Burner & Related Parts

Ordered new/replacements, excellent chat on line, Quick turn around delivery. Thank you Will recommend to friends. Read more

I ordered your collection of burner caps, which the store I bought the stove from could not locate, and it fit perfectly. Read more

I bought new parts, but in black, so that any future staining over time would not be as noticeable. I was able to find everything I needed through AppliancePartsPros.com, and even though I only paid for economy delivery (3-6 working days), I was amazed that they turned up within 24 hours of my order being submitted! Replacing the parts was a 3 minute job, & my 14 year-old Kenmore cooker looks brand new. Read more

When I first looked at my dryer I thought it was my ignitor, on a closer look I found that about an inch of my burner assembly arm was laying in a corroded mess on the bottom pan of my dryer. I came online and found your website. After reviewing your parts I thought well I can probably get those local and with competive pricing. Wrong!! There are 3 appliance parts stores withing about 3 miles and I checked them all. Higher prices by 25-35% and longer wait times than your advertised... Read more

Found web site. Called the 800 number. Placed the order. 2 days later, they were at my door. Read more

I bought a new orifice and installed it. Read more

Replaced both the valve and igniter. Hope they last for more than 4 yrs! Read more

Found that the gas line did not have a dirt trap put in it. So I put one in. I think the regulator valve was not closing off. To be safe, I replaced the gas safety valve and regulator. Read more

Conversion kit said put propane orifice .109 in to correct the problem but I had to use the .102 orifice. Read more

Found the parts I needed ordered them from your site Received them and installed in a few minuets and was done Read more

Ordered replacements Read more

After turning off the gas and unplugging the electricity, I removed all the burners from the stove top using a 3/16" hex socket. Then used a 1/4" socket to removed two or three screws under each burner which hold the burner base to the bottom of the top panel. Then pulled all the knobs and removed the front panel which was held in by two Phillips screws accessible from underneath the panel. It helps to open the oven door to get at these screws. With the knob panel gone, I removed two screws... Read more