Touch Pad

This electronic control board replaces the refrigerator's main control module to restore reliable control of temperature, defrost, and compressor cycles. It fixes intermittent or non-responsive controls for better cooling performance and consistent operation. What it does:

• Receives user inputs and manages compressor, fans, and defrost timing to maintain set temperatures
• Controls display and status indicators so settings and alarms register correctly
• Stops erratic cycling and resolves symptoms like no cooling, unresponsive buttons, or blinking lights
• Helps correct error codes caused by failed or intermittent control signals

• One electronic control board (main control)

• Disconnect power to the appliance before starting work to avoid electrical shock
• Handle the board carefully; avoid touching contacts and use proper ESD precautions when possible
• Compare part number on the old board to ensure correct replacement before installing

Replaces the main control board touch pad on your air conditioner. Install this component when the original is cracked, unresponsive, or damaged.

This main control PWB is the appliance's primary electronic control board that manages user inputs and cycle functions, restoring normal control when a faulty board causes operational issues. What it does:

• Receives user commands and runs appliance control algorithms
• Powers and updates the touchpad/display and indicator lights
• Manages timing, relay switching, and communication with sensors
• Common symptom: appliance won't start, has a blank or erratic display, or shows control-related error codes
• Helps correct unresponsive buttons, intermittent operation, or unexpected cycle behavior when board failure is confirmed

• Disconnect power (unplug or shut off breaker) before accessing the control board
• Handle the PWB by its edges and avoid static discharge; use ESD protection if available
• Refer to the appliance wiring diagram and service manual for proper connector placement and safety procedures

Replace your dishwasher's control panel touch pad if the buttons are cracked, peeling, or plastic mounting posts are fractured. Direct-fit assembly.

User interface control panel for your refrigerator. Replaces a cracked, damaged, or unresponsive control surface to restore button and display operation.

This replacement insert restores the finished trim and proper fit where the original trim or panel insert is cracked, missing, or worn. It helps return a clean, secure appearance and supports adjacent panels. What it does:

• Replaces a damaged or missing trim/insert piece to restore appearance and fit
• Helps eliminate visible gaps and prevents adjacent panels from shifting
• Reduces rattling from loose trim pieces during operation
• Preserves the original mounting alignment for nearby components

• Disconnect power to the appliance before starting any work
• Remove any surrounding trim or panels carefully to access the insert; keep fasteners for reuse
• Install by aligning with existing mounting tabs/slots and secure with original hardware; do not force into place

Replace the control panel touch pad on your dishwasher. Mounts on the door to house buttons and display. Order a new touch pad if yours is cracked or worn.

This is an electronic control board (PC board) for a room air conditioner. It manages the unit's charging and operational functions, communicating signals from the touch pad to control cooling, fan speed, and temperature settings. Replace this board if your air conditioner is unresponsive to controls, displays erratic behavior, or fails to turn on.

White adhesive overlay for range control panel. Displays settings like Bake, Broil, Timer. Replace if cracked, peeling, faded, or worn from use.

Replace your microwave's touch pad panel if it's cracked, worn, or unresponsive. This control panel installs on the front console for easy navigation.

Replace your microwave's touch pad when buttons are unresponsive, cracked, or worn. This membrane switch installs on the control panel housing.

Replace your air conditioner's touch pad control panel if buttons are cracked, worn, or unresponsive. Installs on the front interface for user controls.

This electronic PC board controls key appliance functions and user interface signals so the unit responds correctly to button presses and cycles. Replacing a failed board restores electronic control without replacing other modules. What it does:

• Receives input from the control panel and sends commands to motors, valves, heaters, and lights
• Manages timing and sequence for cycles and electronic features
• Can cause symptoms like an unresponsive control panel, blank or erratic display, or failure to start cycles
• Helps resolve intermittent operation or loss of specific electronic functions when board failure is the confirmed cause

• One electronic PC board

• Disconnect power (unplug or trip circuit breaker) before starting work
• Handle the board by edges and avoid static discharge—use an ESD strap if available
• Verify connector orientation and seating; ensure all harnesses are fully engaged before testing
• Test appliance operation after installation; if other symptoms persist, further diagnostics may be required

This is the main electronic control board for a room air conditioner, managing compressor operation, fan speeds, temperature regulation, and user inputs. It mounts behind the control panel and connects to the display, sensors, and motor components. Replace this board if the air conditioner does not turn on, fails to respond to controls, displays error codes, or does not maintain the set temperature.

This is the main electronic control board (PC board) that manages the core functions of a portable or window air conditioner, including compressor cycling, fan speed, and temperature regulation. It processes input from the control panel and sensors to maintain the desired settings. Replace this board if the unit does not turn on, displays error codes, fails to cool, or if buttons and controls are unresponsive despite receiving power.

This printed circuit board serves as the main electronic control for the air conditioner, processing input from the touch pad and managing functions like temperature, fan speed, and mode selection. It mounts behind the front control panel and connects to the unit's sensors and components. Replace this board if the display is unresponsive, buttons do not register, or the unit behaves erratically.