Dishwasher Control Board

This electronic control is the refrigerator's main control board that manages temperature, user display, and timed functions to restore reliable operation. Replaces a failed control to return the unit to normal cycle and user control. What it does:

• Regulates compressor, fans, and defrost cycles based on sensor inputs
• Powers and responds to the front control/display panel for temperature and mode settings
• Controls timed functions such as automatic defrost and ice maker cycles
• Resolves symptoms like unresponsive controls, incorrect temperatures, or intermittent cooling behaviors

• One electronic control (main control board)

• Disconnect power to the appliance before starting any work
• Handle the board by its edges and avoid touching components; discharge static by grounding yourself
• Reassemble panels and secure all connectors; restore power and run a function test

This electronic control board is the appliance's main control module that manages cycles, timing, and user-interface functions to restore normal operation. Replace a failed board to help resolve control, display, and cycle problems. What it does:

• Regulates cycle timing, motor and heater control, and other automated functions
• Interprets user commands from the control panel and runs selected cycles
• Sends/receives signals to sensors, relays, and displays for coordinated operation
• Commonly used to address symptoms like unresponsive controls, no or erratic display, or appliances that won't start or complete cycles

• Disconnect power before accessing the control area to avoid shock or damage
• Handle the board by the edges and avoid electrostatic discharge; use grounding methods if available
• Verify the board PN on the old part matches W10597041 before installing

A replacement electronic control module that manages the appliance's cycle functions and user commands, restoring reliable control and timing when the original module fails. Replaces a faulty control assembly to help return normal operation. What it does:

• Controls cycle timing, power distribution, and signals between sensors and the user interface.
• Replaces a failing control when the appliance won't start, is unresponsive to button presses, or stops mid-cycle.
• Works as the central command board that interprets inputs and runs programmed cycles.

• 1 Module control assembly

• Disconnect power (and water supply for washers) before attempting any repair.
• Handle the board by its edges and avoid touching components; use anti-static precautions if available.
• Reconnect all wiring harnesses and secure mounting hardware before restoring power.

This user interface housing is the front console shell that holds and protects the control buttons and display, restoring the appliance's look and secure fit for the control components. What it does

• Secures the control board, buttons and display in the appliance console
• Protects electronics from light impact, dust and everyday wear
• Restores proper button alignment and front-panel fit and finish
• Helps resolve issues caused by cracked, warped or broken console housing

• One user interface (UI) housing / front console housing

• Disconnect power to the appliance before starting any repair
• Removal typically requires detaching the console and transferring the display, buttons and any mounting clips to the new housing
• Handle with care to avoid scratching the finish or damaging snap clips and wiring

This is a dishwasher control board assembly. This component manages the functions of the dishwasher, which includes washing, draining, and drying. Since this part controls all of the functions of the dishwasher, if there are any problems with the operation it could be due to the control board assembly. This may include the washing cycle not running, the dishwasher not filling with water, or the detergent dispenser not opening during the washing cycle. If the user is unsure if this part is the culprit, a professional will be able to diagnose the issue. Unplug the dishwasher from its power source before replacing this part. The person performing the replacement may also wish to wear work gloves to protect their hands.This component is sold individually. It is compatible with dishwashers that are manufactured by Frigidaire, Whirlpool, and Electrolux. It is sourced directly from the manufacturer.

This electronic control board replaces the oven's main control module to restore user interface and timed bake/clock functions. It provides the control logic that manages heating cycles and display feedback for the range. What it does:

• Serves as the oven's primary control module, interpreting commands from the touchpad or knobs
• Controls bake/broil elements, timers, and display outputs through relay/signaling circuits
• Common symptoms: blank or unresponsive display, no heat or heating cycles won't start, or controls do not respond
• Replaces a failed or intermittent board that causes erratic oven behavior

• One electronic control board assembly

• Disconnect power at the breaker before beginning service to avoid shock or injury
• Handle the board carefully and avoid touching connector pins or components; static discharge can damage electronics
• Verify wire harness orientation and secure all connectors before restoring power.

The module control assembly is the appliance's electronic control board that manages cycles, timers and control functions. Replacing a failing board can restore responsive controls and correct cycle operation. What it does:

• Directs cycle selection, timers and communication to components so the appliance runs the selected programs.
• Manages signals between the user interface and internal parts; failures often cause unresponsive or intermittent controls.
• Common symptom linkage: unit won't start, cycles won't advance, erratic operation, or display/control errors.
• Interfaces with the control harness and panel to coordinate motors, valves and other driven components.

