Transmission, Brake & Clutch

This is a genuine OEM clutch assembly sourced directly from the manufacturer; it is used in lawn mowers and lawn tractors to engage the blades. When the gear lever is pulled, the clutch engages. This causes the pulley wheel to spring out and tighten the blades against the turning drive shaft pulley, which then causes the blades to spin. If the clutch assembly is not working correctly, the blades will not move to cut the lawn. If the blades will not engage or if they are stuck and won't disengage, the clutch assembly should be replaced. This can occur if the clutch assembly overheats. Excessive use and normal wear and tear can also be the cause of a bad clutch. Before working on the clutch assembly, make sure the engine has had time to cool off to prevent burns. Remove the fuel from the fuel tank and fuel lines. Remove the spark plug to prevent accidental engine starting. Park the machine on a flat surface and chock the wheels to prevent rolling. Remove and replace the clutch assembly, then reinstall all parts and fuel. Check the clutch after replacement to ensure it is working properly.This clutch assembly is sold as an individual unit. It is compatible with lawn tractors and tractors manufactured by Craftsman, Husqvarna, and Poulan.

KIT.TRACTOR CLUTCH.OG.1.125"

This is an electrical clutch with cable. It is a replacement part for lawn mowers. The electric clutch connects to and engages the blade of the mower. It does this by transferring engine power to the drive train and is controlled by a toggle switch.The clutch may wear through normal use or can break in an accident or from misuse. If this happens, the mower will not run correctly and the blade may not start at all. To make this repair, some disassembly of the mower is required. Always wear protective gloves when working near the blade, allow the engine to cool completely, and disconnect the spark plug to prevent the engine from accidentally starting.This clutch is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with equipment manufactured by Husqvarna.

This replacement part is a brake arm. It is a genuine replacement part made by Husqvarna. This brake arm is commonly found in different types of lawnmowers and allows the user to control the brake settings. This is an extremely important part of the lawnmower.A new brake arm might be needed if the current one is no longer connected to the machine. If the brake arm is damaged in any way, it might be difficult to operate the machine appropriately. If this is the case, it is recommended that the current part be replaced immediately. Be sure to wear working gloves during this repair. This part is sourced directly from the manufacturer and is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is meant to fit different lawnmowers.

The clutch drum assembly is an important part of the chainsaw. When the clutch has been engaged, the assembly will turn and move the chain around the bar. Without this assembly, the chain would not move, and the chainsaw would not be usable. It is important for chainsaw owners to check the performance of their clutch and clutch assembly regularly to look for signs of wear and tear or issues with the performance. Often, the clutches will continue to work past the point when they should be replaced. It is safe and wiser to replace the clutch assembly as soon as any issues are noticed. Replacement of the clutch assembly will require a set of wrenches. Start by removing the chain brake, the bar, and the chain. Remove the cover and the sparkplug. Bind the piston to remove the clutch without having it spin. Remove the clutch and add the new assembly. Seat the clutch, unbind the piston, and then secure the bar, chain, and the chain brake. Tension the chain and then test out the new clutch. This is a genuine OEM part sourced from the manufacturer. It will work with many models of chainsaws from Husqvarna, Poulan, and Craftsman.

A clutch on a chainsaw is what enables the engine to turn a low RPM without the chain moving. It is a crucial component for operating the device safely. Without it, the blade or chain spins continually and leaves operators at risk for harm or injury. The clutch on any chainsaw works automatically and does not have a control or trigger to activate it. If your chainsaw is not automatically idling without halting the chain spinning, it could be time for a new clutch assembly. It requires only a screwdriver to do the repair This is a full replacement clutch assembly for chainsaws made by Husqvarna, Poulan, Craftsman, and several other brands. This OEM part is complete and features the clutch shoes and spring. It is an individual component and is not shipped with other hardware..

This part is a clutch kit that is used for lawnmowers and lawn tractors. A clutch is a safety device that makes the blade stop spinning while the engine is still running. This part is manufactured out of a heavy-duty metal material.A new clutch kit may be needed if the lawn tractor or lawn mower is stalling. Over time, the clutch may become worn or damaged and need to be replaced as part of normal wear and tear on the product. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This clutch kit is a genuine Husqvarna part. It is sold individually. This particular clutch kit is compatible with lawnmowers and lawn tractors that are manufactured by the Husqvarna and Poulan brands.

