Electrolux Control Board

This electronic control board regulates the appliance's functions and user interface so cycles and settings respond correctly. Replacing a faulty board restores reliable control and display operation when the original board has failed. What it does:

• Interprets user commands and sends signals to motors, valves, and other components
• Controls cycle timing, temperature, and other programmed functions
• Can cause loss of display, non-responsive buttons, or failure to start when defective
• May trigger erratic or unexpected operation if internal electronics fail

• One electronic control board as shown

• Disconnect power (unplug or switch off breaker) before beginning work
• Handle the board by its edges and avoid static discharge (use an anti-static wrist strap if available)
• Verify appliance model and part number match before installing

This main electronic control board manages a refrigerator's key functions, translating user commands and sensor signals into compressor, defrost and lighting operation for reliable daily performance. What it does:

• Receives inputs from the user interface and sensors, then controls compressor, fans and defrost cycles.
• Regulates cooling cycles to help maintain set temperatures.
• Powers and communicates with the display and status lights.
• Can cause symptoms such as a blank display, unresponsive controls, continuous run/overcooling, or intermittent cooling when failing.

• Disconnect power to the appliance before starting any repair to avoid shock or damage.
• Handle the board carefully and avoid electrostatic discharge; use proper grounding.
• Verify connectors and mounting location match your appliance before installation.

This electronic control board governs the refrigerator's functions and user interface, restoring reliable temperature control and cycle management when the original board fails. Replaces a faulty or unresponsive control module to return normal operation. What it does:

• Manages compressor, fans and defrost cycles by sending timed signals to key components
• Controls temperature setpoints and responds to user interface inputs
• Can cause unresponsive displays, incorrect temperatures, or failure to start if faulty
• Helps clear intermittent operation or erratic cycling linked to a bad control board

• One electronic control board (main)

• Disconnect power to the appliance before starting; verify power is off at the breaker
• Handle the board carefully; avoid static discharge and do not touch circuitry
• Note connector positions and mounting locations for correct reassembly

This inverter is the compressor control module that converts incoming power and regulates motor speed for variable-speed compressors, helping the fridge maintain consistent temperatures and energy-efficient cooling. What it does:

• Supplies and converts power to the compressor motor so the compressor runs at variable speeds
• Regulates compressor speed to maintain steady cooling and reduce temperature swings
• Can cause the compressor not to run or intermittent cooling when faulty
• Fault symptoms may include error codes, fridge not cooling, or unusual compressor behavior/noise

• One inverter (compressor control) module

• Disconnect power to the appliance before starting to avoid shock
• Handle the board carefully and avoid static discharge; use ESD protection if available
• Verify the replacement PN and wiring match the original before connecting

This electronic control board manages appliance functions and settings, restoring responsive control and reliable operation when the original board fails. It replaces a faulty or non-responsive main control to help the unit run correctly. What it does:

• Receives input from user controls and sensors and sends commands to motors, valves, and displays
• Replaces a board that causes unresponsive buttons, erratic cycles, or no power to controlled components
• Helps resolve issues like intermittent operation, incorrect cycle behavior, or loss of control functions
• Works as the main logic/control interface for appliance operation

• One control board only

• Disconnect power before accessing electrical components to avoid shock or damage
• Handle the board by edges; avoid touching circuitry or connector pins
• Verify connectors and harness orientation before reconnecting; secure mounting to prevent vibration damage

This electronic control board manages oven functions and display features so your range responds to temperature, timer and cooking commands. It replaces a failed console board to restore normal front-panel control and oven operation. What it does:

• Regulates oven functions including temperature input, bake/broil selection, timers and touchpad/display signals
• Processes user commands from the front console and sends signals to heating elements, relays or sensors
• Common symptom: unresponsive or erratic front-panel display, stuck or non-working controls
• Also used when oven settings won't change or timed cycles fail to start

• High-voltage component — disconnect power at the breaker before servicing
• Handle board by edges and avoid touching circuitry; ground yourself to prevent ESD damage
• Verify all wiring is reconnected to original terminals; secure mounting before restoring power

This electronic control board replaces the oven's primary control module to restore timing, display, and bake/broil cycle control. It fixes issues where the range won't start, displays errors, or has unresponsive touch controls. What it does:

• Manages oven temperature settings, timed bake cycles, and user interface commands
• Controls relays and sends signals to heating elements and sensors
• Helps stop incorrect displays, unresponsive buttons, or intermittent operation
• Works with safety interlocks and diagnostics to maintain normal oven functions

• One electronic control board as shown

• Disconnect power at the breaker before accessing the control panel to avoid shock
• Handle the board by edges and avoid touching components to prevent ESD damage
• Confirm connector locations match before installing; secure mounting screws and connectors

