Need Help?
Call or text
Replacement water inlet hose for dishwashers. Connects water supply to the tub. Replace if cracked, leaking, or damaged by pests or wear.
Replaced hose Read more
Water supply tube that connects to the middle spray arm in your dishwasher. Replace if cracked, broken, or leaking to restore proper water flow to the arm.
I looked up what parts were missing called the manufacturer and they kind of blew me off, because I waited. So I ordered from Appliance Parts Pros. I had the parts within 3 days. The dishwasher works excellent and is brand new for a person who buys my home, Easy to order online came faster then they said and very reasonable priced. I have used them more than once in the past. Read more
Replacement drain hose kit for dishwashers. Flexible tubing routes wastewater from the wash chamber to the pump outlet. Replace if cracked or leaking.
Our GE was installed about 8 years ago and was AWESOME for much of its early life. However, progressively its cleaning ability diminished. By replacing all the spray arms (clogged with debris), filters, drain hose, and sump...this dishwasher cleans like it did when it was new! Cost was around $100 (also replaced a wheel and the silverware basket) and labor was relatively simple. And to think...my mother-in-law said, "Wouldn't it just be easier to buy a new one?!?". Read more
Replaces cracked, mineral-clogged, or punctured feed tube that routes water from lower manifold to upper spray arm. Includes rubber grommets and fittings.
I replaced the rear tube that feeds water to the top and middle spinners, and this appears to have fixed the problem. The middle spinner, which is attached to the bottom of the top rack, has a tube that connects to a hole in the middle of the rear tube.This hole has a rubber flap and I noticed that this flap was wide open. The tube under the tray has a straight edge protruding from it at the back. This edge pushes the flap open and I suspect that when the water is flowing, this edge rotates... Read more
Plastic adapter fitting that connects the water inlet valve to the supply hose in your dishwasher. Replace if cracked, stripped threads, or leaking.
Found the correct USA made OEM part from Appliance Pros, and installed it on my new Dishwasher. The use of this correctly manufactured Adapter prevented any damage to the threads of the dishwashers inlet solenoid valve which is made of a plastic material. If I had forced the after market adapter onto the solenoid valve instead of ordering the OEM adapter; it would have ruined the threads on the plastic solenoid valve resulting in the need to purchase a very expensive replacement valve. ... Read more
Flexible drain hose routes water from washer tub to household drainage. Replace if cracked, leaking, or deteriorated from age and flexing wear.
Replaced hose that came with the new washer with this longer one. Read more
Replaces a cracked, broken, or worn dishwasher water feed tube. Directs water from the pump to the upper spray arm for proper wash cycle distribution.
I got on appliance parts pros website, looked up my model number. Using their diagrams I found my part. Ordered it and replaced it, just like the new one. Read more
Plastic tube hanger that holds the upper dishrack in place inside your dishwasher tub. Replace if broken, cracked, or missing to restore proper rack support.
Found what I though was the 2 parts in the manual provided at purchase. With help from the agent at Appliance Pros. we confirm the correct parts. My experience with this vendor was excellent, agent was polite, patient and I received this part in a couple of days. Read more
Replaces cracked or brittle dishwasher hose connecting the sump to the water inlet valve. Includes 2 o-rings. Essential for preventing leaks during pump replacement or routine maintenance.
Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread. Six pointers. 1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is... Read more
Connects portable dishwasher hose to kitchen faucet. Replace if cracked, worn, or threads are stripped causing loose connection or leaks at sink.
SCREWED IT ONTO FAUCET Read more
This is a genuine replacement coupler for select dishwashers made by GE and Hotpoint. The dishwasher coupler is designed to connect the spray arm to the unit and provide the connection for the water supply. This durable plastic coupler is subject to high heat and repetitive motion and can break or wear down over time. This could result in dishes not be cleaned properly. The unit may also be leaking or failing to drain. In the event that this happens, a replacement will be needed. This OEM coupler is manufactured to exact standards. It is sold as an individual unit and does not include any additional accessories or hardware. The spray arm will need to be accessed in order to complete this repair, which requires a nut driver and flathead screwdriver. Be sure to wear gloves and unplug the unit before performing any repairs. Remove the spray arm and the filter in order to access the coupler. Remove the old part and replace the new one, then replace the filter and spray arm and test the unit for leaks.
Replaced sump and related pieces. Also replaced door baffles that were getting bad. The hardest part of job was removing the dishwasher from the its spot in cabinets. The info on site made replacing parts easy. Read more
Drain hose outlet connects your dishwasher to the drainage system. Replace if cracked, leaking, or worn to prevent water damage under your unit.
I replaced the water level sensor on the side of the dishwasher. Had to completely take out dishwasher and set on its side. Removed three hose clamps and three electrical disconnects. I have hard water and it looked like the float inside of the sensor wasn't moving properly. Read more
Replaces cracked, kinked, or chewed drain hose that carries wastewater from your dishwasher to household plumbing. Essential for proper drainage function.
I replaced the pump drain assembly. The flapper valve was included in the assembly, so I did not need to order that. On previous repairs, the old drain hose was tricky to reinstall, so I replaced it and the hose clamp.The silverware basket had holes in the bottom and required replacement. I had some broken tine clips. Read more
Fill and drain hose assembly for portable dishwashers. Connects unit to sink faucet. Replace if coupler leaks, hose cracks, or connections loosen.
We replaced the whole unit. Read more
Hose, with o - ring, shu (uc/12 & above)
This Sump to Float Hose is an OEM part for Bosch Dishwashers. It functions to carry water from the dishwasher sump to the float assembly. Continuous water flow and exposure to detergents can lead to wear or damage over time.
What Causes a Bad Sump to Float Hose: Exposure to chemicals and hot water, along with wear from water flow, can cause the hose to degrade or develop cracks.
Symptoms of a Bad Sump to Float Hose:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Channels wastewater from your dishwasher to the household drain. Replace if brittle, cracked, clogged, or leaking to restore proper drainage.