Drip Pan

Fits GE and HotPoint ranges where a ceramic terminal block is used (loop type plug-in surface elements). Color: chrome. It measures about 8 inches in diameter at its widest point at the top. Matching 8 inch drip bowl: WB31X5011. Surface elements: 6 inch WB30X218, 8 inch WB30X219. Element terminal block: WB17X5051.

Fits GE and HotPoint ranges where a ceramic terminal block is used (loop type plug-in surface elements). Color: chrome. It measures about 10 inches in diameter at its widest point at the top. Matching 6 inch drip bowl: WB31X5010. Surface elements: 6 inch WB30X218, 8 inch WB30X219. Element terminal block: WB17X5051.

The defrost drain pan collects water that melts off the evaporator during automatic defrost and holds it near the warm compressor so it can evaporate. Replacing a damaged pan helps prevent leaks, puddles, and odors around the base of the refrigerator.

• Collects defrost water routed from the evaporator drain
• Positions water in warm airflow near the compressor for evaporation
• Replace if the pan is cracked, warped, missing, or leaking
• Symptoms can include water on the floor, moisture under the unit, or musty odors

• Unplug the refrigerator; wear cut-resistant gloves
• Pull the unit forward and remove the lower rear access panel to reach the pan near the compressor
• Lift out the old pan; transfer any reusable clips/brackets; seat the new pan under the drain tube and ensure it's level and clear of moving parts
• Reinstall the panel, restore power, and check for proper drainage and evaporation

By Tappan/Frigidaire. One drip pan per package. Round and has three openings. Fits some Tappan, Frigidaire, Amana, Caloric, Modern Maid, GE, and HotPoint models. Color: chrome. Measures about 8 inches in diameter. Matching grate: 316055800.

This drip tray in a Midnight finish sits at the dispenser area to catch minor drips and splashes, helping keep your door clean and dry. It also refreshes appearance if the original tray is cracked, stained, or missing.

• Collects drips under the dispenser to help prevent water from running down the door or onto the floor
• Provides a stable landing for cups and glasses during dispensing
• Restores a clean look if the old tray is worn or discolored
• Typical symptoms: puddling at the dispenser, mineral buildup, or a loose/warped tray

• Pull the old tray straight out; some models require lifting the front edge first
• Clean the recess thoroughly before installing the new tray
• Align tabs and press evenly until fully seated—do not force
• Avoid activating the dispenser during installation; wipe with mild soap and water only

This 8-inch surface burner drip pan sits beneath a plug-in coil element to catch spills and crumbs and support the element. Replacing a stained or warped pan helps keep the cooktop cleaner and ensures the burner sits level.

• Collects drips and debris under the 8-inch coil element
• Supports the element so it seats properly and sits level
• Refreshes the cooktop's appearance by replacing stained or rusted pans
• Common symptoms: burner wobbles, pan is warped/corroded, persistent baked-on residue

• Disconnect power and allow the cooktop to cool completely.
• Unplug the coil element from the receptacle and set it aside.
• Lift out the old pan; align the new pan with the opening and any locator tabs, then seat it flat.
• Reinstall the element, fully inserting the terminals and ensuring it rests correctly in the pan.

This dispenser drip tray sits in the door recess to catch drips and splashes during dispensing, helping keep the front of your refrigerator clean and reducing moisture that can run down the door onto surfaces below. What it does:

• Collects water droplets and minor spills in the dispenser area
• Helps reduce stains, residue, and corrosion around the dispenser opening
• Restores proper fit and appearance when the original tray is cracked, warped, or missing
• Common symptoms: water pooling in/under the dispenser, loose or ill-fitting tray, visible cracks or leaks

• 1 drip tray

• Unplug the refrigerator and shut off the water supply before servicing
• Lift out the old tray from the dispenser recess; clean and dry the area
• Align and press the new tray fully into place so it sits flat and secure
• Wipe away any remaining moisture before restoring power and water

This is a medium burner bowl, also sometimes known as a drip pan, and it is made for ranges, stoves, and cooktops. This is a genuine replacement part made by General Electric. The burner bowl is situated underneath the heating element and is able to catch any food or debris that falls when cooking. The bowl or drop pan is there to catch any and all waste so that the user may easily clean up after the heat is turned off and the appliance is cooled down.A new medium burner bowl might be needed if the current one is damaged in any way including being broken or bent so that is it not fully secure under the burner. This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with ranges, stoves, or cooktops made by General Electric.

