Touch Pad

This replacement overlay is the decorative and functional cover for the appliance control panel, restoring button labels and the finished appearance so controls are readable and protected from spills. What it does:

• Replaces worn or faded control-panel graphics so button labels and icons are visible
• Protects the underlying membrane switches and electronics from spills and surface wear
• Helps restore a clean, factory appearance to the console
• Resolves issues where worn legends cause confusion about button function

• One control-panel overlay as shown

• Designed to fit over the console; remove power before beginning work
• Handle carefully to avoid bending or creasing the overlay during installation
• Use common hand tools; follow OEM disassembly order to access the console
• If adhesive is present, clean the surface of old residue before applying the new overlay

Replacement membrane keypad that restores the oven/range control interface so you can enter temperatures, cook modes and timers with responsive button feedback. Ideal when keys are worn, unresponsive, or hard to read. What it does:

• Sends user button presses to the appliance's electronic control so you can select bake/broil modes, timers, and temperature settings.
• Use when buttons are unresponsive, intermittent, sticky, or not registering inputs.
• Helps when key labels are faded or damaged and make controls difficult to read.
• Does not replace the main control board; it provides the user interface that communicates with the control.

• Disconnect power to the appliance before beginning any repair.
• Access may require removing the console trim or control panel; keep track of screws and clips.
• Carefully disconnect and reconnect the keypad ribbon cable to avoid bending or damaging the contacts.
• Test the electronic control board and connectors for faults.

This replacement keypad provides the push-button controls for the oven/range control panel so you can restore responsive temperature, timer and function input. It gives a direct, like-for-like way to fix unresponsive or damaged front-panel buttons. What it does:

• Replaces the front-panel push-button keypad used to select bake, broil, timers and other oven functions
• Restores button responsiveness when keys are sticky, worn, or no longer register presses
• Helps resolve control-panel input issues and some user-interface error symptoms
• Works with the existing control board and ribbon/cable connection to send user commands

• One keypad assembly

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Installation typically requires removing the oven/range control panel trim; keep screws and fasteners organized
• Handle the flat ribbon/cable and connector gently; ensure proper seating when reinstalling
• Test keypad operation before fully reassembling the trim and outer panels

This bisque clock overlay restores the finished look of the range control panel and provides a clean face for the clock and control indicators. It replaces a cracked, faded, or missing overlay to improve appearance and readability. What it does:

• Covers and protects the clock/display area on the control panel
• Restores printed markings and a uniform finish for easier time reading
• Helps prevent dirt and debris from collecting on the clock face
• Useful when the existing overlay is cracked, discolored, or peeling

• One bisque clock overlay

• Disconnect power to the appliance before beginning any work
• Removal may require accessing or removing the control panel; follow model-specific service instructions
• Handle carefully to avoid scratching or bending the overlay during installation
• Use only manufacturer-recommended fasteners or adhesive as applicable for your model

This panel assembly is the appliance control console that gives you back access to your unit's buttons and display, restoring normal control and a clean appearance. It replaces a cracked, faded, or non-functional front console. What it does:

• Provides the user interface for selecting cycles, temperatures, and settings via buttons or touchpads.
• Restores response when buttons are worn, labels are illegible, or the console is physically damaged.
• Covers and protects internal controls and the display from spills and debris.
• Can resolve issues caused by a cracked or bent panel that interferes with button operation.

• Disconnect power to the appliance before starting any repair to avoid shock.
• Handle the panel carefully to avoid damaging ribbon connectors, the display, or sharp edges.
• Align connectors and mounting tabs and secure fasteners per the service instructions for your model.

This electronic control board manages the dishwasher's settings and cycle operations, restoring responsive touch controls and reliable cycle sequencing so dishes are cleaned on the selected program. Replaces a failed or unresponsive console control module. What it does:

• Interprets user inputs and runs the dishwasher's programmed cycles.
• Controls timing, wash/dry functions, and interface feedback.
• Common symptom: touchpad or display unresponsive or erratic behavior.
• Common symptom: cycles fail to start, stop mid-cycle, or show error codes tied to control faults.

• One electronic control board (W10757829).

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the board by edges to avoid ESD damage; use anti-static precautions if available.
• Some models require removing the control panel or inner door trim to access the board.

This dispenser facade replaces the outer trim pieces around your refrigerator's ice and water dispenser, restoring appearance and proper fit for smooth operation and sealing. It's a direct-fit cosmetic and protective assembly. What it does:

• Covers and protects the dispenser opening and controls from damage and debris
• Provides a finished look and helps direct water/ice into the cup
• Restores proper alignment when cracked, warped, or broken facade causes interference
• Helps prevent drafts and minor water splash at the dispenser area

• Disconnect power and shut off water to the appliance before servicing
• Many installations require removing the dispenser bezel and releasing snap-clips or screws; save hardware for reinstallation
• Handle plastic trim carefully to avoid scratches; use a soft pad when setting parts down

This backsplash assembly replaces the rear panel on a freestanding range to restore wall protection and the appliance's finished rear appearance. It covers openings at the back and helps keep wiring and components protected and tidy. What it does:

• Covers the rear opening of the range to protect the wall from heat, grease and spills.
• Conceals wiring and access holes to help keep connections protected and out of view.
• Restores damaged, dented, rusted or missing rear trim caused by impacts, corrosion or wear.
• Provides the correct mounting surface for rear-mounted trim and components.

