Washer Spring Parts

This idler spring maintains proper tension on the dryer drum belt by keeping the idler pulley engaged. Replacing a weak or broken spring restores consistent drum rotation and helps prevent belt slippage and squealing during operation.

• Maintains belt tension by pulling the idler arm/pulley against the drum belt
• Helps the motor start and keep the drum turning smoothly
• Reduces belt slippage that can cause squealing or chirping
• Common symptoms of a failed spring: drum won't turn or turns intermittently; belt comes off or feels loose; loud squeal from idler area

• Disconnect power; for gas dryers, shut off the gas supply
• Access the idler assembly; relieve belt tension and note belt/spring routing before removal
• Attach the new spring to the same holes/orientation on the idler arm and base; verify belt path
• Rotate the drum by hand to confirm alignment and tension before reassembly

This is a suspension spring for select washers. It supports and stabilizes the wash tub during spin and agitation to reduce vibration and noise, helping the machine run smoothly.

• Supports the tub within the cabinet to control movement
• Helps reduce excessive vibration, banging, or walking during spin
• Addresses symptoms like out-of-balance loads, noise, or shaking
• Loss of tension, stretching, or breakage can require replacement

• Unplug the washer and shut off water supply before repair
• Access typically requires removing the top or front panel; support the tub to relieve spring tension
• Wear gloves and eye protection; springs are under tension
• Replace any damaged or missing suspension components in pairs or as required.

This spring sleeve is a small replacement part that supports and guides a spring assembly, restoring proper spring alignment and tension so the appliance operates quietly and reliably. It's a simple, low-cost wear item. What it does

• Guides and protects the spring to prevent binding or wear.
• Maintains correct spring alignment and tension for consistent operation.
• Can help reduce noise, rattling, or uneven movement when worn or damaged.
• Used where a spring needs a durable sleeve or spacer to run smoothly.

• Disconnect power and water before beginning any repair.
• Inspect adjacent components (spring, clips, mounts) and replace any damaged parts.
• Use basic hand tools; avoid forcing parts to prevent breakage.
• Test the appliance through a short cycle after reassembly to confirm correct function.

This suspension assembly stabilizes and supports the washer tub, absorbing movement during wash and spin. Replacing a worn suspension can reduce vibration and banging, helping restore smooth, balanced operation and quieter performance. What it does:

• Supports and centers the wash tub within the cabinet
• Dampens vibration, sway, and rocking during spin
• Helps prevent thumping, "walking," and off-balance interruptions
• Common symptoms of failure include excessive shaking, banging noises, frequent off-balance stops, or a tub that leans/sits low

• 1 suspension assembly

• Disconnect power and turn off water supply before servicing
• Wear gloves; components may be under spring tension—support the tub when removing the old assembly
• Access location varies by model; follow your model's service/diagram guidance
• After installation, level the washer and run a test spin to verify balance

This suspension stabilizes the washer tub to reduce excessive movement and vibration during spin cycles, helping the washer run quieter and more smoothly. What it does

• Supports and centers the washer tub to prevent excessive rocking during operation
• Dampens vibration and reduces noise caused by an imbalanced load
• Helps maintain proper drum alignment for reliable spinning and draining
• Worn or damaged suspension can cause loud noise, heavy vibration, or excessive movement

• One suspension (single tub support) as shown

• Disconnect power and water supply before beginning any repair
• Support the tub/drum before removing the old suspension to prevent sudden movement
• Inspect other suspension components and mounting hardware; replace any worn parts for balanced performance

This spring assembly restores proper tension to the mechanism it attaches to, helping the component open, close, or return smoothly and reliably. It replaces a worn or broken spring to eliminate binding, sagging, or uneven movement. What it does:

• Provides restoring tension for the linked mechanism so moving parts return to the correct position
• Replaces broken, stretched, or corroded springs that cause sagging, sticking, or uneven operation
• Helps restore smooth opening, closing, or return action and reduces noise from loose components
• Prevents further wear on connected parts by keeping the mechanism correctly tensioned

• Disconnect power (or unplug appliance) before starting any repair to avoid shock or injury
• Springs are under tension; use appropriate tools and caution to avoid slipping or sudden release
• Follow OEM instructions or service manual for proper routing and secure attachment points

This genuine OEM spring provides the tension needed for the appliance door to open and close smoothly and stay properly seated. It restores reliable door operation and reduces sagging or unlatched door issues. What it does:

• Applies tension to the door hinge/assembly so the door stays closed and aligns properly.
• Helps the door open and close smoothly without slamming or dragging.
• Reduces wandering, sagging, or a door that won't latch securely.
• Can eliminate popping or squeaking noises tied to a worn or stretched spring.

• One replacement door-tension spring.

• Disconnect power (and water if applicable) before starting any repair.
• Springs are under tension — use caution and appropriate tools/gloves to avoid injury.
• Inspect hinge/retainer hardware and replace any damaged clips or anchors during installation.

This tension spring provides the restoring force needed for smooth operation of the appliance mechanism. It replaces a worn or broken spring to restore proper movement and reduce rattling or sagging parts. What it does

• Supplies tension to return or hold moving components in place.
• Helps stabilize doors, levers, or internal linkages so they operate smoothly.
• Restores correct alignment and reliable motion when installed correctly.

• One tension spring (single piece as shown)

• Disconnect power and, if applicable, gas supply before beginning any repair.
• Use appropriate hand tools and wear eye protection; springs can release suddenly.
• Verify correct orientation and attachment points against the appliance service manual or parts diagram.