Blower Wheel Or Fan Blade

This blower fan blade replaces a worn or damaged blade to restore proper airflow in compatible Broan ventilation units. It rebalances the blower assembly and helps reduce vibration and noise for more effective ventilation. What it does:

• Spins on the blower motor to move air through the hood or ventilation system
• Replaces cracked, bent, or missing blades that cause reduced airflow
• Stops or reduces wobble and vibration that can make the fan noisy
• Helps restore proper ventilation and kitchen odor/smoke removal

• Disconnect power to the appliance before starting any repair
• Handle blade edges carefully; wear gloves to prevent cuts
• Tighten mounting hardware securely and test operation at low speed first

This replacement fan blade restores airflow in compatible Broan ventilation hoods and exhaust fans, helping reduce noise and improve ventilation performance. Designed to match the original fit and balance for reliable operation. What it does:

• Replaces a bent, cracked, or missing exhaust fan blade to restore proper airflow
• Helps stop rattling, vibration, or scraping noises caused by damaged blades
• Restores balanced rotation to reduce motor strain and improve venting
• Suitable for use in range-hood and bathroom exhaust blower assemblies where this blade is specified

• One (1) fan blade

• Turn off power to the appliance at the breaker before servicing
• Verify blade orientation and secure mounting per the original hardware
• Inspect shaft and housing for damage; replace motor or fasteners if worn

This evaporator blower fan blade circulates cold air through the refrigerator to maintain even cooling and proper frost control. Replacing a worn or broken blade restores airflow and helps the appliance cool more consistently. What it does:

• Spins on the evaporator motor to move air across the evaporator coils
• Promotes even temperature distribution inside the fresh-food and freezer compartments
• Helps prevent frost build-up by maintaining steady airflow
• Commonly replaced when airflow is weak, the fan is noisy, or the blade is cracked or broken

• One fan blade

• Disconnect power before accessing the evaporator/fan area to avoid shock or injury
• Handle the blade carefully to avoid bending fins or damaging the motor shaft
• The motor shaft and mounting hardware are intact before installation

This blower assembly circulates air through the appliance to support proper airflow and drying performance. Replacing a worn or damaged blower restores airflow and helps the unit heat and dry efficiently. What it does:

• Moves air through the appliance to support heating and drying cycles.
• Restores proper airflow when the original blower is cracked, blocked, or worn.
• Helps prevent long dry times and overheating caused by restricted airflow.
• Reduces unusual rattling or grinding noises coming from the lower cabinet.

• Disconnect power before servicing to avoid electric shock.
• Access may require removing lower front or kick panels.
• Note blower orientation and duct seals during removal to ensure proper reinstallation.
• If noise or airflow issues persist after replacement, inspect the vent duct and motor bearings.

The Fan Blade is an OEM replacement part for Frigidaire window air conditioners. Located inside the unit behind the protective grill, the fan blade rotates to circulate cooled air throughout the room. Made with corrosion-resistant materials, the precisely balanced blade withstands constant rotation during seasonal operation.  

Symptoms of a bad fan blade include:

• Excessive vibrations or strange noises from the AC unit  
• Reduced air circulation felt in the room
• The blade visibly rubbing or hitting the fan enclosure

Causes can be dirt buildup causing imbalance, broken blade tips from impacts, or loosened set screws allowing shaft wobbling over extended use. 

Replacing this OEM Frigidaire part restores smooth, powerful air distribution. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Condenser Fan Blade is an OEM part for GE refrigerators. This part helps to cool the condenser coils by circulating air over them, which is crucial for maintaining the refrigerator's proper temperature and efficient operation.

Common causes of a bad condenser fan blade include physical damage from debris or impacts, wear and tear over time, or warping due to high temperatures.

Symptoms of a bad Condenser Fan Blade include:

• The refrigerator running hotter than usual
• The fan making unusual noises or vibrations
• The fan not spinning or spinning erratically
• Reduced cooling efficiency

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement blade fan moves cold air across the evaporator to help maintain even temperatures inside the compartment. It restores proper airflow for more consistent cooling and helps reduce frost buildup when working with a good motor. What it does:

• Circulates air across the evaporator to distribute cold air through the compartment
• Restores airflow when a cracked, warped, or missing blade reduces cooling efficiency
• Helps reduce uneven temperatures and localized warm spots caused by poor airflow
• Can reduce abnormal noises caused by damaged or unbalanced blades

• One replacement blade fan

• Disconnect power to the appliance before starting any repair
• Remove the evaporator cover/panel to access the fan assembly per your model's service instructions
• Handle the replacement blade carefully to avoid bending the blades or contaminating the evaporator
• If the fan motor or mounting hardware is damaged, replace those parts as well for reliable operation

The Blower Wheel is an OEM part for Whirlpool dryers. This component is responsible for circulating air through the dryer drum and the exhaust vent, ensuring efficient drying of clothes. It helps to maintain the proper airflow, which is crucial for the drying performance and the prevention of overheating.

Over time, the blower wheel can become damaged due to debris, lint buildup, or regular wear and tear. If the blower wheel becomes obstructed or misaligned, it can significantly impact the dryer's efficiency and safety.

Symptoms of a bad blower wheel include:

• Longer drying times
• Unusual noises such as thumping or rattling
• Poor airflow from the dryer vent
• The dryer overheating or shutting down unexpectedly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This replacement blade-fan moves air inside the appliance to help maintain proper temperature and prevent ice buildup. It restores airflow so the appliance can cool and cycle as designed. What it does

• Circulates air over coils and compartments to support even cooling
• Helps prevent frost accumulation and hot spots caused by poor airflow
• Commonly replaced when airflow is weak or the fan is noisy or damaged
• Works with the original fan motor hub to spin smoothly and efficiently

• One blade-fan

• Disconnect power before beginning any repair to avoid electrical shock
• Handle the fan blades carefully to avoid bending; a warped blade can vibrate or rub
• Inspect the fan hub and motor before installation; replace damaged mounting hardware as needed

This axial flow fan circulates air inside the appliance to help cool components and maintain proper ventilation. It replaces a worn or damaged blower wheel to restore airflow and reduce overheating risk. What it does:

• Moves air across coils or internal components to support cooling and ventilation.
• Helps prevent overheating and supports consistent appliance performance.
• Can reduce unusual temperature-related symptoms or poor cooling/airflow.
• Fits into the appliance's blower/motor assembly to restore proper airflow.

• Disconnect power to the appliance before starting any repair.
• Handle the fan blades carefully to avoid bending or damage.
• Verify proper seating on the motor shaft and secure fasteners per the appliance's service instructions.