• Disconnect power to the appliance before servicing to avoid shock or damage.
• Handle the control board by its edges and avoid touching circuitry; use anti-static precautions if available.
• Verify harness connectors, fuses and wiring before replacing the board; confirm connector orientation and secure mounting.

This electronic control board is the main console controller that manages a range of appliance functions and restores responsive controls and displays. Replace a failing board to get timed cycles, settings and display feedback working again. What it does:

• Controls user interface, display and timed cycle logic for the appliance
• Sends signals to heating/motor components to start and stop operations
• Responds to touchpad or button inputs so selected settings run correctly
• Common symptom fixer: no display, unresponsive controls, or erratic cycle behavior
• Works with existing harnesses and sensors when compatible

• One electronic control board

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board by the edges and avoid touching circuitry to prevent static damage
• Reconnect all wire harnesses in their original positions; loose connections can cause faults

This electronic control module manages a range of oven/cooktop functions so the appliance responds correctly to front-panel commands and control inputs. Replacing a failed module restores normal control and display operation. What it does:

• Receives input from touchpads/knobs and sends signals to heating elements, relays, and sensors
• Controls oven timing, temperature setpoints, and cycle sequencing
• Powers or drives the display and indicator lights when working properly
• A failed module can cause unresponsive controls, blank or erratic displays, or interrupted heating cycles

• Disconnect all power to the appliance before starting work to avoid shock or damage
• Handle the board by its edges and avoid static discharge; wear a grounded wrist strap if available
• Verify connector orientation and seating; do not force connectors or components

This electronic control board replaces the refrigerator's main user interface control, restoring reliable temperature management and cycle sequencing. It lets the appliance receive user inputs and run timed defrost, compressor, and fan operations. What it does:

• Houses the control circuitry that manages cooling cycles, defrost timing and fan/compressor operation
• Responds to user input from the front control panel and translates commands to the appliance systems
• Can stop or reset erratic cycling, display control errors, or fix non-responsive controls when the board is faulty
• Common symptom: unresponsive control panel, incorrect temperatures, or failure to start compressor or defrost cycle

• High-level replacement only — disconnect power before accessing electrical components
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connectors are fully seated and wiring matches original locations before restoring power

The Electronic Control is an OEM part for Whirlpool dishwashers. It is responsible for controlling and coordinating the various functions of the dishwasher, including the wash cycles, water temperature, and timing.

Symptoms of a bad main control board include:

• The dishwasher not turning on or showing any signs of power.
• The dishwasher not completing a cycle or stopping mid-cycle.
• The control panel not responding to input or displaying error codes.
• The dishwasher not filling with water or draining properly.

A bad main control board can occur due to electrical malfunctions, component failure, or power surges. If you notice symptoms such as the dishwasher not powering on, cycle irregularities, or error codes displayed on the control panel, it may be time to replace the main control board.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This electronic control module assembly manages the dryer's cycle selection, timing and user interface so the dryer runs the selected program reliably. Replaces a failed control board to restore normal operation and controls. What it does

• Receives user inputs and starts selected dryer cycles
• Controls cycle timing, motor and heating signals per program
• Communicates status to the display and keypads/buttons
• Common symptom link: dryer won't start, won't advance cycles, shows control/display errors, or has intermittent operation

• Disconnect power before service to avoid shock—this is an electrical assembly.
• Handle the board by the edges and avoid static discharge; use proper ESD precautions if available.
• Verify harness connections and mounting before powering up; do not force connectors.

This electronic control module assembly manages washer operations and user controls, restoring cycle selection, timing and electronic functions so the appliance responds correctly to commands and runs programmed cycles. What it does:

• Receives input from the console and sensors to start, stop and advance wash cycles.
• Controls timers, relays and valves for water fill, agitation and spin sequences.
• Drives display and user interface signals so cycle selections and status are shown.
• A failing module can cause the washer to not start, not respond to controls, or show error codes.

• Disconnect power before servicing to avoid shock or damage to the new board.
• Handle the module by its edges and avoid touching circuitry; use ESD precautions when possible.
• Verify connector orientation and seating; confirm wiring harnesses match before power-up.