This switch control board replaces the oven/range user control module that routes user inputs and power to heating and accessory circuits, restoring normal control response and selector function. Ideal when buttons or settings fail to respond. What it does:

• Receives user inputs from the console and sends control signals to heating elements and components
• Routes power through selector switches to select temperature, mode, or burner settings
• Commonly used when controls are unresponsive, intermittent, or produce incorrect settings
• Helps stop erratic element behavior caused by a faulty switch/control board

• Disconnect power at the breaker or unplug the appliance before inspecting or replacing the board
• Handle the board by its edges and avoid static discharge; use anti-static precautions if available
• Verify correct replacement by matching part numbers and connector locations before installation

This electronic main control board manages a fridge's user inputs and core functions so the appliance responds correctly to commands and cycles. Replacing a faulty control board restores reliable control and display operation. What it does:

• Receives signals from the user interface and sends commands to compressors, fans and other subsystems
• Manages timing and basic operational logic for cooling and accessory functions
• Restores display and front-panel responsiveness when the board is the failure point
• Stops or prevents erratic or intermittent appliance behavior caused by a failed control module

• One control board

• Disconnect power to the appliance before beginning work
• Handle the board by the edges and avoid static discharge; use a grounding strap if available
• Document connector locations/arrow orientations before unplugging; reconnect all harnesses firmly

This main electronic control board manages the appliance's user interface and core functions, restoring responsive controls and proper operation when the original board fails. What it does:

• Receives and processes commands from the control panel so buttons and displays respond correctly
• Communicates with sensors and other modules to manage temperature, timing, and cycle functions
• Powers relays and outputs that control motors, heaters, valves, or compressors depending on appliance type
• Replaces a failed or intermittent board that causes error codes, an unresponsive display, or inconsistent operation

• Disconnect power to the appliance before starting work to avoid electric shock
• Handle the board carefully; avoid touching components and use anti-static precautions
• Verify the part number on the existing board and the appliance wiring harness match before installation

This mechanical dryer timer controls cycle sequencing and timing for compatible Frigidaire-style electric dryers, restoring proper cycle advancement and user-selected timing. Fits as a direct-replacement timing/control module. What it does:

• Advances the dryer through timed cycles and user-selected settings
• Routes power to components per cycle position
• Helps correct symptoms like cycles that won't advance, no change between settings, or a stuck timer knob
• Replaces a worn or non-rotating timer mechanism that prevents normal dryer operation

• Disconnect power at the breaker or unplug the dryer before service
• Handle the control and timer gently; avoid bending terminals or stressing wiring
• Verify knob alignment and cycle indexing during reassembly
• Refer to the dryer service manual or wiring diagram for exact hookup and safety procedures

This electronic control is the main user interface and timing brain for your oven or range, restoring reliable cycle selection and display functions so cooking settings respond correctly. What it does:

• Replaces a faulty control board that governs bake/ broil/clock and timer functions
• Restores button/keypad and digital display responsiveness when commands aren't registering
• Helps resolve intermittent operation, incorrect cycle starts, or unresponsive controls
• Works with existing wiring harness and sensors when those components are good

• One electronic control board

• Disconnect power to the appliance at the breaker before beginning any work
• Handle the board by its edges and avoid contact with circuit traces or components
• Verify other components (wiring harness, door switch, sensors) before replacing the control

This is the electronic control board that governs the appliance's main functions and user interface, replacing a failed board to restore normal control and cycle operation. It fits the OEM form and connects to factory wiring. What it does:

• Manages timed cycles, user inputs, and electronic commands for the appliance
• Controls display and indicator responses so settings register correctly
• Helps resolve symptoms like unresponsive controls, incorrect cycle behavior, or blank/error displays
• Interfaces with sensors and relays to coordinate heating, motor, and valve operation

• Disconnect power to the appliance before attempting service to avoid shock
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available

This electronic control is the main circuit board that manages oven functions, display and user inputs so your range responds correctly to temperature and bake/clean commands. Replaces a failed control to restore normal oven operation. What it does:

• Processes touchpad or selector inputs and runs oven cycles (bake, broil, timer, etc.)
• Drives the front display/clock so time and settings are visible
• Commands heating elements/relays to regulate oven temperature
• Can stop operation or show error codes when a fault is detected
• Prevents or corrects symptoms like unresponsive controls, blank or flashing display, and ovens that won't start

• One electronic control (main oven control board)

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board carefully to avoid static damage; avoid touching circuit traces
• Some installs require removing the console or back panel and transferring mounting hardware and connectors