Lg Parts

This duct assembly channels airflow inside the appliance to guide exhaust and internal air between components. Replacing a damaged or obstructed duct helps restore proper airflow and can reduce poor performance or long cycles. What it does:

• Directs exhaust and circulation air between internal components to maintain airflow
• Prevents leaks that can reduce efficiency or cause longer cycle times
• Helps avoid overheating or moisture build-up from restricted airflow
• Reduces rattling or vibration caused by a cracked or loose duct

• Disconnect power (and turn off gas supply for gas appliances) before beginning work.
• Handle edges carefully — sheet metal can be sharp; wear cut-resistant gloves.
• Ensure duct is seated and fastened to create a tight seal where it connects to other components.
• After reassembly, run a test cycle to confirm airflow and proper operation.

The Blower Motor Assembly is an OEM replacement part for LG dishwashers. Located inside the wash cavity, it functions to distribute heated air throughout during the dry cycle. Rapid rotation of the blower motor blades works to eject moisture from dishes and ensure thorough drying. 

Causes of a bad blower motor include failure of the motor itself, cracks in the blades that disrupt airflow, or bearing issues preventing proper rotation.

Symptoms include:

• Dishes still feeling damp after a cycle 
• Puddles of water remaining in the bottom of the dishwasher
• Water droplets on upper racks/dishes
• The motor producing grinding/squealing noises on startup

It is also compatible with some Kenmore dishwashers using LG components. 

The Water Filter LT800P is an OEM part for LG refrigerators. This filter is designed to remove contaminants from the water supply, ensuring clean and fresh-tasting water and ice.

Causes of a bad water filter can include extended use beyond its recommended lifespan, exposure to high levels of contaminants, or damage to the filter itself.

Symptoms of a bad Water Filter LT800P include:

• Unpleasant taste or odor in the water or ice
• Reduced water flow from the dispenser
• Indicator light signaling the need for replacement
• Visible sediment or particles in the water

This OEM LG part is also compatible with Sears/Kenmore.

The Main PCB Assembly is an OEM replacement part for LG refrigerators. As the primary control board, it manages all refrigerator functions and features such as temperature control, frost free operation, and diagnostic fault codes.

Causes of a faulty PCB can involve spilled liquids corroding circuit pathways over time, defects in integrated computer chips, or loose connections susceptible to arcing under continuous power loads.

Symptoms include:

• Non-responsive control panels and displays
• The refrigerator failing to cool or maintain proper temps
• Abnormal sounds from the compressor and fans not engaging

Also compatible with some Kenmore models

The Freezer Temperature Sensor is an OEM part for LG refrigerators. This sensor monitors the temperature within the freezer compartment, sending readings to the refrigerator’s control board to maintain optimal temperature levels. It plays a crucial role in ensuring that the freezer operates efficiently and keeps food items properly frozen.

Over time, the temperature sensor can fail due to regular wear and tear, electrical issues, or exposure to extreme temperatures. A faulty sensor can lead to inaccurate temperature readings, affecting the freezer's performance.

Symptoms of a bad freezer temperature sensor include:

• Inconsistent freezer temperatures
• The freezer running continuously or not running at all
• Frost buildup in the freezer compartment
• The control board displaying error codes related to temperature

This OEM LG part is also compatible with Sears/Kenmore.

The Door Switch is an OEM part for LG refrigerators. It is located near the door hinge and is activated by the door's movement. When the door is closed, the switch is engaged, allowing the interior light to turn off and other functions to operate normally. When the door is opened, the switch is released, triggering the interior light to turn on and potentially activating other features, such as the ice dispenser or cooling system.

Causes of a faulty door switch can include wear and tear over time, mechanical damage from excessive force, or electrical issues.

Symptoms of a bad door switch may include:

• The interior light not turning on when the door is opened
• The interior light remains on when the door is closed
• Issues with the dispenser or other functions associated with the door switch

The Dispenser Lever Retainer is an OEM part for LG refrigerators. This part secures the dispenser lever in place, this part ensures the smooth operation of the water and ice dispenser. 

Causes of a bad Dispenser Lever Retainer can include normal wear and tear from repeated use, accidental damage, or deterioration of the material over time.  

Symptoms of a bad Dispenser Lever Retainer include:

• The dispenser lever is loose or wobbly
• Difficulty in dispensing water or ice
• The lever does not return to its original position after use
• Unintended activation or difficulty in activating the dispenser

This OEM LG part is also compatible with some Kenmore models.

The Water Inlet Valve is an OEM part for LG dishwashers. This part regulates the flow of water into the dishwasher tub during the fill cycle, ensuring the proper water level for effective cleaning.

Causes of a bad part can include sediment or mineral buildup obstructing the valve, physical damage from water pressure or impact, or electrical malfunctions preventing the valve from opening and closing correctly.

Symptoms of a bad Water Inlet Valve include:

• Failure of the dishwasher to fill with water
• Overfilling or insufficient water levels in the tub
• Leaks from the valve or water inlet area
• Error codes or indicator lights related to water supply issues

This OEM LG part is also compatible with some Kenmore models.

The Motor Wiring Harness is an OEM replacement part for LG washing machines. It is responsible for supplying power from the washer control board to the motor and related components. The wiring harness conducts electrical current, allowing for the operation of the pump, motor, and other vital systems. 

