Washer Belt

Length 43", for most Admiral, Crosley, Norge, and Magic Chef washers

This genuine OEM-style agitate and spin drive belt transfers motor power to the washer's transmission and tub, restoring normal agitation and spinning for effective wash and drain cycles. What it does:

• Wraps around motor pulley and transmission/tub pulley to drive both agitation and spin actions
• Replaces worn, glazed, cracked, or stretched belts that cause slipping or no spin
• Helps eliminate squealing or burning-rubber smells from a slipping belt
• Restores proper belt tension for consistent wash performance

• Disconnect power before starting any repairs to avoid shock or injury
• Inspect pulleys and idler/tensioner for wear and alignment; replace if damaged
• Route the belt per the washer's service diagram and verify proper tension before test running

This Drive belt keeps the washer's transmission and tub turning by transferring motor power to the drum. Replaces a worn or broken belt to restore normal agitation and spinning performance. What it does:

• Transfers motor torque to the transmission/drum so the washer agitates and spins
• Stops slippage that can cause slow or no spin/agitate cycles
• Helps eliminate squealing or burning-rubber noises when the belt is worn
• Prevents further motor/drive damage from a broken or glazed belt

• Disconnect power and water supply before starting any repairs
• Remove access panels and shift the drum to relieve belt tension for removal
• Inspect pulleys, idler, and motor shaft for wear or debris before installing the new belt
• Route the belt according to the OEM diagram, then test run the machine

This main drive belt transfers motor power to the appliance's drum/transmission so the tub spins reliably. It replaces a worn or broken belt to restore normal drum rotation and eliminate slipping. What it does:

• Wraps around the motor pulley and drum/transmission to convert motor torque into drum rotation
• Restores normal spin if the drum slips, won't turn, or makes a high-pitched squeal when starting
• Prevents further wear on motor and pulleys caused by a stretched or frayed belt
• Works with the appliance's existing pulleys and idlers to maintain correct tension

• One main drive belt

• Disconnect power (and water, if applicable) before beginning service
• Access panels and routing vary by model—refer to your service manual or belt routing diagram
• Inspect pulleys, idler(s), and drum seals for wear; replace any damaged parts to avoid repeat failure
• After installation, run a short cycle to confirm smooth, quiet operation

This V-shaped drive belt wraps around the dryer drum and motor pulley to transfer motor torque and rotate the drum for normal tumbling. It restores proper drum rotation and helps eliminate slipping or squealing. What it does:

• Transfers motor power to the drum so the dryer tumbles clothing evenly
• Maintains correct belt tension and alignment for smooth operation
• Worn or broken belts can cause the drum to stop turning, slip, or make squealing noises
• Replacing a damaged belt prevents further wear to pulleys and motor strain

• Disconnect power (unplug electric or shut off gas and electrical supply) before starting any repair
• Inspect the idler pulley and motor pulley for wear; replace if worn to prevent premature belt failure
• Route the belt around the drum and pulley per the dryer's belt routing
• After installation, run the dryer briefly to confirm proper tracking and noise-free operation

This is a replacement drum drive belt that turns the dryer drum so clothes tumble and dry evenly. A direct-fit belt for restoring normal drum rotation and preventing slipping or squealing. What it does

• Wraps around the dryer drum and drive pulley to transfer motor power to the drum.
• Keeps the drum rotating smoothly to ensure even drying and prevent overheating.
• Designed to match OEM fit and length for proper tension and long wear.

• Disconnect power (and gas supply if applicable) before starting any repair.
• Inspect pulleys and idler for wear when replacing the belt; replace any worn parts to prevent repeat failure.
• Follow the dryer's service manual for belt routing and correct tension.

This is a replacement drum drive belt for compatible Bosch dryers. It transfers motor torque to the dryer drum so your load tumbles evenly, restoring normal drying performance when a belt has failed. What it does:

• Wraps around the dryer drum and motor idler to rotate the drum during operation
• Replaces a stretched, frayed, or broken belt that stops the drum from turning
• Helps eliminate loud squealing or slipping caused by a damaged drive belt
• Restores consistent drum rotation for more efficient drying cycles

• One replacement drum drive belt

• Disconnect power (and gas for gas dryers) before accessing internal components
• Inspect idler, motor pulley, and drum rollers for wear and replace if damaged
• Route belt per the dryer's service diagram; tension and alignment are critical for quiet operation

This V-type dryer belt powers the drum, transferring motor torque to rotate the drum for proper drying. Replaces worn or stretched belts to restore consistent drum rotation and improve drying performance. What it does:

• Wraps around the dryer drum and motor/idler to drive drum rotation
• Restores drum movement when original belt is broken, frayed, or slipped
• Helps eliminate noisy slipping or intermittent spinning caused by a loose belt
• Supports even tumbling so clothes dry more consistently

• Disconnect power (and shut off gas for gas dryers) before beginning any repair
• Observe belt routing around the drum, idler pulley, and motor pulley—refer to your model's diagram
• Inspect drum rollers, idler, and motor shaft for wear; replace if worn to prevent premature belt failure
• Use proper hand protection and avoid forcing parts

The Drive Belt is an OEM part for Frigidaire washing machines. This part transfers the rotational force from the motor to the drum, enabling the tumbling action during wash cycles.

Causes of a bad Drive Belt include wear and tear over time, exposure to excessive heat or moisture, or physical damage from improper installation or foreign objects.

Symptoms of a faulty Drive Belt include:

• Loud squeaking or grinding noises during the wash cycle
• The drum not spinning or rotating properly
• Slipping or failure to agitate during wash cycles
• Excessive vibrations or shaking from the washer

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.