Kitchenaid Valve

Replaced inlet valve. Read more

• Not dispensing water

Kenmore model 106.74252402 fridge with icemaker. Believe it or not, this was fixed with only a 1/4" nutdriver. The parts fit exactly and took 10 minutes each to replace. The most surprising was the inlet valve. I didn't need to cut any tubing since the old valve had push-connectors like the replacement. It was identical. Simply pushed the fitting to remove old tubing and pushed into new part. Pull off plugs and push onto new part. 2 screws hold valve to fridge frame. Screw cardboard cover... Read more

Appliance Parts Pros Helped me diagnose the problem. Helped me find the part. The part arrived before the estimated arrival date. I followed the step by step directions and tips on there instruction video. 20 minutes later I have a working refrigerator. Thanks APP I won't hesitate to do this again! Read more

Replaced water inlet valve. Read more

Replaced both primary and secondary water valves to make sure I fixed the problem. Both valves have to open when you function the water dispenser and when the ice maker tray needs refilling. YouTube video was a great help and let me know that I had to lengthen one hose. The video showed me the exact parts I needed to lengthen the hose. YouTube video also let me know that I had needed to transfer the internal springs in the hoses when I cut the old connections off. Never would have known... Read more

• Ice maker not making ice
• Leaking

Order new valve Read more

• Will not drain

I checked the drain hose for blocking at the garbage disposal and then at the connection point to the dishwasher. The hose was clear and nothing was obviously obstructing where the drain hose connects to the dishwasher. At this point I Googled the model number with the term "will not drain" and immediately landed on the AppliancePartsPros.com website. At the Drain & Wash Impeller Kit page amazingly had a video showing the technician replacing the impeller on a dishwasher essentially the same as... Read more

The parts were easy to order, arrived quickly, and were good quality. I am very satisfied with my purchase and the service of the appliance parts pros! Read more

Replaced the valve. Read more

Replaced the water inlet valve. Read more

Replaced both primary and secondary water valves to make sure I fixed the problem. Both valves have to open when you function the water dispenser and when the ice maker tray needs refilling. YouTube video was a great help and let me know that I had to lengthen one hose. The video showed me the exact parts I needed to lengthen the hose. YouTube video also let me know that I had needed to transfer the internal springs in the hoses when I cut the old connections off. Never would have known... Read more

• Ice maker won't dispense ice
• Ice maker not making ice
• Leaking

After some research on the internet,I found out that the most likely cause was a failed water inlet valve. The refrigerator is quite old so I wasn't going to spend an arm and leg on it to fix it. I was pleasantly surprised to find the part, at a reasonable price, that I needed on this website with a helpful how-to video to boot. The part I needed wasn't in stock. I was followed up with an e-mail stating an estimated time when the part would be released. A week or so later I received the... Read more

Removed cover from Whirlpool washer (~20 years old) and found water to be leaking from hose connection at Break Vac. Obviously the hose had to be replaced but the Break Vac looked corroded and partially plugged, too, possibly inhibiting water flow. While the cabinet was off I noticed the Suspension Spring was rusted off so I ordered 1 of those, too. Total of all parts was under $45 so looks like we won't be getting a newer, more efficient washer anytime soon. Everything arrived in 3 days and... Read more

Ordered new circuit board and water pump. Hired a professional to install them Read more

We have a built-in KitchenAid KSSC42QKS02. Unlike the other Kitchenaid or Whirlpool refrigerators, our valve is located at the bottom and towards the front of the refrigerator. I actually preferred it to be located at the back like the others. It would've been easier to get to. We had to lower the fridge turning the screws(front of the lower panel), so it would sit on the rollers. Then we just simply roll the fridge out, turn off the supply valve, and install the newly bought valve inlet. It... Read more