General Electric Door, Door Glass & Parts

A 12" replacement glass door that restores a clear viewing window for your appliance and helps contain heat. Designed as a direct-fit OEM replacement to maintain original appearance and function. What it does:

• Replaces damaged, cracked or cloudy door glass to restore safe, visible operation
• Helps contain heat and splatter inside the appliance for efficient cooking/operation
• Restores the appliance's original look when the existing glass is scratched or discolored
• Reduces drafts and maintains proper door seal performance when glass is intact

• Handle with care; glass can chip or break—wear cut-resistant gloves and eye protection
• Follow the appliance manufacturer's disassembly/reassembly instructions
• Do not overtighten hardware when reinstalling; use original screws and clips if available

This inner oven door glass replaces a cracked or cloudy panel to restore a clear view into the oven cavity and help the door seal properly. It fits into the oven door assembly and restores safe, functional operation. What it does:

• Replaces damaged, cracked, or discolored inner oven door glass
• Restores visibility so you can monitor cooking without opening the door
• Helps maintain the oven door seal and proper heat containment
• Prevents loose glass fragments that could fall into the oven cavity

• High-level replacement: typically accessed by removing the outer door panel; follow the oven model's service manual
• Handle glass carefully; wear cut-resistant gloves and eye protection
• Disconnect power and allow the oven to cool fully before starting work
• If clips, brackets, or adhesive are required, obtain the specific hardware for your door variant

This inner door ring secures the door glass and surrounding trim for compatible GE front-load washer/dryer doors, restoring a secure fit and helping the door close and seal correctly. It replaces a cracked, broken, or missing inner door ring. What it does

• Holds the inner door glass and trim in place to maintain door alignment and appearance
• Prevents rattling or movement of the door glass during operation
• Helps the door seat properly to reduce gaps that can cause leaks or drafts
• Restores a finished look when the original ring is scratched, cracked, or damaged

• One inner door ring

• Disconnect power before starting any repair to prevent shock or injury
• Remove the door assembly or inner trim as needed to access fasteners; keep track of screws and clips
• Use appropriate hand tools and a non-marring surface to avoid scratching the glass or door finish
• Inspect door glass and outer trim for damage while replacing the ring; replace any damaged components for proper fit and sealing

This cover door is an access panel that restores the appliance's exterior finish and protects internal components from dust and debris. It provides a secure, finished closure for the service opening. What it does

• Covers and protects internal components behind the service opening
• Allows controlled access for servicing when removed
• Prevents debris, lint, or small objects from entering internal areas
• Stops rattling or loose-fit noise caused by a damaged or missing panel
• Restores the appliance's finished appearance and safe closure

• One cover door

• Disconnect power (and fuel supply if applicable) before servicing
• Installation typically requires basic hand tools (screwdriver); keep fasteners for reassembly
• Handle edges carefully; wear gloves to avoid cuts on metal parts
• If alignment or fit is poor after installation, check mounting points and fastener torque

This glass display is the replacement front glass for the appliance control panel. It restores a clean, readable surface for the controls and protects the underlying electronics from spills and debris. What it does:

• Replaces cracked, scratched, or chipped control panel glass to improve appearance and readability
• Protects the control board and touch/button assembly from spills, grease, and light impact
• Helps maintain proper user interaction with the oven/range controls when the original glass is damaged
• Matches the OEM shape and mounting points for a like-for-like fit when installed

• Disconnect power (unplug or shut off circuit breaker) before starting any work
• Remove control console trim and any fasteners carefully to avoid chipping the glass
• Handle glass edges with caution; wear cut-resistant gloves and eye protection

The Inner Oven door glass is an OEM replacement part for GE ranges. Located inside the oven door cavity behind an outer steel panel, the inner glass allows viewing food without opening the door for temperature checks. As an insulating barrier, it separates intense oven heat from exterior door surfaces. 

Causes of a bad inner door glass can include cracks or chips from heavy impacts over time, scratches clouding visibility, or breaks compromising insulation integrity. 

Symptoms of a bad inner door glass include:

• Inability to see cooking progress without opening the door 
• Noticeable increase in exterior door temperatures during baking
• Possible oven heat loss if broken glass disrupts insulation values
• Stress cracks spreading that threaten larger pane failures

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore wall oven models.

The Door Panel is an OEM part for GE microwaves. It forms the outer layer of the microwave door, providing both aesthetic appeal and protection for the inner components. This is a white outer door panel for a microwave. For the black panel, order WB55X10813.

Causes of a bad door panel can include physical damage from impacts or accidents, exposure to high heat, or wear and tear over time. Cracks, dents, or discoloration can compromise the panel's integrity and affect the microwave's performance.

Symptoms of a bad door panel include:

• Visible cracks or dents
• Difficulty in opening or closing the door
• Poor sealing, leading to heat or steam escaping
• Changes in the microwave’s appearance or functionality

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: This part has one piece of glass. Per factory, it only requires one glass because it is used on non-self clean models.

Upper window pack assembly that replaces a cracked or damaged refrigerator door window panel, restoring appearance and helping protect the components behind the outer window. What it does:

• Replaces the upper door window pack to restore a clear, finished exterior on the appliance door.
• Addresses visible damage symptoms such as cracked, scratched, cloudy or broken window panels.
• Protects internal door components from exposure to moisture and debris.
• Matches the OEM-style mounting points for a like-for-like replacement when used with the correct model parts.

• Disconnect power and remove food from the door area before starting any repair.
• Handle the window pack carefully; wear cut-resistant gloves and eye protection when removing broken or cracked pieces.
• Remove any trim or fasteners per the appliance's service instructions; retain mounting screws and gaskets as needed.
• Refer to the OEM service manual or diagram for model-specific removal and reassembly steps.

Outer door glass for oven. Color: white. Glass has clear window.

This is a replacement over-the-range microwave door assembly that restores the door's fit and appearance while maintaining proper latching and heat shielding. Installs in place of a damaged or cracked door to help the microwave operate safely. What it does:

• Replaces a damaged, cracked or bent microwave door to restore proper closure and latch engagement
• Reinstates the exterior finish and viewing window so you can check cooking without opening the door
• Helps maintain the oven's heat containment and prevents steam or smoke from escaping
• Recommended when the door frame, glass or latch mechanism are visibly broken or the door won't close securely

• Disconnect power to the microwave and follow manufacturer service instructions before beginning any work
• Handle glass components carefully and wear gloves to prevent cuts
• Typical installation requires removing the microwave trim and fastening the door assembly with screws; retain original hardware when possible