Dishwasher Control Board

This electrical control board manages an appliance's electronic functions and user commands, restoring proper cycle control and interface response. Replace a faulty control to stop erratic operation and regain reliable control of cooking or other timed functions. What it does

• Receives input from the console and executes selected cycles and settings
• Regulates cycle timing and communicates with sensors and relays to control heating or motor operations
• Helps prevent erratic or unexpected appliance behavior when functioning correctly
• Commonly linked to symptoms like unresponsive controls, error codes, or failure to start/complete cycles

• Disconnect power at the breaker or unplug the appliance before starting any work
• Handle the board carefully; avoid touching contacts and use anti-static precautions if available
• Verify wiring positions and take photos before disconnecting connectors for correct reassembly

The Cntrl-Elec is an OEM part for Whirlpool dishwashers. As the control and electronic component, it governs all of the major functions and operations of the dishwasher. The control board contains integrated circuits, microprocessors, and electronic components that facilitate cycles, temperature regulation, safety features, and user input.

Over time, the electronic components inside the controller can degrade or become damaged. Environmental factors like surges, fluctuations in power, and other electrical issues may also potentially cause failure. 

Symptoms of a bad controller can include:

• Not operating or cycling at all
• Inability to start or stop cycles
• Fault codes displayed
• Issues with heating or drying
• Buttons or control panel not responding

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The User Interface is an OEM part for Frigidaire dishwashers. It allows for cycle selection and monitoring cleaning progress.

Causes of failure can include normal wear reducing conductivity over thousands of cycles. Moisture ingress introduces contaminants degrading circuits. Mineral buildup restricts electrical pathways.

Symptoms include:

• Non-responsive buttons or faulty temperature/option displays
• Failure to advance properly through cleaning stages
• Inability to select custom options like heat dry settings
• Error codes shown without diagnostic abilities

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This mechanical dryer timer/selector replaces a worn or faulty control timer to restore cycle selection and timing. It lets the dryer advance through timed and automatic cycles so loads finish as intended. What it does:

• Provides cycle selection and timing control for dryer operations
• Advances the timer mechanism so selected cycles complete on schedule
• Can resolve symptoms like cycles that won't advance, no timed operation, or inconsistent cycle lengths
• Works as the user-operated control for start/stop and cycle changes

• One replacement mechanical timer/selector

• Disconnect power before starting—this part requires live electrical connections
• Basic disassembly of the control console may be needed; keep track of mounting screws and knobs
• Compare the old timer to this unit and transfer any knobs or mounting hardware if required

The Main Control Board is an OEM component specifically designed for LG dishwashers. This board is the "brain" of the dishwasher, utilizing built-in programs to operate all functions of the unit including wash cycles, heating elements, motor control, and more. 

Symptoms of a bad main control board can include intermittent or complete failure of wash cycles to run properly, inability to select certain options or unresponsive touch controls. Over time, electronic components are susceptible to damage from electrical surges or failures in associated parts.

Symptoms of a bad main control board include:

• Dishwasher fails to start or run cycles
• Inability to select options via touch controls  
• Display/interface errors such as flickering lights
• Strange sounds coming from internal components

This OEM LG part is also compatible with Sears/Kenmore. Replacing the main control board can help restore full functionality to your LG dishwasher.
 

The Control Board is an OEM part for Whirlpool dishwashers. As the central processing unit, this board regulates all cycles and component functions including wash and rinse settings, heating controls and the digital display.

Symptoms of a failed control board include:

• Inability to select or change wash/rinse options
• Cycles failing to complete through all settings
• Error codes displayed or unresponsive controls

Causes can be normal wear of electronic components over extended use. Exposure to fluctuating internal temperatures may also deteriorate electrical connections over time.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The OEM Electronic Control Board is an OEM replacement part for Whirlpool dishwashers. It is a circuit board that controls all of the functions of the dishwasher, including the wash cycles, water temperature, and detergent dispensing.

Causes of failure involve damage from liquid intrusion shortening circuits or component deterioration over extended use reducing precision.

