Hose Or Tube

This water tube routes water from the supply to the refrigerator dispenser or ice maker so cold water and ice can flow properly. Replace a cracked or clogged tube to stop leaks and restore water delivery. What it does:

• Directs water from the house supply valve to the dispenser and/or ice maker.
• Commonly replaced for leaks, visible cracks, or frozen/clogged lines.
• Helps restore normal water flow when the dispenser or icemaker is not getting water.
• Works with the refrigerator's internal water plumbing and fittings.

• Turn off the refrigerator and shut off the water supply before beginning work.
• Depressurize and drain the water line to reduce spills; have towels handy.
• Use the correct fittings and tighten securely—do not overtighten plastic fittings.
• Check all connections for leaks after installation and restore power only when safe.

Kit contains two 10 feet inlet hoses.

This water injector fill hose connects the household water supply to the refrigerator's water/ice system, restoring reliable water flow for dispensing and ice production. Designed as a direct replacement to restore proper fill operation. What it does:

• Delivers water from the inlet to the ice maker/water dispenser assembly.
• Restores proper water fill for ice production and dispenser use when the hose is damaged or leaking.
• Helps stop leaks, sputtering dispensers, or slow/irregular ice fill caused by cracked or blocked tubing.
• Works with the refrigerator's injector/fill pathway to maintain consistent water delivery.

• One water injector fill hose.

• Disconnect power and shut off the water supply before installing.
• Inspect and replace any worn clamps or connectors; tighten fittings to prevent leaks.
• Avoid kinking the hose; route it following the original path to prevent flow restriction.

Stores and channels water from supply line to dispenser and ice maker. Replace if cracked, leaking, or damaged to restore proper water routing in your unit.

This is a rubber or plastic hose that connects the water inlet valve to the detergent or fabric softener dispenser in the washing machine. It carries water into the dispenser housing to flush soap or additives into the wash drum at the correct time during the cycle. Replace this hose if you see leaking near the dispenser area, the dispenser is not filling with water, or the hose shows cracks and deterioration.

Replacement water tube for refrigerators. Restores proper fluid routing when the original tube is cracked, leaking, or damaged. Direct fit installation.

Dishwasher drain hose kit connects the dishwasher pump to your home's drain system. Replace if cracked, leaking, or damaged. Includes clamp.

This water tube directs water from the refrigerator's inlet to the dispenser or ice system so water flows where it's needed. Replaces a cracked, clogged, or damaged supply tube to restore reliable water delivery. What it does:

• Channels water from the inlet valve to the dispenser and/or ice maker assembly
• Helps prevent leaks when intact; a damaged tube can cause visible water on the floor or cabinet
• Restores water flow when a blocked or split tube limits dispensing or ice filling
• Works as a direct-fit replacement when the OEM part number matches

• One replacement water tube

• Turn off the water supply and unplug the appliance before starting
• Release tubing fittings gently; replace any worn ferrules or clamps as needed
• Inspect fittings and check for leaks after reassembly; tighten to manufacturer torque recommendations

This tube union connector joins two water or refrigerant tubes to restore a sealed flow path and stop leaks. It's a direct-replacement plumbing fitting used on refrigerators and ice/water systems. What it does

• Joins two sections of tubing to maintain a sealed water line connection.
• Restores proper water flow to the dispenser or ice maker when a damaged union causes leaks or loss of supply.
• Provides a threaded/press-fit junction to prevent drips and reduce pressure loss.
• Helps avoid water damage from a cracked or corroded tube joint.

• One tube union connector

• Turn off the water supply and unplug the appliance before starting work.
• Confirm tube sizes and connection type before installation; tighten fittings per manufacturer guidance to avoid overtightening.
• Inspect tubing ends for damage and cut squarely if needed for a proper seal.
• After installation, restore water and power, then check the connection carefully for leaks.

Size: 6 foot long. Washers not included. This is one hose, for a set with washers order 285363. For inlet hose screen use 285452A and for inlet hose washers use 285448A

Routes wastewater from your refrigerator's defrost system to the drain pan. Replace if cracked, split, clogged, or disconnected to prevent leaks.

This installation kit includes the water supply line and fittings needed to connect a dishwasher to your home's water supply. It is used during initial dishwasher installation or when replacing a damaged or leaking supply line. Replace this kit if you notice water leaking at the connection point or if the existing supply line shows signs of wear or corrosion.

Water outlet pipe connects water dispenser system inside your refrigerator. Replace if cracked, leaking, or broken to restore proper water flow routing.

Water pipe assembly that routes water between the filter, dispenser, and ice maker. Replace if cracked, leaking, or damaged during service or cleaning.

Prevents backflow from sink into dishwasher drain line. Replace if cracked, leaking, or missing. Installs at sink edge to create air break.