Frigidaire Control Board

This ignition generator and wiring harness assembly routes power and provides the spark/ignition signal needed for gas appliance burners to light. It replaces a worn or damaged ignition assembly to restore reliable lighting. What it does:

• Sends ignition voltage to the burner igniters and electrodes so burners light reliably
• Routes and secures wiring between the control module and ignition components
• Common failure symptoms: burners won't light, continuous clicking, or intermittent ignition
• Works as the electrical interface between the control and the igniters for safe startup

• One generator and wiring harness assembly

• Disconnect electrical power and turn off the gas supply before starting work
• Follow the appliance OEM diagram for correct routing and connector locations
• Inspect connectors and electrodes for damage and replace if corroded or worn

Fix a washer that won't advance through cycles or keeps running continuously. This timer replacement restores proper cycle control. DIY-friendly repair.

Fix a washer that won't start, shows error codes, or stops mid-cycle. This main control board restores cycle operation and digital controls in about 1 hour.

Fix a dishwasher that won't start cycles, shuts down mid-cycle, or shows error codes. This control board manages all functions and cycle timing.

Fix a washer dryer combo that won't advance cycles or stops mid-program with a new control timer. Moderate difficulty repair restores proper cycle timing.

Fix a blank or non-functioning oven clock display with this range clock timer. Restores timekeeping and timed bake cycles. Moderate DIY repair.

This generator is the OEM replacement rotary cam assembly that times and drives mechanical sequences so your appliance operates correctly. It restores proper cycle sequencing to help eliminate failures caused by a worn or damaged cam. What it does:

• Rotates and indexes internal cams/gears to control mechanical switching and timing
• Ensures correct sequencing of cycles and component engagement
• Commonly replaces noisy, stuck, or non-indexing cam assemblies
• Helps resolve symptoms like intermittent operation, failed cycle changes, or mechanical binding

• One generator (rotary cam assembly) as shown

• Disconnect power before servicing to avoid shock or injury
• Access may require panel removal and basic hand tools
• Verify alignment and timing marks during installation for proper operation

This board-switch is the user control/selector module that sends settings signals to an appliance's control system, restoring reliable selection of cook or cycle options and user-input functions. What it does

• Acts as the selector/control interface that registers knob or button selections and sends corresponding signals to the main control
• Re-establishes lost or intermittent selection responses when worn contacts or a failed switch board prevent input recognition
• Can fix symptoms such as unresponsive selector buttons/knobs, inability to change cycles or modes, or intermittent control inputs
• Works as the electrical switching/selector component rather than a full electronic control board

• One board-switch assembly as shown

• High-level replacement: power must be disconnected at the breaker or plug before access and replacement
• Handle the board by edges; avoid contact with components and use anti-static precautions if possible
• Installation may require removal of the control console or panel and basic hand tools; keep screws and connectors organized

This electronic control board manages oven functions and the user interface so the range can run timed cycles and temperature commands reliably. Replacing a faulty board restores control and display operation for affected bake/oven features. What it does:

• Receives input from the console and sends commands to heating elements, igniters, and timers
• Controls oven temperature regulation and cycle timing based on user settings
• Can cause symptoms like a blank or unresponsive display, no heating, incorrect oven cycles, or error codes when failing
• Works as the central logic module for oven/range electronic control

• One electronic control board

• Always disconnect power at the breaker or unplug the appliance before service
• Handle the board carefully to avoid static damage; use anti-static precautions if available
• Verify wiring connections and mounting are secure; replace only with the exact part number
• Test function after installation; for any required control calibrations

Fix a microwave with a non-working display, unresponsive buttons, or vent fan stuck on high. This control board restores keypad and timer functionality.

Fix a range clock that won't keep time or display correctly with this control board clock repair kit. Common solution for electronic timer failures.

This user interface control board replaces the oven's front control module so you can send commands and view settings. It restores responsive touch/buttons and proper display feedback for normal operation. What it does

• Receives button/touch inputs and relays commands to the oven control system
• Provides display/status feedback so settings and timers are visible
• Helps resolve unresponsive buttons, blank or incorrect display readouts, or intermittent control behavior
• Works as the main input surface for oven functions like bake, broil, timers, and temperature settings

• One user interface control board (UI board) — only items explicitly listed by the manufacturer are included

• Turn power to the appliance off at the breaker before servicing to avoid electrical shock
• Handle the board and connectors carefully; avoid touching contacts or flexing the board
• Verify connector orientation and secure mounting; test operation with power restored

Oven display not working or timer unresponsive? This electronic clock timer restores timing functions and digital display. Moderate DIY repair.

Fix an oven that won't heat, has a blank display, or shows error codes with this electronic control board. Restores proper temperature control and functions.