Door

This door mullion forms the pivoting center rail between the refrigerator's French doors. It flips closed to complete the door seal, helping prevent air leaks, condensation, and temperature swings in the fresh food section.

• Provides the center rail that bridges the gap when the doors close and flips open with either door
• Helps maintain a proper door seal to reduce warm air infiltration and moisture buildup
• Common signs of failure: broken or loose flap, won't flip or stay engaged, doors not closing evenly, condensation or frost near the center seal
• Restores smooth operation of the door stop and sealing surfaces

• Disconnect power before servicing
• Clear door bins and support the door to prevent strain while working
• Remove mounting screws/covers; note spring orientation and any clips on the old mullion
• Transfer hardware if needed, align and secure the new mullion, and verify it flips and seals smoothly

Color: Black

This replacement inner door panel restores the interior surface of the door. It supports door bins/shelves and provides a stable surface for the door gasket to seal, helping keep cold air in and items secure.

• Forms the interior face of the door and supports door bins/shelves
• Provides the gasket with a flat surface to help maintain a proper seal
• Replace if cracked, warped, or separating from the door frame
• Common symptoms include loose/falling door bins, visible damage, or air leaks/frost near the door

• Disconnect power and empty items from the door before service
• Remove the door per the appliance manual and lay it flat to prevent twisting
• Transfer the door gasket and any reusable hardware from the old panel if applicable
• Install the new panel and tighten fasteners evenly; verify the gasket seals all around

The Freezer door assembly is essential for maintaining the efficiency of your bottom-mount refrigerator. This genuine OEM part ensures a snug and reliable seal, preventing cold air from escaping and keeping your freezer at the optimal temperature. By effectively insulating the door, it helps reduce energy consumption, which can lead to lower utility bills and a more eco-friendly household. The durable design of the seal assembly withstands daily use, ensuring long-lasting performance and protecting your food from freezer burn. Compatible with a variety of Samsung bottom-mount refrigerator models, this door seal assembly is straightforward to install, allowing you to restore your applianceGÇÖs functionality with ease. Whether replacing a cracked, worn, or damaged seal, the Refrigerator Freezer Door Seal Assembly provides a dependable solution to keep your refrigerator running smoothly and your items fresh.

Includes door assembly and internal latch parts.

This door mullion is the vertical flipper rail that mounts to a refrigerator French door. It swings closed to cover the center gap, helping complete the door seal and reduce warm air leaks and condensation between the doors.

• Provides the pivoting center rail that mates with the opposite door to complete the seal
• Replace if cracked, broken, warped, or if the flipper won't fold or spring closed
• Common symptoms: door won't close smoothly, visible gap/light between doors, moisture or frost along the center seam
• Helps restore a proper air seal for consistent cooling performance

• Disconnect power and clear door bins before servicing
• Open the door; release the upper and lower retainers and lift the old mullion off its hinge points
• Position the new mullion, secure the retainers, and verify it pivots and seals correctly
• Check door alignment and gasket contact along the center seam

A vertical mullion assembly that restores the finished trim along the refrigerator door edge and covers the gap between doors for a clean appearance. Replaces cracked, broken, or loose mullion trim to improve fit and finish. What it does:

• Covers the vertical gap between refrigerator doors and provides a finished interior edge
• Hides and protects any wiring or fasteners routed along the door edge
• Restores proper door trim when the original mullion is cracked, split, or loose
• Helps reduce visible moisture or frost build-up along the door seam caused by damaged trim

• Disconnect power to the appliance before starting any repair to avoid injury
• Typically installs with a few fasteners or snaps into place; keep mounting screws from the original part if reusing
• Handle trim pieces carefully to avoid cracking; use non-marring tools to pry if needed

This small permanent magnet is used in supported refrigerator assemblies to actuate a mating reed switch or metal keeper. It helps the appliance recognize a closed position or hold a light cover/door closed for proper operation. What it does:

• Works with a reed switch or ferrous keeper to provide position sensing or magnetic latching
• Helps ensure features dependent on closed position operate correctly
• Can resolve issues where a small cover or door won't stay closed
• Address erratic "door ajar" indications tied to magnetic sensing

• Disconnect power and water before servicing
• Note the original magnet's location and orientation; polarity matters for proper operation
• Seat the magnet fully in its pocket or holder and align with the mating switch/keeper
• Test the related function before reassembling panels and trim

This piece replaces the flip-up cover for the cheese/butter compartment on your refrigerator door. It restores a tidy, enclosed spot for butter and small dairy items, helping keep contents contained and easy to access.

