Washer Gasket & Seal

Replace the boot seal assembly Read more

I was able to find a great video on YouTube to replacing the video. This allows me to save money on a service call & perform the job myself. Read more

I ordered new door gasket, front and rear clamp for gasket and installed them. Read more

An online search for LG washing machine parts came up with a repair video from Appliance Parts Pros. I watched the video. It was very well done, very detailed, and took you step by step through the entire process to replace the tub bearings and the spider, from start to finish. After watching the video, I realized this repair was well within my abilities. No specialized tools were needed. I ordered the parts from Appliance Parts Pros, and all items were in stock and delivered within a couple... Read more

I ordered the dispenser and the distribution nozzle since the old one was in bad shape. I also replaced the boot since I had to take the entire machine apart and it is 20 years old. I watched your videos on you tune to learn what to do. I recently lost my job and really could not afford to hire someone to fix my washer. I have to say it wasn't that hard to do and my wife was so happy that I was able to fix it myself! I probably saved $200 or $300 in service calls and labor on top of what they... Read more

Replaced Gasket with New Gasket from Appliance Parts Pros Read more

Replaced It With New One Read more

Turned out that the large gray boot/gasket had finally started to harden and deteriorate right at the bottom where the drain hose is. No surprise it leaked after seeing that. Installing the new gasket (and new clamps which I figured I would replace at the same time) did the trick. Fairly simple install. Do yourself a favor and buy the spring pliers to remove/install the clamps. Well worth the time and hassle they will save you. Read more

Ordered a new gasket and had it installed. Read more

Replaced mounting stem and tub bearings Read more

First I watched the very, very helpful video (twice), then I planned out the job in regards to tools, work area, and access. I have stacked units of washer/dryer due to space restrictions and had to ask my son-in-law to help me lift the dryer of the washer once I had prepared the process by fabricating 2 pieces of 3/4" plywood to turn the dryer and then slide it out far enough were 2 people can lift it and then set it on some cribbing for easy handling. Disconnected the power, turned off the... Read more

I replaced the door boot with a new one from AppliancePartsPros.com. The most difficult part was starting at the back end of the new boot onto the stationary rim, just in front of the tub. And then anchoring it in place with the existing spring from the previous boot. To start the boot I had to hook the top edge of the boot, where the arrow tab is, onto the rectangular projection on the tub rim and then roll the rubber boot edge down around the tub rim and hope the rim was going into the... Read more

I took apart the washer to find both of the weight balancers had broken in 2 and were banging around. They had also caused the boot seal to rip. I removed the broken weight balancers and replaced them along with a new boot seal. There was one small spot with the seal wasn't fully attached to the outer drum so I had to take it back apart to fix that minor error on my part. Otherwise, it was a fairly easy fix. Read more