Auger, Helix, Crusher

This is the small extension that attaches to the ice maker's shut-off arm. It lengthens the arm so the ice bin can reliably raise/lower the arm to stop ice production when full and resume when space is available.

• Extends the ice maker's shut-off/bail arm for proper bin detection
• Helps prevent ice maker overfilling when the bin is full
• Can resolve issues like continuous ice production, overfilling, or ice not stopping
• Restores original fit and function on compatible ice maker assemblies

• Disconnect power and shut off water supply before servicing
• Access the ice maker, then slide/clip the extension onto the shut-off arm as directed by your model's service info
• Ensure the arm moves freely and properly actuates the ice maker switch
• Restore power and verify the arm stops ice production when raised

Replace a cracked or worn bin to help restore dependable dispensing. This ice container assembly holds ice from the icemaker and, when you press the dispenser, moves it toward the chute for cube or crushed ice. What it does:

• Stores and contains ice in the freezer until dispensing
• Interfaces with the auger drive to feed ice toward the dispenser chute
• Works with the crusher/cube selection mechanism (model dependent)
• Common symptoms include no or slow dispensing, cracked/leaking bin, or ice jams/clumping

• 1 ice container assembly

• Disconnect power to the refrigerator before servicing
• Empty the old bin and pull it straight out of the freezer compartment
• Transfer any reusable parts from the old assembly
• Align the drive coupling and slide the new container fully into place; restore power and test dispensing

The Refrigerator Ice Maker Assembly is designed to restore the ice-making functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit and seamless integration with your appliance, maintaining the reliability you expect from your fridge. Crafted with high-quality materials, the Ice Maker Assembly delivers consistent ice production, keeping your beverages cool and refreshments ready whenever you need them. Installing this Ice Maker Assembly is straightforward, allowing you to quickly replace a faulty or damaged component without the need for professional assistance. Its durable construction helps prevent leaks and mechanical issues, ensuring long-lasting performance. By choosing this genuine OEM part, you guarantee compatibility with a wide range of Samsung refrigerator models, enhancing the overall efficiency of your appliance. Upgrading to the Refrigerator Ice Maker Assembly not only restores functionality but also improves the convenience of your kitchen routine. Enjoy the peace of mind that comes with using a trusted, manufacturer-approved part designed specifically for your refrigerator. Whether you're repairing an existing ice maker or replacing a worn-out unit, this assembly provides a reliable solution to keep your Samsung refrigerator performing at its best.

This ice container assembly stores ice in the freezer and feeds it to the dispenser. Replacing a cracked or stripped bin helps restore smooth, reliable dispensing of cubed or crushed ice from your refrigerator.

• Holds finished ice beneath the icemaker and connects to the auger drive to move ice to the door chute
• Internal mechanism advances ice and enables crushed-ice operation when selected
• Helps resolve no or intermittent ice dispensing, auger slippage, or inconsistent cubed/crushed output
• Direct replacement for damaged or cracked ice buckets

• Disconnect power and turn off the icemaker; wear cut-resistant gloves
• Lift out the old bin; discard clumped ice and clear any jams in the chute
• Align the auger drive coupling and slide the new assembly fully into place
• Restore power and test both cubed and crushed dispense modes

This AC motor powers the appliance's fan or blower to move air through the system. Replacing a worn motor restores proper airflow to support cooling/ventilation and protect internal components from overheating. What it does:

• Rotates the fan/blower to circulate air through the appliance
• Helps maintain proper temperatures and component cooling
• Common failure signs: fan won't start, starts then stalls, weak airflow, loud humming/grinding, overheating or safety shutoffs
• Often required when motor bearings seize or windings fail

• 1 AC motor

• Disconnect power and allow hot components to cool before servicing
• Note wire positions; transfer any brackets, grommets, or the fan blade from the original motor if reused
• Clear debris and restore power and verify smooth, quiet airflow

This baffle sits in the ice bin and supports the auger so ice feeds smoothly to the dispenser. Replace a cracked or worn baffle to restore reliable dispensing and reduce jams or grinding from the ice bucket.