Symptoms include:

• Dishwasher fails to start selected cycle
• Lights, displays or programming malfunctions
• No response from control buttons
• Dishwasher appears dead or powerless

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This electronic control board is the appliance's central controller. It interprets user inputs and sensor signals to power components at the right time, restoring reliable operation when the original board fails.

• Interprets user settings and manages cycle timing and temperature control
• Switches relays/outputs to run motors, heaters, valves, fans, and lights
• Interfaces with sensors and safety switches to protect the appliance
• Symptoms can include no display or response, won't start, cycles that won't advance, or erratic operation
• Logs diagnostic error codes to aid troubleshooting

• Disconnect power before servicing; follow ESD precautions and handle the board by the edges
• Access the control area, then note/photograph wiring and move connectors one at a time to the new board
• Mount securely, ensure no wires are pinched, reassemble, and restore power
• Run a diagnostic or test cycle to confirm normal operation

The Dishwasher Main Control Board Assembly is essential for managing the various functions of your dishwasher. This genuine OEM part ensures reliable performance and seamless operation of cycle settings, water temperature control, and drying processes. Designed specifically for Samsung dishwashers, this main PCB assembly guarantees perfect compatibility and a secure fit. By replacing a faulty control board with this high-quality component, you can restore your dishwasherGÇÖs functionality without the need for a complete unit replacement. The Dishwasher Main Control Board Assembly enhances the efficiency of your appliance, helping to maintain consistent washing results and extend the lifespan of your dishwasher. Installation is straightforward, allowing you to easily perform the repair yourself and save on service costs. Trust this genuine OEM part to deliver dependable control and optimal performance for your Samsung dishwasher, ensuring that every wash cycle operates smoothly and effectively.

Restore reliable cycle control with this electronic control board. It serves as the dishwasher's brain, coordinating wash, drain, and dry functions so the machine starts, runs, and completes cycles as expected.

• Orchestrates cycle timing and interprets sensor inputs
• Distributes power to components such as the wash motor, drain pump, and water inlet valve
• Communicates with the user interface to execute cycle selections
• Typical failure symptoms include: won't start or power up, cycles won't advance, stops mid-cycle, won't fill or drain, or control-related error codes

• Disconnect power at the breaker and turn off water supply before servicing
• Use ESD protection and handle the board by its edges only
• Access the control area, move wire connectors one at a time to the new board, and secure it in the original mounting
• Restore power and, if available, run the unit's diagnostic/service cycle to verify operation

This electronic control board is the appliance's main brain. It manages cycles and powers key components based on sensor and user input, restoring normal operation and responsive controls when the original board fails.

• Directs the appliance's operations by processing inputs from sensors and the user interface
• Distributes power to motors, valves, heaters, fans, and other loads as needed
• Monitors system status and logs/communicates fault or error codes
• Typical failure symptoms: won't start, unresponsive controls, stops mid-cycle, intermittent power, or recurring error codes

• Disconnect power to the appliance before servicing
• Use ESD protection and handle the board by its edges
• Photograph wire/connector positions; transfer connectors one at a time to the new board
• Ensure all harnesses are fully seated and the board is secured; run a diagnostic or test cycle after installation

3 digit

This Electronic Control Board is the appliance's central control module. It interprets inputs from sensors and switches and directs power to motors, valves, heaters, and fans to run cycles reliably when the original board has failed.

• Manages overall operation by processing signals and executing programmed cycles
• Sends power/commands to components such as motors, pumps, fans, heaters, and valves
• Typical symptoms of a failed board: no power or won't start, unresponsive controls, cycles that won't advance, intermittent shutdowns, or error codes
• Useful when diagnostics point to control failure after ruling out fuses, switches, sensors, and wiring

• Disconnect power before servicing; turn off water supply if applicable
• Use ESD protection and handle the board by its edges
• Photograph/label all connectors; move harnesses one at a time and transfer any jumpers/settings from the old board if present
• Mount securely, reconnect wiring, reassemble, then run the unit's diagnostic/self-test per the service manual