Electrolux Control Board

Fix unresponsive controls, blank displays, or non-dispensing water and ice. This electronic control board manages cooling, defrost, and fan operations.

Fix unstable temperatures, constant running, or no cooling issues. This refrigerator control board regulates temperature settings and cooling cycles.

Fix E15 errors, runaway oven temperature, or unresponsive controls with this range control board. Manages cooking modes and temperature regulation.

This is a replacement dryer control board for an electric dryer. The dryer control board is the main electrical board that controls all the primary functions of a dryer. If the dryer has stopped working properly or is no longer turning or heating, this could mean that the dryer control board needs replaced. To replace the board, make sure the dryer is turned off and removed from power. The dryer control board will be located either on the back of the dryer or behind the user interface. Accessing it will require a screwdriver.This authentic OEM replacement part can be used in many models including the Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse and others.

If your range displays E15 error codes, won't turn off, or has no oven heat, the electronic control board likely failed. Moderate DIY repair in 1-2 hours.

Fix a fridge that has power but won't cool. This inverter board controls your compressor motor and regulates cooling. Moderate DIY repair in 1-2 hours.

This UI board assembly replaces the refrigerator's user interface/control board to restore button response and display feedback. It lets you reliably set temperatures and modes so the appliance accepts and shows commands correctly. What it does:

• Receives and processes user inputs from the control panel (buttons/touchpad) so selections register and run.
• Drives the front display and indicator lights so temperature, mode and status information is visible.
• Replaces a failed or intermittent interface that causes unresponsive controls, blank or garbled display, or incorrect status indications.
• Works with the main control to pass commands; replacing the board can isolate interface-specific failures.

• Disconnect power to the appliance before starting — this part is electronic and may be damaged by live power.
• Take photos of existing wiring and mounting before removal to ensure correct reassembly.
• Handle the board by its edges and avoid static discharge; use anti-static precautions if available.
• Reconnect all plugs securely and test functions before fully reinstalling trim or covers.

Fix oven lights that won't turn off, error codes E75/E35/F15, or non-responsive controls. This control board restores normal range operation.

Fix CE error codes and alarm issues with this refrigerator main control board. DIY-friendly repair, typically installed in 30-45 minutes with basic tools.

Microwave won't turn on, made popping noise, or smells like burned electrical? The noise filter often fails when solder joints arc or short out.

Dryer won't start, stops mid-cycle, or displays error codes? The control board monitors temperature, moisture, and cycle timing. Moderate DIY repair.

This replacement board-switch is the electronic control that manages user inputs and basic appliance functions, restoring reliable response from the control panel. Use it to replace a faulty board causing unresponsive or erratic controls. What it does:

• Routes user inputs to the appliance's control system so buttons, knobs or touchpads register correctly.
• Activates internal relays/outputs that initiate functions; failure can cause controls to be unresponsive or commands not to execute.
• Helps stop intermittent or erratic behavior caused by a damaged or corroded control board.
• Resolves symptoms such as non-working control buttons, blank or flickering display, or inconsistent function selection.

• Always disconnect power at the breaker or unplug the appliance before starting work to avoid shock.
• Handle the board by its edges and avoid touching components; use an anti-static strap if available.
• Keep track of screws and wire connections; label or photograph harness locations before removal for correct reassembly.

This electronic control board replaces a failed main control to restore normal appliance operation and user-interface response. It manages core functions so the appliance cycles and settings respond correctly. What it does:

• Receives user inputs and sends commands to major components
• Controls timing for cycles and defrost functions to help maintain proper operation
• Regulates system responses to sensor signals for temperature and system state
• Can resolve symptoms such as unresponsive display/buttons, unit not cycling, or intermittent operation

• Disconnect power to the appliance before beginning work to avoid shock or damage
• Handle the board carefully; avoid electrostatic discharge and do not bend components
• Match the manufacturer's part number and connector layout before installing

Fix error codes, cycle stopping, or lights blinking on your dishwasher. This control board manages washing, draining, and drying functions.

Fix F90 error codes, intermittent operation, or unresponsive oven controls. This range control board restores full electronic function to your oven.

Fix a dryer that won't start, stops mid-cycle, or has no display. This main control board manages all electronic functions. Moderate DIY repair.