Touch Pad

This is the main electronic control board (PC board) that manages the operating functions of a room air conditioner, including temperature settings, fan speeds, and mode selection. It receives input from the touch pad or control panel and controls the compressor and fan circuits accordingly. Replace this board if the unit does not respond to button presses, displays error codes, or fails to turn on despite receiving power.

White control panel frame with integrated touchpad for microwaves. Replaces cracked, discolored, or damaged front control panels. Direct fit assembly.

Control panel assembly with integrated touch overlay for your microwave. Mounts on the front face. Replace when buttons are cracked, worn, or unresponsive.

This backguard kit replaces the upper rear panel and trim on compatible ranges to restore a clean appearance and protect wall and controls from spills and heat. It's a direct-fit exterior repair for damaged, bent, or corroded backguards. What it does:

• Replaces the upper rear backguard panel and trim to restore the range's finished rear appearance
• Protects the control area and wall from splashes, grease, and heat exposure
• Helps stop drafts and gaps behind the range that can collect debris
• Addresses visible damage like dents, rust, or cracked trim

• Disconnect power to the range (unplug or switch off breaker) before starting work.
• Installation may require lifting and aligning the panel; use a second person for safety on larger ranges.
• Use common hand tools; keep fasteners and mounting brackets from the old assembly if reusable.
• Follow the appliance manufacturer's service instructions for model-specific steps and torque values.

This backguard kit replaces the rear trim panel on compatible electric and gas ranges to restore appearance and protect the wall and control area from spills and splatters. Ideal for worn, bent, or damaged rear trim. What it does

• Covers the area behind the cooktop to block grease, steam and food splatter.
• Restores a finished appearance to the back of the range after damage or removal.
• Helps protect controls and wiring routed near the rear from direct splatter.
• Designed to attach to the rear of the range using existing mounting points.

• One backguard kit.

• Installation generally requires lifting or pulling the range forward; use a second person to avoid injury.
• Disconnect power before beginning work.
• Use caution around sharp sheet-metal edges and wear gloves.
• Follow the OEM parts diagram and hardware locations; replace any damaged mounting hardware.

This separator is a molded plastic divider that helps keep ice organized inside the ice bin for smoother dispensing and less clumping. It restores proper spacing so ice moves freely during dispense cycles. What it does:

• Divides and guides ice inside the ice bin to reduce jamming and clumping
• Helps improve ice feed into the auger or dispenser chute
• Reduces shifting and rattling of ice during door movement
• Restores intended bin geometry after a cracked or missing divider

• One separator

• Unplug the refrigerator or shut off power before working on the ice bin or dispenser
• Empty the ice bin and remove any loose ice to avoid spills during replacement
• Snap the separator into the molded slots in the ice bin; no tools typically required

Replace your oven's control panel touchpad faceplate if it's cracked, scratched, discolored, or worn. This overlay installs over the control board.

Replacement control panel touch pad for your microwave. Installs on the front exterior. Order when your existing touch pad is cracked, unresponsive, or worn.

Replace your oven's control panel touch pad when buttons become unresponsive, cracked, or worn. Restores full touchpad functionality and appearance.

This is the front-facing control panel overlay for a 27-inch wall oven in white. It surrounds the control knobs or touchpad and provides the labeled interface where you select oven functions and temperatures. Replace this panel if the surface is peeling, discolored, cracked, or if button labels have worn off and are no longer legible.

This is the front-facing control panel assembly for an oven, providing the surface where buttons, knobs, or touchpad overlays are mounted. It serves as the interface between the user and the oven's electronic control board. Replace this panel if the labeling is worn or unreadable, the panel is cracked or warped, or if buttons are unresponsive due to physical damage to the panel itself.

This electronic control board manages the heating, cooling, and fan operations in your air conditioning unit. It processes thermostat signals and controls the compressor, fan motors, and other electrical components. If your AC won't turn on, doesn't maintain temperature properly, or shows error codes, the control board likely needs replacement.

Replace your range's touch pad control panel if the original is cracked, damaged, or unresponsive. This cosmetic panel installs on the front console.

Replacement control panel frame for your microwave. This structural component houses the touchpad and display. Order a new frame if yours is cracked or damaged.