying times and saving energy. Using OEM replacement parts for your dryer heating element ensures that they're specifically designed for your model, providing the best fit and compatibility. These elements often meet the highest quality standards, promising durability and long-lasting performance.

Having easy access to high-quality dryer heating element replacement parts means you can swiftly address any performance issues and keep your dryer running smoothly. By choosing the right parts, you're investing in the longevity and efficiency of your appliance, making sure it remains a dependable asset in your household.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store