Cable Or Retainer

This insulated wire retainer secures wiring and wiring harnesses inside the appliance to prevent rubbing, chafing, and accidental contact. It helps keep wires routed and protected for safer, more reliable operation. What it does:

• Clips wiring or harness to chassis mounting points to hold wires in place
• Prevents wires from contacting sharp edges or moving parts that can cause wear
• Reduces risk of shorts or intermittent connections caused by chafed insulation
• Keeps wiring neatly routed for easier service and longer component life

• Disconnect power to the appliance before servicing.
• Locate the damaged or missing retainer on the appliance frame or harness mounting tab.
• Route the wire or harness into the retainer and press until the retainer snaps into place; no special tools are typically required.
• Replace any wiring with damaged insulation and secure fit before restoring power.

This back insulation retainer secures the oven's rear insulation in place, keeping insulation from shifting and reducing rattling. It helps maintain proper oven cavity protection and a quieter operation. What it does:

• Holds the rear insulation securely against the oven back panel
• Prevents insulation from sagging or falling into the cavity
• Reduces rattling or vibration caused by loose insulation
• Helps the insulation stay in the correct position for safe operation

• One back insulation retainer

• Disconnect power (unplug or switch off breaker) and allow the appliance to cool before beginning.
• Access typically requires removing the oven's rear panel; keep fasteners organized for reassembly.
• Wear gloves and eye protection when handling insulation and sharp sheet metal edges.

This is the door balance cable assembly for a dishwasher. It links the door hinge to the tension spring so the door opens smoothly and stays balanced, helping prevent a heavy or slamming door.

• Connects the door hinge to the spring to counterbalance door weight
• Helps the door open/close smoothly and stay in position
• Common failure symptoms include a door that drops quickly, feels heavy, or won't hold half-open
• A snapped or frayed cable may be visible near the lower side of the cabinet

• Disconnect power and shut off water before servicing
• Support the door and use caution—hinge springs are under tension
• Note the original cable routing over pulleys and through guides; reinstall the same way
• Some models use a cable on each side; check your model and order quantity as needed

Drain hose retainer keeps the appliance's drain hose securely fastened to the cabinet or pump, helping prevent the hose from slipping loose. Replacing a broken retainer reduces leaks and improper draining caused by a detached hose. What it does:

• Secures the drain hose to the cabinet, pump outlet, or drain connection to maintain correct hose positioning.
• Helps prevent water leaks and hose disconnection during drain cycles.
• Common symptoms of a failed retainer: visible hose movement, water at the rear or floor, or intermittent draining issues.
• Replaces worn or broken retainers that no longer hold the hose firmly.

• Always disconnect power and turn off water before servicing the appliance.
• Access may require moving the appliance or removing a rear/access panel to reach the hose retainer.
• Seat the drain hose fully in its proper position, snap or clip the retainer into place, and verify the hose is secure and not kinked.
• Inspect the drain hose for cracks or wear while replacing the retainer; replace the hose if damaged.

The Dishwasher Door Spring is an essential component designed to restore the functionality of your Samsung dishwasher. This genuine OEM part ensures that your dishwasher door operates smoothly, providing the right tension for easy opening and closing. Crafted with high-quality materials, the Dishwasher Door Spring is built to last, offering durability and reliable performance over time. Its precise design guarantees a perfect fit with a variety of Samsung dishwasher models, making installation straightforward and hassle-free. By choosing this genuine OEM part, you can trust that your appliance will maintain its original performance and efficiency, helping to extend its lifespan. Whether your current door spring is worn out, broken, or missing, the Dishwasher Door Spring is the ideal solution to restore your dishwasher's proper operation. Enhance your dishwasherGÇÖs reliability and enjoy a seamless user experience with this dependable and high-quality replacement part.

A small metal retainer spring that secures trim and lightweight components so panels and shelves stay aligned and do not rattle. Replaces a worn or broken spring to restore a snug, reliable fit. What it does

• Holds trim, panels or lightweight components in position to prevent sagging or separation
• Stops rattling and vibration caused by loose parts
• Restores correct alignment of removable trim or small assemblies
• Helps maintain proper component engagement during normal use

• One retainer spring

• Disconnect power (unplug or switch off circuit) before working on appliances
• Use basic hand tools; access may require removing adjacent trim or clips
• Handle spring and surrounding trim carefully to avoid scratches or damage
• Replace damaged or missing mounting hardware before reassembly

This left-hand chill pan linkage connects and supports the refrigerator's chill-pan assembly so the drawer and cooling components move smoothly. Replaces a worn or broken linkage to restore proper drawer alignment and operation. What it does:

• Couples the chill pan/drawer to the cabinet frame so the drawer opens and closes evenly
• Maintains correct positioning for the chill pan to help full drawer travel
• Can resolve symptoms like a drawer that sticks, binds, or sits unevenly
• Helps prevent further wear on adjacent fasteners and guide components

• Designed for model-specific fit
• Use basic hand tools; supports straightforward replacement when access is available
• Disconnect power and empty the drawer area before beginning work to avoid injury
• Replace damaged mounting hardware or adjacent parts to ensure secure installation

This retainer secures appliance panels and components to keep assemblies aligned and stable, restoring proper fit and reducing noise or vibration. Use when a clip or bracket has broken, come loose, or no longer holds parts in place. What it does:

• Holds trim, panels or internal components in position to prevent rattling and misalignment
• Replaces worn or broken clips that allow gaps or loose parts
• Helps restore a snug fit after service or component replacement
• Works as a simple fastener to maintain proper assembly alignment

• Disconnect power to the appliance before beginning any repair
• Installation typically requires basic hand tools; handle small clips carefully to avoid losing them
• Inspect surrounding clips and mounting points and replace any damaged hardware