Causes of a bad motor wiring harness can include damage due to repetitive use and wear over long periods of time, exposure to moisture, impact or abrasion damage, or faulty insulation leading to electrical shorts.

Symptoms of a bad motor wiring harness include: 

• The washer failing to start or functioning intermittently
• Strange noises coming from the motor or other electrical components
• Slow or ineffective spinning or agitation  
• Error codes displayed on the control panel

This OEM LG part is also compatible with Sears/Kenmore washing machines. 

This genuine replacement gasket restores a tight, reliable seal between mating parts in your appliance to prevent leaks and performance loss. Replacing a worn or damaged gasket helps stop moisture intrusion and keeps the unit operating as designed.

• Forms a compressible barrier to keep air or water from escaping at the joint
• Helps maintain proper operation and efficiency by preserving the intended seal
• Common failure signs: leaks or drips, visible cracks/tears or flattening, hardening/brittleness, or gaps that won't stay closed

• Disconnect power and, if applicable, shut off the water supply before service
• Clean and dry all sealing surfaces; remove old residue or adhesive
• Seat the gasket evenly without stretching; press for full contact all around
• Let the gasket relax at room temperature (or warm slightly) to ease fit, then check the seal after reassembly

The Blower Wheel is an OEM part for LG dryers. This part circulates air through the dryer drum and out the exhaust vent, ensuring proper airflow for efficient drying of clothes.

Causes of a bad blower wheel can include accumulation of lint and debris, wear and tear over time, or physical damage due to foreign objects entering the blower housing.  

Symptoms of a bad blower wheel include:

• Reduced or no airflow from the exhaust vent
• Unusual noises such as rattling or squealing during the drying cycle
• Clothes taking longer to dry or remaining damp
• Overheating or frequent shutdowns of the dryer

This OEM LG part is also compatible with some Kenmore models.

The Freezer Door Handle is an OEM part for LG refrigerators. It provides a convenient grip for opening and closing the freezer door, ensuring easy and efficient access to the freezer compartment.

Over time, freezer door handles can become loose, damaged, or break due to frequent use, accidental impacts, or general wear and tear. These issues can make it difficult to open or close the freezer door properly.

Symptoms of a bad freezer door handle include:

• Loose or wobbly handle
• Visible cracks or breaks in the handle
• Difficulty in opening or closing the freezer door
• Handle detaching from the door

This OEM LG part is also compatible with Sears/Kenmore models.

The Suspension Assembly is an OEM part for LG washing machines. This part ensures the stability of the washer during operation by absorbing vibrations and reducing movement. The suspension assembly maintains the balance of the wash drum during the spin cycle, preventing excessive shaking or noise.

Causes of a bad Suspension Assembly can stem from normal wear and tear over time, overloading the machine beyond its capacity, or consistently washing unbalanced loads, which put additional stress on the suspension components.

Symptoms of a bad Suspension Assembly include:

• Unusual noise during the spin cycle
• Excessive vibration or shaking of the machine
• The washing machine "walking" or moving from its designated spot
• Uneven distribution of laundry leading to imbalanced loads

This OEM LG part is also compatible with Sears/Kenmore.

The Water Nozzle is an OEM replacement part for LG refrigerators. It is a component within the refrigerator's ice maker and water dispenser system. The water nozzle controls the flow of water into the ice making mold or water dispenser functions.

Symptoms of a bad water nozzle include:

• Slow filling or inability to fill the ice-making mold 
• Inconsistent or weak water dispensing from the refrigerator's door 
• Leaks or water drips around the ice maker or water dispenser area

Causes of a faulty water nozzle can be mineral deposits accumulating over time, wear and tear from heavy use, or damage due to impact or freezes. 

This part is also compatible with many Kenmore side-by-side refrigerator models.

The Door Latch Hook is an OEM replacement part for LG front load washers. It is a component of the overall latch and locking assembly and works to securely close and lock the washer door. With a properly functioning latch hook, the washer door remains tightly sealed during cycles to ensure optimal water retention and the most thorough cleaning. 

Symptoms of a bad door latch hook include:

• Water leaks around the door during washing cycles
• The door fails to latch fully and unlock after cycles 
• Difficulty opening or closing the washer door completely
• Alignment issues like misaligned or skewed door positions

Causes of a bad door latch hook can include wear over extended use. Damage may also result from washing hard or abrasive items that put excess strain on the latch mechanism over time.

This OEM LG part is compatible with Sears/Kenmore front-load washer models as well. 

The Door Boot Seal is an OEM replacement part for LG washing machines. It establishes an air-tight barrier around the perimeter of the washer door when closed, preventing water leaks.

Causes for failure typically include cracks or splits that develop over repeated use and exposure to moisture. Washing machine doors endure constant temperature changes that accelerate material degradation.

Symptoms of a bad door boot seal include:

• Puddles or drips of water near the base of the washer
• Moisture stains marking surrounding cabinetry
• Incomplete sealing allowing water splash-out
• Visible gaps compromising full containment during agitation

This is a door boot seal WITHOUT a drain port. For a door boot seal WITH a drain port, use 4986ER0004G.