Handle

The Door handle assembly is an OEM part for Whirlpool ranges. It is a component that includes both the door handle for convenient access, as well as the vent responsible for safely removing heat, smoke, and odors from the oven cavity.

Causes of a bad door handle and vent assembly can include wear from continuous use, heat exposure warping plastic components, or damage from impacts over time. Grease and food debris buildup can also deteriorate vent fan motors and air channels.

Symptoms of a bad assembly include:

• Difficulty opening or closing the oven door
• Excessive smoke or burned food smells
• The vent fan not operating or exhausting properly
• Internal components like springs or bearings becoming loose

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement screw fastens appliance panels and components securely. Replace a missing, stripped, or corroded original to restore a tight fit and help prevent rattling, vibration, and gradual loosening of assemblies.

• Secures panels, brackets, and internal assemblies to the frame
• Replaces damaged or missing hardware to maintain proper fit
• Helps reduce vibration, noise, and movement caused by loose parts
• Supports correct alignment at the original mounting points

• Disconnect power and shut off water or gas before service.
• Match the original screw's location and length; replace one at a time if needed.
• Use the correct driver/bit and avoid overtightening to prevent stripping plastic or metal.
• Reuse any washers or clips only if in good condition.

The Handle Door WW is an OEM part for GE refrigerators. It is the outer door handle component that is grasped to open and close the refrigerator door. 

The proper function of the handle is important to allow convenient access to food storage. Causes of a bad handle can include wear and tear over time, as well as damage from excessive force or impacts. 

Symptoms of a bad refrigerator door handle include:

• Difficulty grasping or turning the handle firmly  
• Looseness, wobbling or falling off from the door surface
• The handle not engaging properly to open the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Color: Stainless

The Door Handle is an OEM part for Whirlpool refrigerators. It is a component that facilitates easy access to the fresh food and freezer compartments. The handle interfaces directly with users to open and close refrigerator doors.

Causes of a bad door handle can include wear and tear over time from repeated use, or damage such as cracks, chips or breaks from accidental impact. Temperature fluctuations from frequent door openings can also cause handles to warp or fail prematurely.

Symptoms of a bad refrigerator door handle include:

• Difficulty opening or closing the refrigerator door
• The door not latching securely
• Internal components like springs or cables becoming loose or worn

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Refrigerator Handle is an OEM part for Frigidaire side-by-side refrigerators. It provides a grip point to easily open and access fridge and freezer compartments. The handle must withstand constant use without breaking or losing functionality. 

Symptoms of a bad refrigerator handle include:

• Difficulty opening the refrigerator door  
• Loose, jagged, or unstable handle grip that poses a safety risk
• Cracks, chips or damaged plastic compromising structural integrity

Causes can be wear over years of heavy usage, exposure to heat or cleaning chemicals accelerating degradation, or physical impact resulting in breaks.

This OEM Frigidaire replacement handle is also compatible with some Electrolux, Crosley, and Amana refrigerator models.

The Freezer Door Handle is an OEM part for Frigidaire refrigerators. It is responsible for facilitating easy access and opening of the freezer door. The handle is designed for comfort and a secure grip, allowing smooth operation of the door with minimal effort. 

Causes of a bad door handle can include normal wear and tear over time from frequent use, accidental damage from impact or mishandling, or components wearing down due to stress.  

Symptoms of a bad door handle include:

• Difficulty opening or closing the freezer door  
• The handle being loose, wobbly, or improperly secured
• Breakage or cracking of handle components
• Inability to open/close door without two hands

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Handle is an OEM part for Whirlpool refrigerators. An external component consumers interact with daily, the handle provides access to chilled storage compartments.

Symptoms of a bad handle include:

• Difficulty opening refrigerator doors smoothly
• Loose or detached handle assembly  
• Inability to open refrigerator fully for easy access
• Failure of locking/closing mechanisms

Causes may include normal wear over extended use. Plastic components can weaken from repeated opening/closing of heavily weighted doors.

This quality OEM Whirlpool replacement handle ensures dependable operation for the life of your refrigerator. Sturdy construction and precise fitment guarantee seamless access to food and beverages. This part is also compatible with Maytag, Roper, Amana, Jenn-Air, and select Kenmore models.
 

