Need Help?
Call
Ice bin overflowing or ice maker won't stop making ice? The shut off arm signals when to stop production. Simple install in under an hour.
Replaced it completely in less than an hour. Part was exact OEM replacement and worked perfectly. Read more
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Replaced icemaker and shutoff arm. Easy project. Read more
Ice maker not producing ice or won't dispense cubes? This complete ice maker assembly replaces failed units. DIY-friendly install in under 10 minutes.
I found that the Ice Maker in my GE side by side made ice but would not kick out the ice when it had formed, the heating element or the switch that controls it didn't work. I ordered a new ice maker switched it out took less than 3 minutes. The cord was very stiff and just long enough but I got it to connect and in 35-40 minutes I had fresh ICE!! Read more
Fix ice maker not making ice, leaking water, or freezing to walls. Complete assembly replacement restores ice production. Moderate DIY repair.
Take off freezer door and tried to take off top shelf. Never got shelf off. Made it more difficult but got it replaced. Read more
Missing or cracked ice bin? This ice bucket stores ice from your refrigerator's ice maker. Simple pull-out replacement installs in seconds.
Removed old seal and installed new seal. I laid down the new seal in the sun for about 20 minutes and it went in the grove extremely easy. Read more
The Ice Cube Tray is an OEM part for LG refrigerators. It is located in the freezer section of the refrigerator and provides a designated space for freezing water into ice cubes. It is designed with individual compartments to form ice cubes in a specific shape and size.
Causes of a faulty ice cube tray can include regular wear and tear, physical damage, or improper handling. These factors can result in issues such as the tray cracking or breaking, difficulty in removing ice cubes, or improper freezing of the cubes.
Symptoms of a bad ice cube tray may include:
This OEM LG part can also be used on Kenmore/Sears appliances.
It was a snap. All I had to do was unsnap one end of where the ice tray attached to the ice maker and fit the tray into the two sides and then resnap the end back onto the icemaker. Very easy. Read more
This complete ice maker assembly automatically produces and stores ice cubes in your refrigerator's freezer section. It includes all internal components for filling, freezing, and ejecting ice into the storage bin. If your refrigerator has stopped making ice, produces misshapen cubes, or the ice maker is making unusual noises, this white assembly will restore reliable ice production.
Purchased a new replacement ice maker and plugged it in - worked beautifully. The best part is I ordered it Monday afternoon and received it early Tuesday. Very pleased. Read more
Ice spilling in freezer from cracked bin? Replace your refrigerator ice container. DIY repair in 15 minutes—transfer auger with 6-8 screws. Simple fix.
Well, I took it out (it slides out) to get a good look at it,so i could ref pictures on your site..naturally I had serial/model of refrig,and thats mandatory to get the right part. It came in 2 days,,and being just the bucket, it took only a few minutes to transfer the auger assembly/cube/crusher.... into the new one, 6 screws total..Your site has excellent vids on DIY.......I HIGHLY reccomend. Whole process was'nt over 15 minutes, piece of cake....And NOW i can go back to my nightly 'scotch... Read more
Ice maker stopped working or leaking water into freezer? This complete ice maker assembly restores automatic ice production. Moderate DIY install.
Replaced entire ice maker. A couple of important points. (1) The ice maker module does not include all parts. The door flap for example is not included. So save all plastic parts from the old unit including screws. The biggest installation problem was the power cable. There was little room on the side of the ice maker for the cable and connectors to fit. Make sure the connector that mates with the refrigerator cable is seated onto the plastic housing and does not stick out or dangle out.... Read more
Ice dispenser not working or coupling spins freely? This motor coupling connects the dispenser motor to the auger. 10-minute fix with channel lock pliers.
I first thought it was the auger in the ice container so I changed it and it was not the problem. I then talked to ApplianceParts customer service that it might be the yoke on the motor that turned the auger or even the motor itself even though it worked. I ordered the parts, the yoke was supposed to be able to be changed by itself but mind would not come off the motor shaft so I had to cut it off just to remove it from the unit so I had to change the motor anyway because of this. So I advise... Read more
Ice won't switch between crushed and cubed? The dispenser solenoid controls the crusher mechanism. Most DIYers replace it in 25-30 minutes with basic tools.
Although the solenoid I purchased did not fix the problem, nor the "mother electronic board", or the motor, my experience with Appliance Parts Pros has been excellent. Extremely easy to look-up parts for my model refrigerator. Best part is their video instruction that gives you step-by-step hands-on how to remove and install. I would highly recommend these folks. If a lady such as myself can do repairs based on their instruction, anyone can. Thank you for providing such an informative... Read more
Ice maker not producing ice? This complete ice maker kit replaces failed units in 30-60 minutes. Includes all components to restore ice production.
Purchased the kit, followed instructions, within 30 minutes had the new ice maker installed. Works wonderfully. We were quoted over $350 to fix it from a repair agent, but it only cost $150 including shipping from you guys. Very happy. Read more
Ice maker leaking or shutoff arm broken? This fill cup and bearing assembly directs water into the mold and supports the arm. 15-minute DIY fix.
Watched online video and worked along - it was easy and quick - I was amazed! Read more
This ice maker automatically produces ice cubes by filling a mold with water, freezing it, and harvesting the cubes into a storage bin. It connects to your refrigerator's water supply and electrical system to operate continuously. Replace this part when ice production stops completely, cubes are malformed, or the unit leaks water into the freezer.
The complete ice-making unit typically located in the freezer compartment that produces, harvests, and dispenses ice cubes. Replace when ice production stops entirely, produces malformed ice, makes unusual noises, or leaks water.
I broke the ice bucket when the problem first started as I kept trying to get the ice out of the dispenser. I replaced the Icemaker Asembly in less than 5 minutes, 1 screw and that was that. Everything works great and my dispenser is back in action. I did have a repair man come out to correctly diagnose the issue as the parts were expensive and I wanted to make sure it was not a leak somewhere, but indeed the mechanism. He charged me 40 to confirm the issue and I ordered the parts. Could... Read more
Ice dispenser not working or making grinding noises? A worn auger drive bar often causes dispensing failures. Moderate DIY fix with video guidance.
I replaced the 2 metal parts that were rusted out. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.