Washer Dryer Combo Control Board

This replacement dryer timer advances the cycle sequence and lets the dryer move through timed and automatic settings so clothes dry on the selected cycle. Restores selector/timer control when the original timer fails. What it does:

• Controls cycle advancement so the dryer progresses through timed and automatic cycles
• Enables selection of timed and automatic dry settings via the control knob
• Common symptom: dryer won't advance through cycles or stays stuck on a setting
• Needed if the timer knob doesn't respond, the timer won't turn, or cycles do not complete

• Always disconnect power to the dryer before starting any repair
• Access usually requires removing the control panel or console—handle trim and fasteners carefully
• Note wire locations or take a photo before disconnecting harnesses to ensure correct reassembly

This is a Frigidaire washer/dryer combo timer. The washer or dryer timer controls all the timed functions of the appliances, including the cycles and draining. Without a working timer, there is no way for the machine to judge when to start certain parts of the cycle, when to drain water, start rinsing, switch from hot to normal air, and many other tasks. When a timer goes out on these machines, a replacement needs to be ordered immediately. To replace this part, first unplug the appliance from the main power source. This timer is a genuine OEM replacement part sourced directly from Frigidaire. This part is only available individually and is not included with other parts or the main appliance. This product is compatible with Frigidaire appliances.

Made to be used on washing machines, this part is a timer. This component controls the electrical parts and the duration of time of the washing machine's cycles. It controls the operation of the washing machine, including each of the cycles.When the timer will not advance, the washing machine could become stuck in a cycle and run constantly without stopping. The washing machine may not advance through the particular cycle like the washing, rinsing, or spinning and could get stuck on one of the cycles. It's important to unplug the washing machine from the electrical outlet before attempting to repair or replace any parts. The replacement process is fairly easy and takes about 15 minutes to complete.This timer is compatible with washing machines that are manufactured by the Frigidaire, Gibson, Kenmore, and White-Westinghouse brands. This part is sold individually and is sourced straight from the manufacturer itself.

This mechanical cycle timer controls the sequence and duration of wash, rinse and spin functions in compatible top-load washing machines, restoring proper cycle advancement and timing. What it does:

• Advances the washer through timed cycles so selected wash, rinse and spin functions run in the correct order.
• Routes power to the washer's motor and valves at the right points in the cycle.
• Commonly replaces timers that cause machines to get stuck on one cycle, fail to advance, or not complete a cycle.
• Works with the machine's existing control knobs and wiring harness to restore automatic cycle sequencing.

• Disconnect power to the washer before beginning any service to avoid electrical shock.
• Service typically requires access behind the console or control panel; remove panels carefully and keep fasteners organized.
• Note and photograph wiring connections before removal; reconnect wires to the same terminals.

This replacement part is a timer manufactured by Frigidaire and intended to replace a faulty or broken timer in various models of washing machines. The timer controls the duration of the washing machine cycles via the electrical components of the appliance. If the user is struggling to control the washing machine cycle lengths, then this part may need to be replaced. The washing machine should be entirely disconnected from the power and water sources before any repair attempts are made. It's recommended that work gloves are worn to ensure the hands are protected. This is a genuine OEM part and has been sourced directly from the manufacturer. As an authentic replacement part, this timer is suitable for use with various models of washing machines that have been manufactured by Frigidaire, Electrolux, Gibson, and various other brands. This part is sold individually.

This electromechanical timer controls the sequencing and duration of appliance cycles, restoring timed operation for wash/dry/cook functions depending on application. Replaces a worn or non-advancing timer to help return your appliance to normal use. What it does:

• Rotates through cycle positions to start and stop functions at set intervals
• Sends power to motors, heaters, or pumps according to the selected cycle
• Common symptom: appliance fails to advance through cycles or stops mid-cycle
• Common symptom: timer knob feels loose, won't click, or won't engage selected settings

• Disconnect power before servicing to avoid shock hazard
• Follow your model-specific service manual for disassembly and timer alignment
• Verify terminal connections and wiring harness fit before applying power

This ATC temperature control board regulates the refrigerator's temperature and ensures consistent cooling cycles by directing fans, compressors, and defrost operations. Replaces a failed control board to restore normal temperature control and cycle timing. What it does:

• Controls thermostat signals to the compressor and evaporator fan for stable internal temperatures
• Manages defrost cycles and related heater operation if applicable to the model
• Helps stop erratic cooling, excessive frost buildup, or continuous running when the board fails
• Works as the electronic decision hub when mechanical thermostats are replaced by board-driven control systems

• One ATC temperature control board (WH12X10386)

• Disconnect power and unplug the appliance before starting any repair
• Handle the board by its edges and avoid touching circuitry to prevent ESD damage
• Verify harness connector orientation and secure all plug connections; do not force connectors