Capacitor

This high-voltage magnetron capacitor stores and delivers the pulse of energy the microwave magnetron needs to generate heat. Replacing a failed unit restores proper high-voltage function so the oven can heat reliably. What it does:

• Stores and releases high-voltage energy to the magnetron during cooking cycles.
• Works with the oven's diode and transformer to produce microwave energy.
• A failed capacitor can cause no heat, weak heating, or a blown fuse/circuit interruption.
• Designed for the microwave high-voltage assembly; handle as a high-voltage component.

• Disconnect power and unplug the appliance before service.
• Discharge the capacitor with an insulated tool before touching terminals.
• Verify this part number matches your appliance before ordering.

This is a capacitor intended for use with dryers. This part is used in tandem with the dryer's motor to start the appliance. The capacitor sends a jolt of electricity to the motor, which in turn activates the appliance. With use over time or because of damage caused otherwise, the dryer capacitor may malfunction. It can also fail entirely. When the dryer capacitor is no longer working efficiently, it has to be replaced.Malfunctioning dryer capacitors will emit a humming or buzzing sound instead of kicking the dryer into full operation mode. Replacing a dryer capacitor is simple. It is always necessary to unplug the appliance before starting the process of repairing the part. Wear gloves for protection. A multimeter can be used to test the old capacitor before removing the part. If it fails, replace it with a new part and reassemble the machine.This dryer capacitor is a genuine OEM replacement part. It is sold as an individual unit. It is made of durable, high-quality materials. The dryer capacitor is sourced from the manufacturer. The dryer capacitor can be used in several models of machines made by RCA, General Electric, and Hotpoint.

This capacitor helps the appliance's motor/compressor start and run smoothly by providing a short electrical boost at startup. Replacing a faulty capacitor restores reliable motor operation and can stop intermittent starting or unusual humming. What it does:

• Provides the temporary surge of electrical energy needed for motor/compressor startup
• Stabilizes motor operation to prevent slow starts, stalling, or continuous humming
• Helps maintain consistent motor speed during normal cycles
• Reduces stress on the motor's start circuit to avoid premature wear

• Disconnect power to the appliance before inspecting or replacing the capacitor
• Discharge the capacitor safely before handling (capacitors can hold charge after power is removed)
• Compare terminal type and mounting method to ensure correct fit before installation

The Capacitor is an OEM part for GE dryers. It is part of the dryer's motor system, providing an extra boost of power to start the motor and keep it running smoothly during operation.

A bad capacitor can lead to motor-related issues and dryer malfunctions. Causes of a bad capacitor can include electrical surges, overheating, or general wear and tear over time.

Symptoms of a bad capacitor include:

• Dryer not starting or having difficulty starting
• Motor running erratically or making unusual noises
• Dryer drum not spinning
• Dryer taking longer than usual to dry clothes

Replace your faulty or damaged Capacitor with this genuine OEM GE part to restore your dryer. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
 

The Capacitor High Voltage is an OEM part for GE microwaves. It stores and releases high voltage electrical energy to power the magnetron, which generates the microwaves for cooking.

Over time, capacitors can deteriorate due to prolonged exposure to high voltage, excessive heat, or electrical surges. A malfunctioning capacitor can lead to inefficient cooking or complete failure of the microwave.

Symptoms of a bad capacitor include:

• The microwave not heating food properly
• A loud humming or buzzing noise during operation
• The microwave shutting down unexpectedly
• Visible damage or leakage from the capacitor

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This high-voltage capacitor sits in the microwave's HV circuit, storing and releasing energy to power the magnetron. Replacing a weak or failed capacitor may restore heating performance and help reduce stress on other high-voltage components. What it does:

• Provides energy storage and filtering in the microwave's high-voltage circuit
• Works with the HV transformer and diode to supply power to the magnetron
• Common symptoms: runs but doesn't heat; loud hum/buzz during cook; blows the internal fuse or trips a breaker when cooking starts; visible bulging or leakage on the capacitor

• 1 high-voltage capacitor

• Unplug the microwave; for built-in/OTR units, switch off the circuit breaker as well
• The capacitor can retain a dangerous charge—use the proper discharge procedure
• Photograph wiring, transfer leads to the same terminals, and secure the capacitor in its bracket
• If no-heat persists, test the HV diode, transformer, and magnetron

This TH capacitor is an electrical control-circuit capacitor used on compatible Bosch appliances to help stabilize voltage and filter electrical noise for reliable control-board operation. Replacing a failed capacitor can address intermittent control issues. What it does

• Stabilizes control-board voltage and helps filter electrical noise that can cause erratic behavior.
• Supports reliable startup and operation of control circuits.
• Common symptom link: intermittent or unexplained control-board errors, erratic or non-responsive controls.
• Common symptom link: appliance displays control or error codes related to electronics or intermittently fails to start.

• Disconnect power to the appliance at the breaker before servicing to avoid shock.
• Discharge any capacitors and allow boards to sit before touching components; use appropriate ESD precautions.
• Only replace with the exact part number; confirm orientation and connector fit before reassembly.

This is a motor start/run capacitor that helps the appliance's motor start and run smoothly by supplying a brief boost of electrical energy. Replacing a failing capacitor restores reliable motor startup and operation. What it does:

• Provides the brief electrical surge needed to start and keep the motor running
• Commonly linked to motors that hum, fail to start, or run intermittently
• Helps prevent overheating from repeated start attempts when functioning properly
• Works with the appliance's start circuitry to ensure consistent performance

• Disconnect power to the appliance before accessing electrical components
• Discharge the capacitor and use insulated tools
• Observe polarity/terminal layout and secure connections to factory specifications
• Dispose of the old capacitor according to local electronic-waste regulations

This capacitor helps the refrigerator compressor start and run smoothly, restoring reliable motor operation and improving cooling performance when the original capacitor fails. It's a direct-replacement electrical component used on compatible Frigidaire appliances. What it does:

• Supplies the brief electrical boost the compressor motor needs to start
• Supports continuous motor operation to maintain consistent cooling
• Commonly linked to symptoms such as the compressor struggling to start, loud humming, or reduced cooling
• Helps prevent hard starts that can lead to overheating or repeated cycle failures

• One capacitor

• Disconnect power to the appliance before service to avoid electric shock
• Capacitors can hold a charge—discharge safely before touching terminals
• Verify terminal connections match the original and secure all wiring after replacement

The Capacitor is an OEM part for Whirlpool range hoods. This capacitor functions to optimize blower motor performance. It works in tandem with the motor to efficiently expel cooking vapors and gases from the kitchen.

Causes relate to standard wear over extended use of the vent hood. Electrical issues can cause premature capacitor failure.  

Symptoms of a bad capacitor include:

• Reduced air circulation and weaker ventilation
• Abnormal humming or grinding noises from the motor
• Failure of the blower to turn on as desired

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This motor run capacitor helps the appliance motor start and run more smoothly, restoring proper motor performance and reducing hum or startup problems. It's a direct-replacement electrical component used in compatible Whirlpool appliances. What it does:

• Provides the phase-shifted current the motor needs to start and maintain normal operation
• Helps reduce motor humming, slow starts, or intermittent motor stalls
• Restores proper motor torque and efficiency when the original capacitor has failed
• Works as the electrical timing/storing component for motor cycles

• One motor run capacitor

• Disconnect power to the appliance before attempting replacement to avoid electrical shock
• Discharge the capacitor before touching terminals; use insulated tools and follow safe procedures
• Match terminal configuration and mounting to the original part