Dispenser Parts

The Dispenser Drawer is an OEM part for Whirlpool washing machines. It is responsible for properly dispensing the correct amount of laundry detergent at the appropriate time in the wash cycle. The detergent dispenser drawer is specifically designed to hold laundry detergent pods or liquid in its molded compartments.

Causes of a damaged detergent dispenser drawer can include corrosion or degraded plastic parts over time caused by repeated exposure to laundry detergents.

Symptoms of a malfunctioning dispenser drawer include:

• Improper dispensing or no dispensing of detergent during wash cycles
• Residue buildup or leaks from the dispenser area
• Drawer not opening or closing securely as intended
• Dispenser components broken, cracked, or non-functional

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This dispenser assembly replaces a worn or damaged refrigerator dispenser to restore reliable dispensing of water and ice. It provides the dispenser housing and interface needed for proper user operation and sealing at the door. What it does:

• Houses the dispenser components and provides the push-lever/door opening for water and ice delivery
• Restores a broken, cracked or loose dispenser opening that causes poor engagement or cosmetic damage
• Helps stop minor leaks or drips at the dispenser area when seals and gaskets are intact
• Eliminates sticking or misaligned dispenser operation that prevents normal dispensing

• Disconnect power and shut off the water supply before beginning any work.
• Installation typically requires removing the refrigerator door panel(s) and detaching the old dispenser from the inner door; keep fasteners for reuse unless replacements are provided.
• Handle plastic parts gently to avoid cracking; inspect door seals and gaskets and replace if worn.
• After installation, restore power and water, then test dispenser operation and check for leaks.

Fix exposed fasteners or openings on your washer dispenser with this protective cover cap. Keeps dirt and moisture out while restoring a clean finish.

This replacement cup funnels water to the ice maker fill tube and helps ensure proper water delivery for consistent ice production. It restores the fill path and prevents water from pooling where it can cause poor ice formation or leaks. What it does

• Directs water into the ice maker fill tube so molds receive the correct amount
• Helps prevent water from spilling into the ice bin or cabinet area
• Addresses symptoms like slow/weak ice production, water pooling under the ice maker, or visible leaks during a fill cycle
• Works with the ice maker assembly to maintain consistent ice size and formation

• One replacement ice-maker fill cup

• Disconnect power and shut off the water supply before servicing the ice maker
• Remove the ice maker or access panel per your model's service instructions to reach and replace the cup
• Handle plastic parts gently to avoid cracking; ensure a snug fit to prevent leaks
• If symptoms persist after replacement, check the fill valve and ice maker assembly for proper operation

The Dispenser Drawer is an OEM part for Whirlpool washers. It is responsible for dispensing detergent, fabric softener, and bleach during the wash cycle, ensuring even distribution and cleaning of your laundry.

A bad dispenser drawer can occur due to regular use, buildup of residue or clogs, or damage caused by mishandling. If you notice issues such as the dispenser drawer not opening or closing properly, leaks or drips from the dispenser area, or detergent not being dispensed correctly, it may indicate a problem with the dispenser drawer.

Symptoms of a bad dispenser drawer include:

• Improper dispensing of detergent
• Leaks or drips from the dispenser area
• Difficulty in opening or closing the drawer

Replace your faulty dispenser drawer with this genuine OEM Whirlpool part to your washer.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This dispenser handle assembly restores proper operation and control of your refrigerator's ice and water dispenser. It replaces a cracked, loose, or broken handle so you can dispense without difficulty and improve the dispenser's appearance. What it does

• Replaces damaged or cracked dispenser handle so the lever engages properly
• Provides a secure grip for activating the ice and water dispenser
• Helps stop wobbling or sticking that prevents consistent dispensing
• Restores alignment and tactile feedback for dispenser operation

• Disconnect power to the refrigerator before starting any work to avoid electrical hazard.
• Remove the old handle by accessing the dispenser trim and fasteners; retain mounting screws if reusing.
• Align the new handle, secure fasteners, and verify the dispenser lever moves freely and dispenses correctly.

This water tank assembly holds and delivers chilled water to the dispenser and ice system, restoring proper water flow and preventing dispenser dry-running. Direct-fit replacement designed to match the original reservoir's form and function. What it does

• Stores and supplies water for the refrigerator dispenser and ice-making components.
• Replaces cracked or damaged reservoirs that cause leaks or loss of water supply.
• Helps resolve intermittent or no-water dispense when the tank is compromised.
• Works with the refrigerator's fill and drain pathways to maintain correct water levels.

• One water tank assembly

• Disconnect power and shut off the water supply before servicing.
• Drain remaining water from the lines and tank to avoid spills during removal.
• Handle the tank carefully to avoid damaging fittings or mounting tabs.
• After installation, restore water and power, then check connections and test for leaks and proper dispense/ice fill.

Fix detergent not dispensing or leaking from the drawer. This washer dispenser assembly replaces cracked or clogged units. Direct-fit installation.

Fix softener or bleach not dispensing properly with this dispenser funnel. Channels liquids from drawer into tub to restore correct flow. Easy install.

Fix detergent not dispensing or drawer stuck issues with this washer dispenser. Simple DIY fix for soap buildup and dispensing problems.

Fix loose or missing dispenser trim with this washer cover cap. Snaps into place to protect fastener openings and restore a clean, finished look. Easy DIY fix.

Washer won't start or spin? A faulty door latch prevents operation by not securing the door. This safety part locks during cycles to avoid leaks.

Fix detergent not dispensing properly with this washer detergent dispenser cup. Solves leaking or broken dispenser issues. Simple install in 15 minutes.

The Dispenser Tray is an OEM part for Whirlpool top-loading washing machines. Located inside the detergent drawer, this durable molded tray is designed to hold liquid detergent packs safely in place during cycles. Its size and dimensions facilitate convenient single-dose placement.

Causes for replacement may include cracks, warping, or discoloration due to mineral buildup affecting the tray structure over time.

Symptoms of a faulty tray involve:  

• Difficulty loading or securing detergent packs properly   
• Leaks or spills of detergent inside the drawer compartment
• Off-center or displaced detergent dosing during the wash

This OEM Whirlpool replacement is compatible with select Whirlpool, Maytag, and other major brand front-loaders.

Detergent not dispensing or leaking from drawer? This washer dispenser drawer holds and releases detergent at the right time during wash cycles.

Detergent or softener not dispensing properly? This dispenser drawer assembly deposits detergent at the right time. Straightforward replacement.