This is a rubber wheel ring that attaches to the wheel hub. Rubber wheel rings are also often called friction rings. The rubber wheel ring/friction ring meshes with the friction disc. This is what causes the drive wheel axle to turn. This is an integral part of the wheel movement.A new rubber wheel ring may be needed if the existing part is visibly damaged. The operator may also notice a grinding noise when the rubber wheel ring is starting to go bad. This may need to be replaced over time after normal wear and tear. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This rubber wheel ring is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This rubber wheel ring is compatible with snowblowers manufactured by Husqvarna, Poulan, and Jonsered.

This is a transmission designed for use with lawn mowers with a self-propel feature. The transmission is used to take power in the engine and move it to the wheels. It also controls the torque to manage the lawn mower's speed based on current conditions. If the transmission is damaged or worn, the pulley may continue spinning while the wheels refuse to turn.Several tools are needed for the replacement, including pliers, a drill, a nut driver, a socket wrench set, and work gloves. First, make sure the spark plug wire is disconnected. Remove the fuel tank cover, place a bag over the opening, and replace the cap. Remove the driver cover before releasing the ground drive belt from the pulley. Release the drive control cable from the post and take off the front wheels. Access and remove the transmission. Install the new part in the same location and reassemble.This is an authentic OEM Husqvarna transmission that is sold on an individual basis. It is compatible with lawn mowers and lawn tractors made by Husqvarna and Craftsman. The part comes with all needed axles and gears.

This part is a replacement clutch collar. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective clutch collar in tillers.The clutch collar is an essential component that ensures the equipment's clutch is able to function properly. If the clutch collar is broken or faulty in any way, the user may struggle to change gears and properly control the tiller. Thus, this part will require replacement. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this clutch collar, the appropriate owner's manual and equipment diagrams should be referred to. This clutch collar is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with tiller models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This replacement part is a gear spur, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Gear spurs are found inside many different types of machinery and are important to the overall workings of the device. Gear spurs are different from other gears as they have ridges along the edges allowing the gears to turn in one direction rather than the other. A new gear spur might be needed if the user hears unusual noises coming from inside of the engine. It is possible that the ridges on the outside of the gear can become stripped overtime and it might be best to replace this part. Be sure the engine is completely powered off before starting this repair as it can become dangerous if the gears are activated. This part is a genuine OEM replacement part. This gear is sold by itself and sourced directly from the manufacturer.

This clutch collar is an authentic OEM part sourced directly from the manufacturer for use in lawnmowers and lawn tractors. If there are problems with the lawnmower jerking and sputtering after changing gears, the clutch collar should be removed and replaced to keep the lawnmower running properly. The clutch collar is part of the clutch bearing. The clutch collar is used between bevel gears as spacers and allows them to move in sync with the pinion gear. If the clutch collar is deteriorated, broken, or missing, a new one should be installed.Make sure the lawnmower is on a flat surface. Remove the spark plug and disconnect the battery. A screwdriver, pliers, socket set, wrench set, and nut driver are required to make this repair. Take the transmission out of the lawnmower. Open the case on the transmission and remove the broken clutch collar. Install the new clutch collar. Reverse the process to reassemble the lawnmower. This clutch collar is a high tensile metal part that is sold individually. It is designed for use in lawn tractors manufactured by Craftsman.

The gearbox assembly is found in tillers and is where the gears are housed that supply the drive and torque for the unit. The gearbox assembly is designed to provide protection for the gears and the other internal components, which are responsible for transferring energy to increase torque and control speed. Although it is made of durable materials, it may become worn or damaged over time and require a replacement. This genuine OEM gearbox assembly is produced to exact manufacturer standards and made to be used in compatible machines from Yard-Man, Ryobi, Yard Machines, Bolens, Cub Cadet, and MTD. The gearbox assembly is sold as an individual assembly and comes ready to install with the four screws required for installation. Be sure to wear gloves and disconnect the power from the tiller before performing any repairs. Allow the unit to cool completely and follow the diagram to ensure that the replacement part fits exactly. This assembly will require a screwdriver and wrench set to replace.