Color: Chrome. It measures about 7-1/2 inches wide by 4 inches deep. For Black, order WR17X12324.

Refresh your cooktop with this white burner drip bowl. It sits beneath a surface coil element to catch spills and splatters, reflect heat toward cookware, and help the element seat correctly for consistent performance and easier cleanup.

• Supports and centers the surface coil element
• Collects drips to protect the cooktop surface
• Reflects heat to aid efficient burner performance
• Restores appearance when the original bowl is stained, rusted, or warped

• Disconnect power to the range before servicing.
• Pull the surface coil straight out of the receptacle to remove it.
• Lift out the old bowl; align the locator notch on the new bowl and seat it flat.
• Reinsert the element fully and verify proper operation before restoring power.

Color: Almond. This kit includes ( 2 ) 6 inch pans and ( 2 ) 8 inch pans

This 6-inch drip pan sits beneath a plug-in coil surface element to catch spills and reflect heat. Replacing a stained or warped pan refreshes the cooktop and helps the element seat properly. What it does:

• Installs under a 6-inch plug-in coil element to collect drips and boil-overs
• Reflects heat back to cookware for consistent heating
• Supports and aligns the element so it sits level in the cooktop
• Common signs to replace: heavy discoloration, rust, pitting, warping, or a burner that won't sit level

• 1 6-inch drip pan

• Disconnect power at the breaker and let all surface elements cool completely
• Lift the coil element straight out of its receptacle; remove the old pan
• Align the indexing notch and seat the new pan; firmly reinstall the element
• Verify the element is fully engaged and level before restoring power

By Jenn Air/Maytag. 8 inch adapter ring. Fits some Jenn Air models. For the 6 inch order WPY707454.

Evaporator drip pan that collects defrost water and directs it to the drain, helping prevent leaks and puddles under the appliance. Restores proper drainage for reliable operation. What it does:

• Catches and channels defrost/condensate water away from the evaporator to prevent leaks beneath the unit.
• Helps stop water pooling or dripping from the bottom of the appliance.
• Reduces the risk of moisture-related odors or mildew by keeping drainage contained.
• Works with the refrigerator's drain system to promote normal defrost water flow.

• Disconnect power to the appliance before beginning any service.
• Access may require removing the toe grille or pulling the appliance out; follow the OEM service instructions for your model.
• Inspect and clear the drain tube and drain outlet while replacing the pan to ensure proper flow.
• Handle the pan carefully during installation and ensure it is seated so water flows into the drain as intended.

This replacement drain tray sits beneath the refrigerator's ice/water dispenser to catch drips and splashes, helping keep the door area clean and dry. It restores a neat, finished look when the original tray is cracked, stained, or missing. What it does:

• Collects drips and minor spills from the dispenser to reduce mess on the door and floor
• Helps prevent water streaks and mineral-stain buildup around the dispenser recess
• Restores a secure, flush fit when the original tray is warped, loose, or broken
• Common signs: standing water in the recess, leaks running down the door, visible cracks, tray won't stay seated

• 1 dispenser drain tray

• Lock dispenser controls or power off the refrigerator to avoid accidental dispensing
• Pull the old tray straight out; clean any residue in the dispenser recess
• Align and press the new tray in until fully seated and flush
• If your model uses a separate top grate, transfer and reinstall it on the new tray

By Jenn Air/Maytag. 6 inch adapter ring. Fits some Jenn Air models. For the 8 inch order WPY707453.