Wall Oven Heating Element

One of the heating elements of the stove was burnt. After removal of two screws under the ceramic glass, I replaced the 2500 w heating element (8 inch size). Read more

Ordered replacement, took out old element and put in the new one. Very easy, and it works! Read more

Very simple to fix this problem and took only a few minutes. Appliance Parts Pros has the best delivery service. I ordered the part about 2pm and the part was delivered at 11am the next morning. I live in the Atlanta area so delivery is probably faster than other areas but they always ship the same day if the order is placed before 5pm. I have used App Parts Pros several times over the last 5 years and have always been very satisfied with the service and the parts. Read more

Looked at YouTube on how to replace burner. Marked wires on each fitting with different color marker and took Ipad photo of underside while my wife held range top up. We had shut off range double breaker in basement. I took part to a local appliance parts house nd they ordered prt which they did not have in stock. Estimate 3days. I called on 3rd day, back ordered, maybe ship,on the 7th day. Called 7th day, maybe two more weeks. Got online, on Fri. Afternoon, you had part, shipped it that... Read more

• Little to no heat when baking

I purchased a new element from Appliance Parts Pros online and received it a short time later. I was able to determine the correct size and element as a result of the picture and graph background. Very Helpful!!! The stove is over thirty years old and so it took some time for my friend to get the old screws out. Otherwise, installation was straightforward. Read more

• Little to no heat when baking

Order a replacement bake element for a 30 years old oven, watched the video on how to replace it, and took about 30 minutes to replace it. It was an easy task. Read more

It's one of the easiest jobs in the world. It take longer to unwrap the parts than to install them. Looks great...works great. Easy, Done. Read more

Easy. Pulled the two screws that hold the top in place. Then lift the top and slide it forward 4 inches. Reach in and disconnect the two wiring harnesses (Squeeze the sides to release). Lift the entire top off and place it upside down on the table. Remove the four screws that hold the metal panel to the top. Flip this panel upside down. From under the panel and release the three clips that hold the element in place. ***YOU NEED TO SAVE THESE CLIPS**** they do not come with the new... Read more

I ordered a replacement burner from AppliancePartsPros.com and replaced it using a u-tube video to find out how to do it. I took pictures of the wiring before I took it apart and then removed the burner element from the glass tom, but I left all the wires attached. I screwed the new element to the glass top and then one by one I unhooked each wire from the broken element and then hooked them each back onto the corresponding place on the new element. I used the digital pictures I took of the... Read more

Replaced bake element. Read more

Easy fix, took out the screws and disconnected the element. Make sure you unplug the oven!! replaced it with the new elements. oven is working good. Read more

First guess was the Bake Element, but I ran my hands around it and didn't feel any clue of a break/failure in the element. Further research indicated that the Hot Wire Relay is the next likely cause, that was really bad news because that part is unavailable anywhere. Swapped the H1 and H2 wires on the Hot Wire Relay, and found that Broil still worked, which indicated that the relay was good and the Bake Element was the likely cause. This was good news because that Hot Wire Relay is made... Read more

I broke two of the elements in my GE Profile cooktop because I failed miserably at removing the glass top. It pays to do your research, kiddies. All it takes is a Number 10 Torx bit to remove 12 screws holding the glass to the body of the appliance, and it lifts straight up. I was replacing the glass because it broke during my home's construction. Anyway, you need a 1/4" nut driver to remove the mounting tabs on the bottom of the old element and transfer them to the new one. The whole swap out... Read more

• Element will not heat

The burners and drip pans that I previously ordered fit this stove perfectly. It is so much better cooking on the cook stove with the burners laying properly. I'm very pleased. My only complaint is that I wish more parts were available for this old stove, I really love it! Read more