• Disconnect power to the appliance at the breaker before beginning any service.
• Remove the range from the wall if needed to access mounting screws; have a helper if the range is heavy.
• Hold the new backsplash in place and confirm alignment before tightening fasteners; retain original screws if replacement hardware is not supplied.

The Dispenser Assembly is an OEM replacement part for GE refrigerators. This actuator is responsible for controlling the functions of the refrigerator's dispenser, allowing you to dispense water or ice.

A bad dispenser actuator assembly can occur due to wear and tear, damage, or component failure over time. If you notice symptoms such as the dispenser not responding to your input, loose or wobbly movement of the actuator, or the dispenser not dispensing water or ice properly, it may indicate a need to replace the actuator assembly.

Symptoms of a bad dispenser actuator assembly include:

• Unresponsive dispenser
• Loose or wobbly actuator movement
• Improper dispensing of water or ice

Restore your refrigerator's dispenser by replacing the faulty dispenser actuator assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Control panel overlay that replaces worn, faded, or damaged printed labels on the console. Restores readable button markings and a factory look while protecting the underlying control surface from everyday wear. What it does:

• Replaces the printed graphic layer on the console so buttons and settings are easy to read.
• Protects the control surface from scratches, spills and wear.
• Helps resolve symptoms like faded or peeling labels and unclear button legends.
• Maintains the original appearance and layout of the control area.

• Disconnect power (unplug or switch off breaker) before servicing the appliance.
• Remove the console or trim carefully to avoid damaging switches, clips or wiring; adhesive may need to be softened or cleaned.
• Handle the overlay by the edges to avoid fingerprints on the printed surface; use appropriate cleaners and let adhesives fully set before reuse.

Faceplate restores your appliance's control area by covering and protecting the electronic control board and buttons. It replaces cracked, dented or faded panel trim to improve appearance and help keep spills and debris away from controls. What it does:

• Covers and protects the control board and button assemblies from spills, grease and dust
• Restores the appliance's cosmetic appearance when the original faceplate is cracked, dented or faded
• Helps keep control buttons seated and prevents debris from interfering with switches
• Fits into the existing control housing using the original mounting locations

• Disconnect power to the appliance before beginning any repair
• Remove control knobs and the old faceplate to avoid damaging clips or wiring
• Handle edges carefully; replacement installs using the original screws/clips where applicable
• After installation, restore power and verify all controls operate normally; if controls do not respond, inspect the control assembly and wiring

Color: White

This keypad is the user interface touchpad for the appliance's control panel, letting you select cycles and settings with responsive button inputs. It replaces a worn or unresponsive touchpad to restore normal front-panel control. What it does:

• Registers button presses and sends user commands to the appliance control board
• Restores front-panel responsiveness when buttons are sticking or unresponsive
• Helps correct intermittent or missing input signals that prevent cycle selection
• Can resolve issues where the display shows settings but will not accept changes

• One keypad assembly

• Disconnect power before servicing
• Handle the keypad assembly carefully and avoid flexing or contaminating the ribbon cable/contacts
• Reconnect ribbon cables and secure any retaining clips; ensure the keypad is seated flush in the control bezel
• If problems persist after replacement, check the main control board and connectors for damage

This Drive PWB is the replacement electronic board that controls the appliance's drive functions, restoring reliable motor and transmission commands for normal operation. What it does

• Controls drive motor speed and direction and sends/receives signals to the main control
• Can resolve symptoms such as no spin/agitate, erratic drive behavior, or unresponsive drive controls
• Re-establishes communication between drive assembly and console when board failure is the cause
• Works as the direct replacement board for the drive electronics in compatible units

• Disconnect power to the appliance before service to avoid shock—verify unit is de-energized
• Handle the board by its edges and avoid touching components; observe basic ESD precautions
• Reconnect all connectors in their original positions and secure mounting hardware

This control panel assembly provides the front-facing electronic interface and buttons that let you select cycles, options, and start or stop the appliance. It restores responsive controls and readable push-button or touch operation. What it does:

• Houses the appliance's main user controls and display so you can select cycles and settings
• Sends user commands to the main control board for operation
• Replaces worn, cracked, or non-responsive buttons or a faded display
• Helps resolve issues where buttons don't register or the panel shows no response

• One control panel assembly as shown

• Disconnect power before attempting service to avoid electrical shock
• Replacement generally requires removing the front console or trim; keep screws and connectors organized
• Handle the panel carefully to avoid damaging the display and ribbon/connectors

This control panel is the user-facing console assembly that houses buttons, touch controls and the display, letting you select cycles and monitor oven status. Replaces a worn, cracked, or unresponsive console to restore normal control operation. What it does:

• Provides the front-facing buttons/touch keys and display used to start and adjust cooking cycles
• Relays user commands to the oven control board for cycle selection and timer functions
• Commonly replaced for symptoms such as unresponsive keys, missing or dim display, or cracked/damaged console
• Interfaces with the main control; does not include internal control electronics

• Disconnect power to the appliance at the breaker before starting any repair
• Replacement typically requires removing the oven door or trim and unscrewing the old panel; keep screws and brackets for reassembly
• Handle the display and ribbon/connectors carefully to avoid damage; verify connector seating before restoring power
• If other control symptoms persist after replacement, test the main control board and wiring harness for faults