• Supports and aligns the ice auger inside the bin
• Guides cubes/crushed ice toward the crusher/dispenser
• Helps prevent auger wobble, binding, or excessive noise
• Failure can show as weak/no ice dispensing or intermittent jams

• Disconnect power; remove the ice bin from the freezer/door
• Empty the bin and remove any screws/clips securing the baffle
• Transfer any reusable hardware; orient the baffle correctly around the auger
• Tighten fasteners without overtightening; reinstall bin and test dispense

This is an ice maker assembly that is made to be installed on refrigerator and freezer units. This part includes both the ice maker and the housing. The purpose of this part is to make ice that can then be dispensed. In the event that the ice maker is no longer making ice cubes, the ice maker assembly will need to be replaced. Over time, this component could become cracked or broken due to exposure to cold temperatures. Be sure to unplug the refrigerator from the power source before replacing this part. Store any food that could perish in a temperature safe location so that it doesn't go bad during the replacement process.The ice maker is sold individually and sourced straight from the manufacturer. This specific part is compatible with refrigerator and freezer units that are manufactured by the KitchenAid, Whirlpool, Kenmore, Kenmore Elite, Amana, Crosley, Maytag, and Inglis brands.

This refrigerator ice bucket stores ice made by the icemaker and positions it for dispensing. Replacing a cracked or warped bin restores smooth ice flow and helps prevent jams, spills, and mess inside the freezer.

• Holds and contains ice cubes in the freezer for easy access and dispensing
• Interfaces with the auger/crusher assembly in dispenser-equipped models
• Helps correct issues like ice jamming or inconsistent dispensing caused by a damaged bin
• Addresses visible damage such as cracks, chips, warping, or a bucket that won't seat properly
• Can reduce stray ice or moisture under/around the bin when the original is compromised

• Unplug the refrigerator and turn off the icemaker/water supply before starting
• Remove the old bin; transfer any auger/crusher components from the original if your model uses them
• Seat the new bucket fully so it latches/aligns correctly with the drive
• Restore power and verify proper dispensing operation

The Ice Bucket Coupler is an OEM part for Whirlpool refrigerators. It is a component that connects the auger motor to the ice bucket and facilitates proper ice delivery. The coupler works behind the scenes to allow a smooth transfer of ice from the bucket to the dispenser for convenient access.

Causes of a bad Ice Bucket Coupler can include wear and tear over time, fatigue from continuous use, or damage to the coupling mechanism.

Symptoms of a bad Ice Bucket Coupler include:

• Ice cubes accumulating near the icemaker and not filling the bucket
• Decreased ice production or an empty bucket despite the icemaker running
• Loose ice bucket connection or the bucket detaching from the refrigerator body

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This upper ice bin holds ice and engages the auger/crusher assembly for dispensing from the freezer. Replacing a cracked or worn bin restores smooth cubed or crushed ice delivery and reduces jams and spills. What it does:

• Holds and feeds ice to the auger/crusher for dispensing through the door
• Aligns and supports the auger drive and crusher components
• Helps maintain proper ice flow and dispensing performance
• Common symptoms: ice won't dispense or crush, bin won't seat/latch, visible cracks or broken tabs, unusual grinding from the bin area

• One upper ice bin

• Disconnect power before servicing; remove the ice bucket from the freezer
• Empty remaining ice and transfer any reusable internal components from the old bin to the new bin as required by your model
• Ensure the auger drive yoke engages and the bin seats fully before restoring power
• Handle carefully; overtightening fasteners can crack the new bin

This replacement ice bucket housing encloses and supports the freezer's ice storage bin at the dispenser. A damaged housing can cause bin wobble or misalignment—replacing it restores a secure fit, smoother dispensing, and helps reduce stray ice and frost.

