Need Help?
Call or text
Hinge lever mounts on the refrigerator door to guide smooth opening and closing. Replace if cracked, broken, or worn to restore proper door alignment.
Replaced lower hinge assembly (#AP4438177) Read more
Replacement actuator arms for refrigerator ice and water dispensers. Includes both paddles. Needed when arms are broken, cracked, or missing.
Took water and ice panel apart and replaced actuator with new one. took about 15 minutes. very easy fix! Read more
Cup-activated lever that controls ice dispensing on side-by-side refrigerators. Replace if cracked, broken, or unresponsive to restore dispenser function.
Front lever for refrigerator freezer door ice dispenser. Press with a glass to activate ice dispensing. Replace if cracked, broken, or sticking.
The video was helpful and took about 5 minutes Read more
Adjustable humidity control slider for refrigerator crisper drawer covers. Replaces cracked, broken, or missing controls to restore smooth vent operation.
This was a simple replacement of the crisper drawer and humidity control sliding switch; easy to snap into place and align with the tracks. Read more
White plastic paddle lever for the freezer door ice dispenser. Replaces cracked, broken, or missing paddles to restore clean appearance and operation.
After reading posts on the problem I concluded that the motor and solenoid was OK because I was getting water shooting out in the water line before the water entered the freezer door. At the bottom of the door there is a quick disconnect to check the water before it goes into the freezer door. So, I concentrated on looking at the mechanism that dispensed the water because I read a post that said that the water usually freezes right in the hose before it comes out of the dispenser. I used a... Read more
Motorized actuator that opens and closes the refrigerator ice dispenser door. Replace if door won't open, closes slowly, or plastic gears are cracked.
Replaces the plastic paddle lever that activates water dispensing on your refrigerator door. Needed when the actuator breaks, cracks, or snaps off.
Removed the water and ice dispenser from the freezer door and replaced the part Some screws were rusted and were hard to remove The ice dispenser was surprisingly dirty so the entire unit had to be cleaned. The electrical connection on the face plate pulled off during disassembly. Your customer rep. helped me with that. The videos were a BIG help. The refrigerator did not completely come back on when power was restored, Turning off the power for about 15 minutes reset the computer and solved... Read more
White plastic housing shield for refrigerator ice/water dispenser assembly. Replaces cracked, broken, or damaged dispenser housing covers and frames.
Replaced dispenser kit and auger. Repair videos were a great help and resolved potential problems that I usually solved by trial and error. Thanks, Appliance Part Pros! Read more
Dispenser paddle assembly for side-by-side refrigerators. Installs on the door to activate water and ice dispensing. Replace if cracked or broken.
Replaces broken or cracked fresh food door lever assembly on side-by-side refrigerators. Installs with a Phillips screwdriver and pliers in minutes.
I purchased the parts for the door closer mechanisms on my model of side by side refrigerator. I also purchased the parts for the freezer side for future use if needed. I watched the video with my 16 year old daughter (incidentally the same age as the refrigerator) and she said she wanted to do the repair by herself! I provided her with the tools and the parts and less than 20 minutes later she proudly showed me the successful repair! The hardest and most time consuming part was getting the new... Read more
Replaces the freezer door lever assembly on side-by-side refrigerators. Installs on freezer door. Needed when original lever is broken or cracked.
With the Appliance Parts Pro youtube instructions, the fix was simple Read more
Connects the actuator to your refrigerator's ice chute door. Replace if cracked, broken, or worn to restore proper door operation and seal.
I used the video posted on site...note on my model trim bezel did not have to be removed! Read more
Internal lever that connects the dispenser paddle to the switch mechanism in your refrigerator door. Replace if broken, cracked, or missing for firm paddle.
Easy replacement Read more
Replaces cracked, warped, or melted ice dispenser funnel in side-by-side refrigerator doors. Guides ice from chute to cup, preventing spills.
The hinge broke on the ice dispenser funnel and housing. I took them off and replace them, putting the old switches and bulb in the new housing. It took some time to put the return spring back because it does not appear in the assembly diagram. Once working, it secures to the door with 4 screws, and worked as it should. The support slide inside the freezer is held with two 1/4 in screws that were taken off with a nut driver. the rear screw is hard to get at. The new bracket just screws on, and... Read more
White dispenser lever paddle for refrigerator water and ice dispensers. Replaces broken, cracked, or worn paddles with damaged clips or hinges.