Need Help?
Call or text
Control panel overlay for electric and gas ranges. Labels buttons and controls on the interface. Replace if cracked, peeling, faded, or worn out.
Unplugged stove. Removed six 1/4 inch socket head screws from back panel. Removed back panel. Removed plug on the back of the OCB. Removed OCB. Used Philips screwdriver to remove four mounting screws (and cracked pieces of the mounting holes). If you can get to this point, installing the new OCB is pretty self explanatory. Read more
Electronic touch pad control panel for upright freezers. Snaps into the door to manage temperature settings and display. Replace if cracked, unresponsive, or showing error codes.
Fixed it by replacing the electronic control board. Only 30 min. to fix. (See further down for effort to diagnose the problem.) Most of this "fixing time" was spent removing the control panel to access the control board that is attached to it. My freezer has the control panel located in the top center of the door. The only way to remove the control panel is to pry the panel out of the door using a thin-bladed putty knife.The instructions provided were very good in explaining the process;... Read more
Dispenser not working or loose? This refrigerator dispenser frame secures ice and water dispenser components. Moderate DIY repair with video guide.
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly. Read more
Touch pad overlay for ranges and ovens. Covers the control board with buttons and display panel. Replace if cracked, peeling, faded, or worn out.
Replaced Oven control Board, I actually had a "professional" appliance repair man come to the house and tell me what was wrong with the oven. While he was standing in my kitchen, I noticed he pulled up the AppliancePartsPros.com website to quote me the pricing for the parts. I did not see it necessary to pay him the marked up price. He left the house without repairing the oven I proceeded to order the parts that same evening, replaced the bad parts the same day I received them. I noticed while... Read more
This back panel assembly replaces a damaged or missing rear cabinet panel to protect internal components and keep the unit's cabinet aligned and secure. Restores a clean fit and helps reduce rattles from a loose or bent back. What it does:
After unplugging the dryer, I removed knobs and control panel. I removed the 3 connectors to start switch. I had to cut and replace one connector due to shorted wire which burnt the connector. I attached new connector and then attached these to start switch. I then remounted all three switches to new control panel and reattached control panel to dryer. Plugged in and started right up! Thank you for the helpful video. Read more
Covers and labels control panel buttons on your range. Replace if the overlay is cracked, peeling, faded, or worn, making buttons hard to read or use.
Well, after searching for a model number on the range, had to pull the existing module for the part number. Ordered and was shocked to see it arrive the very next day (no, didn't pay for next day). Went back together a lot quicker then me taking apart! Read more
Dryer back panel assembly houses control switches and touch pads. Replace if cracked, broken, or switch mounts are damaged causing buttons to fall through.
Replaced back splash on dryer, repair took 5 minutes Read more
White faceplate graphics overlay that covers and protects your range control panel. Replacement needed when scratched, cracked, discolored, or peeling from heat.
Ordered a new Faceplate Graphics, removed old faceplate and installed new. Required removing control panel with switches and display, including 10 screws to get to the faceplate. Faceplate has glue on rim, so had to peel off old faceplate, remove residue, then put on new. Not difficult, but reaching to remove the screws was a little challenging in a small kitchen. Now unit looks brand new! Read more
Decorative overlay label for range hood control panel. Fits over touch pad to provide clear button labels. Replace if cracked, faded, or peeling.
Pretty easy job for a DIYer. The control panel gets loose when the plastic tabs break for one reason or the other. You can replace the control board housing without having to replace the control board. Note also that the control board housing comes with a new control overlay label, so you don't need to buy the label like I did. You will need torx screw drivers or torx bit set - two sizes T20 and maybe T15. Start by remove the three metal filters (I replaced mine during this repair as they... Read more
Replace a cracked or broken dispenser cover to restore your refrigerator's appearance. Simple DIY repair, typically completed in 15 minutes or less.
Replaced with ordered cover and new screws. Cover was a perfect replacement for original. Replacement took less than 15 minutes to complete. Read more
Replace cracked or peeling dispenser cover label. Easy DIY fix—peels off like a sticker, alcohol wipe surface, press new label on. 10-minute repair.
Removed old label, took the glue residue off, wiped it down with rubbing alcohol then attached the new label on to the fridge. Read more
Adhesive-backed overlay that restores worn or faded control panel graphics on your range. Replaces damaged, cracked, or peeling faceplates for clean labels.
Got a replacement real fast delivery from you and exchange it fast and easy Read more
Replaces cracked or broken dryer backsplash assembly. Provides mounting surface for timer and switches. White panel with cycle graphics restores appearance.
Ordered new backsplash panel and replaced it , very easy fix Read more
White adhesive clock overlay for oven control panels. Peels off and sticks on to replace cracked, worn, or faded overlays. Easy cosmetic upgrade.
My husband turned the oven to cook one night and there was a loud pop noise. After that there was no power getting to the control board and thus leaving my oven useless I watched the very easy to follow video posted on here associated with my part and I felt confident I would be able to make this repair on my own. I bought the control board as well as the new overlay (mainly cause I didn't want to try and peel off the old overlay and reuse it) the total time for my repair was less than 15... Read more
Replace your cracked, worn, or punctured range touch pad overlay. This protective cover installs over the control panel, restoring button function and appearance.
Ordered a new Oven Control unit and an Overlay (ours was punctured in a few places -- old and brittle). Opened the stovetop and removed some screws from the front control panel area. Followed the advice from Appliance Parts Pros' video to take a photo of the locations of all the connections on the old panel before removal -- that was an instrumental step to the success of this project! The whole job took just over an hour. Now the over controls and timers work like new -- because they are!... Read more
Rear console housing for washer controls. Supports and protects user interface components. Replace when original panel is cracked, loose, or damaged.
Replaced the entire back splash, I would like to give kudos to AppliancePartsPro, the item was shipped in a timely manner Read more