This replacement refrigerator door handle restores safe, secure grip and normal door access after a worn or broken handle. It matches OEM fit and finish to keep the door looking and functioning like new. What it does:

• Provides a secure handhold to open and close the refrigerator door
• Replaces cracked, loose, or missing handles that affect door operation or appearance
• Maintains proper clearance and alignment for normal door movement
• Helps prevent injury from sharp or broken handle edges

• Use the appliance power and water disconnect procedure recommended by the manufacturer before beginning work
• Remove trim or screws as needed to access handle fasteners; keep fasteners for reassembly unless new hardware is explicitly included
• Tighten screws evenly to avoid misalignment or cosmetic damage
• If door or trim is bent or damaged, inspect assemblies before installing the new handle

The Door Handle is an OEM part for Whirlpool refrigerators. This sturdy handle serves as a convenient way to open and close the doors of your appliance. The door handle offers a comfortable grip and provides an easy way to access your refrigerator and freezer compartments. 

A bad door handle can occur due to excessive force, accidental impacts, or simply regular use over time. If you notice symptoms such as a loose or wobbly handle, difficulty in opening or closing the doors, or visible cracks or damage, it may be time to replace this part.

Symptoms of a bad door handle include:

• Loose or wobbly handle
• Difficulty in opening or closing the doors
• Visible cracks or damage

Restore your Whirlpool refrigerator by replacing the worn or damaged door handle with this genuine OEM part.

This OEM part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Color: White

This extruded refrigerator door handle provides a durable, easy-grip replacement that restores a secure, finished pull on compatible GE refrigerators. Ideal when the existing handle is cracked, loose, or cosmetically worn. What it does:

• Replaces a damaged or broken refrigerator door handle to restore safe opening and closing
• Provides a full-length, extruded grip for comfortable handling
• Matches original mounting points for a direct-fit swap on compatible doors
• Improves appearance by replacing a scratched, faded, or cracked handle

• Typically installs with screws or clips at the door; refer to your model's service manual for exact fasteners
• Power/appliance disconnect not required for handle replacement, but remove contents and support the door to prevent slippage
• Handle surface may have protective film—remove before use

This replacement part is an operator bail. It is intended for use with push lawn mowers and assists the user in ensuring the machine is being maneuvered properly.A new operator bail might be needed if the current one is no longer working. If the bail itself has been dented, bent, or broken, it might be a good idea to replace this part.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement broil handle restores a clean, functional grip for opening the broiler/oven compartment. Designed to match the original fit and finish, it helps make access to the broiler easier and keeps your range looking complete. What it does:

• Replaces a cracked, faded, or broken broil/oven handle for safe, reliable opening and closing
• Provides a secure grip so the broiler door can be opened without damage to the appliance or user
• Restores the appliance's finished appearance when the original handle is discolored or worn
• Fits the manufacturer's original mounting points for a proper, stable attachment

• Disconnect power to the appliance before beginning any service to avoid injury
• Retain and reuse original mounting screws and brackets unless replacement hardware is specified
• Installation typically requires basic hand tools; handle fastens to the door at the original mounting points

The Dispenser Drawer Handle is an OEM part specifically designed for Whirlpool washing machines. It controls detergent dispensing for optimized cycles.

Symptoms of a faulty drawer handle include: 

• Inability to open the dispenser drawer for addition of detergent  
• The handle mechanism sticking or failing to engage the latch
• Premature wear frustrating normal operation 

Over many years of opening and closing, physical stresses can deform or compromise handle workings. Small cracks reduce latched security.

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

This part is the door handle made for a refrigerator unit. The purpose of this handle is to provide a solid component that the user can pull to open the refrigerator door. Over time and with repeated use, this component may begin to show signs of wear and tear. The door handle can be replaced for cosmetic purposes. The door handle is simply held on with screws and is very easy to replace. A screwdriver will be needed to perform the replacement process for this refrigerator door handle. The person performing the replacement may wish to wear work gloves to protect the hande during this process.This particular white door handle is compatible with refrigerators that are manufactured by General Electric. It is sold individually. This high-quality and durable part is sourced directly from the manufacturer.