Dishwasher Touch Pad

This control panel is the front console where you select wash cycles and options on the dishwasher. It restores a clean, intact interface and reliable input when the original console is damaged or worn. What it does:

• Houses the dishwasher's user interface area for cycle and option selection
• Transmits user inputs to the electronic control to start and customize cycles
• Replaces cracked, warped, or cosmetically damaged consoles
• Helps with unresponsive or intermittent buttons, stuck keys, or inability to start a cycle when due to a failed console/touchpad

• 1 control panel assembly

• Disconnect power at the breaker before servicing.
• Open the door and remove inner door screws to release the console from the door assembly.
• Support the wiring; disconnect the connector(s) and transfer any reusable trims or hardware from the old panel.
• Install the new panel, reconnect, reinstall screws, restore power, and test all functions.

The Control Panel is an OEM part for Frigidaire dishwashers. Located at the front of the dishwasher door, the control panel features buttons and displays that allow for the selection and monitoring of wash cycles. Printed electronic circuits distribute input signals to initiate the appropriate cycle settings.

Causes of a bad Control Panel can include cracked or damaged screens, non-responsive buttons, or failures of internal electronic pathways over time. 

Symptoms of a bad Control Panel include:

• Faulty or unreadable display screens  
• Random cycle activation without input
• Repeated error codes or flashing lights
• Physical damage or loose components  

This genuine OEM Frigidaire part is compatible with some Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models as well.

This is the factory console assembly for the control area. It replaces a cracked or damaged panel and restores a secure, finished mounting surface so the appliance's knobs and switches stay aligned and operate correctly.

• Houses and supports the timer/controls so they mount securely
• Protects and organizes wiring within the control area
• Restores proper alignment for knobs and switches
• Replaces cracked, warped, or broken consoles that cause loose or misaligned controls

• Disconnect power before servicing; wear cut-resistant gloves when handling sheet-metal parts
• Remove control knobs and any retaining screws; lift off the old console
• Transfer your existing timer/control switches, brackets, and trim to the new console; take photos to document positions
• Reinstall and verify controls move freely and the console is firmly secured before restoring power

Color: Black

This control panel is the replacement console assembly that houses the user controls and front interface. It restores a clean, readable control surface so buttons and settings are easy to see and operate. What it does:

• Replaces a cracked, faded, or damaged control/console panel to restore the appliance's front interface
• Provides the mounting surface and openings for control buttons, knobs, and the display area
• Helps resolve symptoms like unresponsive or sticking buttons, hard-to-read labels, or a loose front console
• Matches the original white finish to maintain the appliance's appearance

• Always disconnect power (unplug or shut off breaker) before starting any repair
• Handle attached wiring and connectors carefully; connectors may be clipped into the console
• Basic hand tools are typically required; keep fasteners and trim pieces for reassembly
• Test electrical components before returning the part

This control panel replaces a cracked, worn, or unresponsive console so your appliance can reliably accept cycle and option selections again, restoring a clean appearance and smooth button action.

• Provides the interface area for selecting cycles and options
• Houses and aligns user-interface components and mounting hardware
• Protects and routes the UI connector/ribbon, when present
• Restores proper fit and finish on the front/top of the unit
• Typical symptoms: cracked or broken console, buttons binding or sticking, worn labels, or selections not registering when the touchpad is integrated into the console on your model

• Disconnect power to the appliance before servicing
• Remove screws to access the console; note hardware locations and wire/ribbon routing, and use care around sharp edges
• Handle any ribbon/IDC connectors by the stiffener; seat fully and level
• Transfer any reusable clips, brackets, or overlays/nameplates from the old panel; test keys before final reassembly

Color: Black

Color: White

Color: Black

Replacement control panel assembly that houses the appliance's user interface, buttons and display, restoring reliable control of cycle selection, options and status readouts. Use this genuine-style panel to replace a cracked, unresponsive, or faded console. What it does:

• Provides the front console with tactile buttons/touch areas and status display for selecting cycles and options.
• Sends user commands to the main control board so the appliance can start and change settings.
• Common symptoms this part addresses: unresponsive or stuck buttons, blank or unreadable display, or controls that won't change cycles or options.
• Designed as a direct-replacement console assembly (electrical connections and mounting points match OEM specifications).

• Always disconnect power (and water, if applicable) before starting repair.
• Handle the panel and its display gently to avoid damaging buttons or the overlay.
• Installation typically requires removing the console screws and unplugging the wire harness; keep track of fasteners and connector orientation.

This keypad assembly is the user-interface switch pad for a dishwasher's control panel. It registers button presses for cycles, options, and start, restoring normal input when keys are unresponsive or behave intermittently.

• Provides the control-panel keypad used to select cycles, options, and start/cancel
• Sends button signals to the electronic control board via the ribbon connector
• Failure symptoms can include: some or all buttons not responding, won't start with door latched, intermittent inputs, or random/beeping key activity
• Restores reliable button response and user control

• Disconnect power at the breaker before servicing
• Access the console/inner door area to reach the keypad; transfer and connect the ribbon cable carefully
• Ensure the ribbon connector is fully seated; avoid creasing or contaminating contacts
• Reassemble and test button functions before finalizing the repair

This control panel replaces the appliance's front console, restoring reliable button operation and a clean, readable fascia so you can select cycles and options with confidence and return the unit to normal everyday use. What it does:

• Houses the user interface buttons/keys and indicator area used to select cycles and options
• Provides the finished front fascia for the console area
• Failure symptoms can include unresponsive or intermittent buttons and settings that do not register
• Physical issues like cracks, warping, or worn/faded labels may require replacement

• One control panel assembly

• Disconnect electrical power before servicing; if applicable, also shut off water supply
• Use ESD precautions when handling any attached user interface electronics
• Transfer any brackets, bezels, or UI components from the old panel to the new panel as required
• Ensure ribbon cables and harness connectors are fully seated; test all functions before final reassembly

Color: Black

Console assembly replaces the appliance's front control panel, restoring a secure housing for the buttons and user interface so you can operate the machine reliably and protect internal electronics. What it does:

• Houses the user controls, button pads and display and provides the mounting location for the control board.
• Replaces cracked, broken or faded panels that make buttons hard to use.
• Addresses symptoms such as missing, sticky or hard-to-press buttons and visible console damage.
• Protects internal electronics from dust and impact while keeping controls accessible.

• Disconnect power to the appliance before beginning work to avoid electric shock.
• Follow the OEM service manual for disassembly and reassembly steps; console removal typically requires removing trim and fasteners.
• Handle display ribbons, connectors and the control board with care to avoid damage.

Color: Bisque

This is the adhesive label that covers your appliance's console. It restores clear, durable button and cycle markings so you can easily read and select settings while refreshing the look of the control panel.

• Adheres to the console to display cycle and option labels
• Helps protect the keypad surface from everyday wear
• Common symptoms: peeling or bubbling film, faded/illegible text, cracks, or lifting edges
• Cosmetic/labeling part that improves readability of the controls

• Disconnect power before servicing
• Remove the old overlay and clean the console surface of residue
• Carefully align with the console/keypad openings; once pressed down, it cannot be repositioned
• Apply pressure from center outward to ensure full adhesion