Need Help?
Call or text
Color: Black
Membrane switch keypad mounts behind the control panel. Replace if buttons are unresponsive, cracked, worn, or the overlay is peeling or damaged.
Literally took no more than 15 minutes. I unscrewed the back panel of the door, unplugged the old keypad and pealed off the old keypad. I used rubbing alcohol to thoroughly clean the surface where the new keypad would go. Then I slid the new keypad into place and plugged it in. Peal off the adhesive backing and stick the new keypad down, reattach the door panel and you are good to go. Read more
Usually ships within 4 - 14 days
Black support frame that holds the touch keypad and control interface on your range. Replace if cracked, warped, or damaged to restore secure mounting.
First took apart my range control panel to review the possible failed component based on the flashing error code I was receiving. Found some insects inside the panel. Cleaned out but this did not work..possible short. Checked online with your chat service and they confirmed the two possible parts I may need. I ordered and replaced the most likely one and that did the trick. Part is working great and it did not take more than an hour to install. Read more
Replaces cracked, worn, or unresponsive touchpad and control panel assembly on your range. Restores button function and display when keys stop working.
Replaced Control Panel on LG Oven. I would not recommend these LG Ovens. This is the THIRD control panel in 5 years. Read more
Adhesive graphic label for your range's electronic control panel. Replaces worn, faded, or unreadable button markings. Restores a clean console appearance.
I looked up the part numbers, ordered them from Appliance Parts Pro and they arrived the next day. Followed the video to replace the parts - it was super easy and now everything works great again! Saved lots of time and money. Read more
Replace your oven's touch pad control panel if buttons are unresponsive, cracked, or worn. Includes membrane switch for restoring keypad functionality.
Changed the control board and keypad. An used keypad that was installed worked for a few days but was damaged by the control board. I would always change both parts at the same time with new replacements just in case. Read more
Replace your dishwasher's front control keypad when buttons are worn, cracked, or the interface is damaged. Adhesive-backed assembly restores control panel.
Opened up door panel, unplugged ribbon cable from old keypad and plugged in new keypad without installing just to verify keypad was the problem. Start button on new keypad worked so I then removed old keypad which is basically just like peeling off a sticker. Next step was to remove leftover adhesive using solvent. This was most time consuming step of the repair. Once adhesive was removed I cleaned the mounting surface thoroughly to ensure new keypad would adhere. I then passed ribbon... Read more
Replaces the cracked, faded, or worn clock/timer overlay on your range control panel. Restores button markings and display labels for easy reading.
Repair was relatively easy. You'll need a 5/16 socket with a short extension and a phillips-head screwdriver. Probably also an old rag and a bucket of hot soapy water. I started by sliding the stove out from the wall. Unplug the stove as soon as possible. No sense messing with 240 volts AC. If you're like me, and you haven't cleaned back there in a while, here's where you'll need the soapy rag. Cleaning up the stove (and the wall, and floor) will help make the job less gross. Next I... Read more
Replace your oven's broken or cracked control panel assembly. This front-mounted touchpad panel controls temperature settings and functions.
It was easy, take out the front control panel and replace it. It got damage when I use the Clean Self option I will never use this option again. About the AppliancePartsPros.com service it was excellent!! Read more
Control panel touchpad for your dishwasher. Installs on the front panel. Replace if buttons are unresponsive, cracked, or worn from daily use.
My unit would sometimes start. Sometimes not. Reset and start are the same key and either it did nothing or it would drain or it would start. While the video did match my unit. It was close enough to help. I removed the front per the video and snapped in the new control strip. Fixed in less than 10 minutes with only a manual screwdriver. Read more
Fix cracked or fallen dispenser trim that prevents reliable operation. This collar kit restores alignment and appearance around your dispenser opening.
The housing shield had cracked, which caused the dispenser level from reliably pivoting and triggering the switch so replacing that caused the dispenser switch and hinge assembly to work reliably once again. Also, the ice-flapper would frequently stay open causing the ice shoot to frost up and get clogged, so replacing the ice dispenser solenoid fixed that problem as well. My cover collar had fallen several times and cracked and attempts to glue it did not work, so I ordered another one of... Read more