• Covers the dairy bin on the fresh food door; flips up for quick access
• Helps contain and protect butter/cheese items to reduce spills and mess
• Replace when cracked, warped, missing, or no longer stays attached/closed
• Designed to fit the designated hinge points for the dairy compartment on applicable models

• Disconnect power before servicing
• Allow plastic parts to warm to room temperature to reduce risk of cracking
• Align door tabs with the hinge posts on the compartment and press until fully seated
• Open and close the door to ensure smooth operation

The Ice Door is an OEM component specifically designed for Whirlpool side-by-side refrigerators. Located at the top freezer compartment, it provides access to interior ice and water dispensing functions.  

Causes of a faulty ice door can include damage due to impact or warping from temperature fluctuations. Friction between the door seal and frame may prevent smooth opening and closing over time as well.

Symptoms of a bad ice door include:

• Difficulty opening or closing the door fully  
• Ice dispenser malfunctions or leakage occurs
• Seals no longer form an adequate barrier  
• Warping causes misalignments or binding

This OEM Whirlpool replacement ice door restores reliable access and sealing. Installed promptly to resolve any issues, it prevents further performance deterioration.  

Compatible also with some GE and Kenmore side-by-sides, this part maintains convenient dispensing functions. Protect your refrigerator investment with an OEM ice door replacement when needed.

This mullion rail is the trim piece that secures and finishes the gap between refrigerator doors, improving seal alignment and giving the cabinet a clean, finished look. It restores proper door fit and appearance. What it does:

• Holds the mullion/trim in place along the door opening for a consistent seal and appearance
• Helps keep door gaskets aligned to reduce drafts and improve cooling consistency
• Prevents the trim from flexing or separating when doors are opened and closed
• Addresses visible trim damage, loose or missing mullion pieces, and uneven door gaps

• One mullion rail trim piece

• Disconnect power to the appliance before starting work to avoid injury
• Remove any door liners or screws that cover the mullion before replacing the rail
• Handle trim and clips carefully to avoid cracking; small retaining clips or screws may be reused if undamaged

This replacement lid fits the refrigerator utility/bin drawer and restores a secure cover to keep stored items contained and organized. It replaces cracked, broken or warped lids so the bin functions as intended. What it does:

• Covers and protects items stored in the utility/bin drawer
• Replaces lids that are cracked, chipped or no longer latch properly
• Helps prevent items from shifting or falling into other compartments
• Restores a proper seal and alignment of the utility/bin cover

• Unplug or disconnect power to the appliance before servicing for safety
• Remove the bin/drawer per the manufacturer instructions to access the lid
• Align hinge tabs or mounting points and snap or fasten the lid into place
• Handle carefully; plastic edges or mounting points can be fragile during installation

The Dairy door Assembly is an OEM part for Frigidaire refrigerators. It is designed to securely hold and organize products on the door, keeping them easily accessible and fresh.

A bad bin assembly can be caused by wear and tear, damage, or improper handling. When the assembly becomes faulty, it can result in issues such as a loose or broken door bin, difficulty in opening or closing the bin, or inadequate temperature control for items.

Symptoms of a bad bin assembly include:

• Unstable or wobbly storage for dairy products
• Difficulty in accessing or retrieving items from the bin
• Spoiled items due to temperature fluctuations

This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This center mullion kit replaces the vertical trim piece between refrigerator doors to restore a finished appearance and help maintain the door seal. It fits the factory location and matches the original trim profile. What it does:

• Replaces cracked, warped or cosmetically damaged center trim
• Restores the gap cover between doors for a clean, finished look
• Helps maintain proper door alignment and reduces drafts at the door joint
• Matches original mounting points for a direct-fit replacement

• One center mullion kit

• Always unplug the appliance or switch off power at the breaker before beginning any repair
• Remove doors or inner liners only if required by your model's service instructions; follow manufacturer guidance
• Use basic hand tools to remove fasteners and align the replacement trim; avoid over-tightening screws

Color: White

This kit is required when replacing the freezer door. For the freezer door order by model number.