Need Help?
Call or text
Ice won't dispense or crush? The ice container assembly stores and dispenses ice. Includes auger and blades. Easy DIY repair—just slide in and go.
Replaced entire unit with part we ordered from you. Read more
Ice maker not producing ice or making grinding noises? This refrigerator ice maker assembly fixes failed ice production. Easy 10-15 minute DIY install.
Item delivered to my door in 1 1/2 days, priced $40 below other sites I had checked. Installed in 15 minutes. Just know that when installing an ice maker they don't start to make ice immediately. It can take several hours Read more
Missing or cracked ice bin? This ice bucket stores ice from your refrigerator's ice maker. Simple pull-out replacement installs in seconds.
Removed old seal and installed new seal. I laid down the new seal in the sun for about 20 minutes and it went in the grove extremely easy. Read more
The Ice Crusher Bucket is an OEM part for Whirlpool refrigerators. It serves as a container for holding and crushing ice from the icemaker. The bucket houses the crushing mechanism that breaks down ice cubes into smaller pieces, making it convenient fo
All the corners of the Ice Bucket were cracked and was causing the screw inside the bucket to jam. Read more
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Replaced icemaker and shutoff arm. Easy project. Read more
Ice bin overflowing or ice maker won't stop making ice? The shut off arm signals when to stop production. Simple install in under an hour.
Replaced it completely in less than an hour. Part was exact OEM replacement and worked perfectly. Read more
Ice dispenser not working or auger won't spin? This drive shaft transfers motor power to dispense ice. Easy DIY repair with 4 screws takes under an hour.
Replaced the ice dispenser motor( very easy only 4 screws and a power plug. I also replaced the auger drive shaft and rubber grommet Read more
Ice spilling in freezer from cracked bin? Replace your refrigerator ice container. DIY repair in 15 minutes—transfer auger with 6-8 screws. Simple fix.
Well, I took it out (it slides out) to get a good look at it,so i could ref pictures on your site..naturally I had serial/model of refrig,and thats mandatory to get the right part. It came in 2 days,,and being just the bucket, it took only a few minutes to transfer the auger assembly/cube/crusher.... into the new one, 6 screws total..Your site has excellent vids on DIY.......I HIGHLY reccomend. Whole process was'nt over 15 minutes, piece of cake....And NOW i can go back to my nightly 'scotch... Read more
Ice maker stopped working or leaking water into freezer? This complete ice maker assembly restores automatic ice production. Moderate DIY install.
Replaced entire ice maker. A couple of important points. (1) The ice maker module does not include all parts. The door flap for example is not included. So save all plastic parts from the old unit including screws. The biggest installation problem was the power cable. There was little room on the side of the ice maker for the cable and connectors to fit. Make sure the connector that mates with the refrigerator cable is seated onto the plastic housing and does not stick out or dangle out.... Read more
The Refrigerator Ice Maker Assembly is designed to restore the ice-making functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit and reliable performance, maintaining the quality you expect from your appliance. Crafted wi
I ordered a complete ice maker from appliance parts after watching a few YouTube videos I was sure that I could replace the icemaker. Upon the arrival of the icemaker I removed two screws slid the icemaker out disconnected the wiring harness and replace the icemaker in less than five minutes. I estimate I saved between 150 and $200 and service fees. Very Happy. Howard from Sparks, Nevada Read more
Ice maker leaking or shutoff arm broken? This fill cup and bearing assembly directs water into the mold and supports the arm. 15-minute DIY fix.
Watched online video and worked along - it was easy and quick - I was amazed! Read more
The Ice Stripper Kit is an OEM part for Whirlpool refrigerators. This kit helps in the efficient removal of ice from the ice maker, ensuring smooth and continuous ice production.
Common causes include wear and tear from regular use, buildup of
My fridge was too cold - everything was freezing solid, even in the produce bins. The air from the diffuser vent was constantly running. After unplugging the fridge and plugging it back in, the diagnostic code on the control panel indicated that the air diffuser was not working. I purchased a new air diffuser, watched the very helpful video that showed how to install it, and replaced the part in about 10 minutes. The next day, I can tell that everything in my fridge has finally begun to thaw... Read more
Ice dispenser not working or coupling spins freely? This motor coupling connects the dispenser motor to the auger. 10-minute fix with channel lock pliers.
I first thought it was the auger in the ice container so I changed it and it was not the problem. I then talked to ApplianceParts customer service that it might be the yoke on the motor that turned the auger or even the motor itself even though it worked. I ordered the parts, the yoke was supposed to be able to be changed by itself but mind would not come off the motor shaft so I had to cut it off just to remove it from the unit so I had to change the motor anyway because of this. So I advise... Read more
Ice won't switch between crushed and cubed? The dispenser solenoid controls the crusher mechanism. Most DIYers replace it in 25-30 minutes with basic tools.
Although the solenoid I purchased did not fix the problem, nor the "mother electronic board", or the motor, my experience with Appliance Parts Pros has been excellent. Extremely easy to look-up parts for my model refrigerator. Best part is their video instruction that gives you step-by-step hands-on how to remove and install. I would highly recommend these folks. If a lady such as myself can do repairs based on their instruction, anyone can. Thank you for providing such an informative... Read more
Ice maker not producing ice? This complete ice maker kit replaces failed units in 30-60 minutes. Includes all components to restore ice production.
Purchased the kit, followed instructions, within 30 minutes had the new ice maker installed. Works wonderfully. We were quoted over $350 to fix it from a repair agent, but it only cost $150 including shipping from you guys. Very happy. Read more
The Ice Maker is an OEM part for GE refrigerators. This component is responsible for producing ice cubes by filling the ice mold with water and freezing it until the ice is ready to be dispensed.
Causes of a bad ice maker can include wear and t
I broke the ice bucket when the problem first started as I kept trying to get the ice out of the dispenser. I replaced the Icemaker Asembly in less than 5 minutes, 1 screw and that was that. Everything works great and my dispenser is back in action. I did have a repair man come out to correctly diagnose the issue as the parts were expensive and I wanted to make sure it was not a leak somewhere, but indeed the mechanism. He charged me 40 to confirm the issue and I ordered the parts. Could... Read more