• Holds and aligns the ice bin for proper engagement with the dispenser mechanism
• Guides ice toward the chute and helps contain cubes and shavings
• Helps limit warm-air leaks around the bin to reduce frost and clumping
• Typical symptoms: bin won't seat or is wobbly, poor or no ice dispensing, ice spilling inside freezer, visible cracks in the enclosure

• Unplug the refrigerator and shut off water before servicing
• Remove the ice bin; take out any screws or clips securing the housing
• Transfer any reusable brackets or screws from the old housing to the new one
• Reinstall the housing level and secure; seat the bin fully, restore power, and test dispensing

This ice maker shut-off arm is the wire lever that detects the ice bin level and stops production when raised. Replace a bent, broken, or missing arm to restore reliable on/off control of your icemaker.

• Monitors bin fullness; in the up position it opens the internal switch to pause ice making
• Lowers as ice is used so the icemaker can resume cycles
• Restores manual shutoff when you lift the arm

• Disconnect refrigerator power and turn off the water supply before servicing
• Remove the ice bin for access; open the icemaker front cover if your model has one
• Pull the old arm straight out of the pivot holes; align and fully seat the new arm so it moves freely
• Restore power and lower the arm to resume ice production; the arm raises and stops production when the bin is full

This ice dispenser auger drive mounts on the dispenser motor shaft and engages the ice bucket auger. Replacing a worn or stripped drive restores the connection so your refrigerator can move ice smoothly to the chute.

• Couples the dispenser motor to the ice-bin auger to rotate and move ice toward the chute
• On models with crushers, also drives the crushing mechanism
• Worn or rounded splines can cause little or no ice dispensing even though the motor runs
• May produce clicking/grinding noises from the door during dispense
• Visible cracking or play at the coupling indicates replacement is needed

• Unplug the refrigerator and shut off water before servicing
• Remove the ice bin to access the dispenser motor shaft in the freezer door
• Note the orientation; remove the old drive and seat the new drive fully on the shaft, transferring any original hardware if present
• Reinstall the ice bin, restore power, and test ice dispense

This right-hand bucket glide supports a refrigerator bin/drawer and forms the track it slides on. It restores smooth, level movement and proper alignment when the original glide is cracked, worn, or missing.

• Provides side support and a smooth sliding track for the bucket/drawer
• Helps keep the bin level and aligned so it opens and closes properly
• Replaces a cracked, warped, or broken right-hand glide
• Common symptoms: drawer sticks, binds, sags, or comes off its track

• Disconnect power and remove food from the affected drawer area
• Slide out the bucket and remove any shelf/frame as needed for access
• Remove mounting screws or tabs, note the glide's orientation, and transfer any hardware
• Position and secure the new right-hand glide; reinstall components and test drawer movement

This position-specific ice crusher blade (#1) fits inside the refrigerator's ice bucket assembly. It helps break up cubes into crushed ice; replacing a bent or worn blade restores consistent crushing and reduces jams or grinding noises during dispensing.

• Works with the auger and other numbered blades to crush ice when "Crush" is selected
• A bent, dull, or corroded blade can lead to no crushed ice, only cubes, slow dispensing, or scraping/grinding noises
• Restores even crushing and smoother auger rotation
• Position- and orientation-specific within the blade stack; match to your original

• Disconnect power and switch the ice maker OFF before servicing
• Remove and empty the ice bucket; allow any frost to thaw
• Disassemble the bucket front/auger and note the exact blade order and orientation—take photos for reference
• Wear cut-resistant gloves; reassemble blades, spacers, and washers exactly as removed and verify the auger turns freely before reinstalling

The Ice Maker is an OEM part for Frigidaire refrigerators. Located inside the freezer compartment, it produces batches of bullet-shaped ice to be accessed through the door dispenser. As the component tasked with creating on-demand ice, the ice maker plays an important role in offering refreshed beverages.

Causes of a bad ice maker include normal wear of internal parts like the water fill tube, freezer coil, or gear motor over extended use. Mineral sediment within hard water areas could also impact performance by restricting water flow or freezing mechanisms over time.

Symptoms of a faulty ice maker involve:

• Insufficient ice production
• Odd sized cubes
• Loud freezing noises
• Ice with inconsistent texture or cloudiness

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.