General Electric Drip Pan

The Grill Recess is an OEM replacement part for GE refrigerators. It is located in the dispenser area, acting as a catch tray to collect drips and spills from the water or ice dispenser. This component helps keep the dispenser area clean and prevents water from dripping onto the floor or refrigerator surfaces.

Over time, the grill recess can become cracked, discolored, or damaged due to regular use and exposure to moisture. Replacing it ensures a clean appearance and continued functionality of the dispenser area.

Symptoms of a bad grill recess include:

• Cracks or visible damage to the tray
• Difficulty fitting the grill securely in place
• Water pooling or dripping from the dispenser area
• Discoloration or wear from prolonged use

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drip Pan is an OEM part for GE ranges. It sits underneath the burners to catch spills, drips, and splatters during cooking, preventing these residues from reaching the internal components of the appliance. This helps in maintaining cleanliness and safety, while also making it easier to clean the stovetop.

Causes of a bad drip pan can include prolonged exposure to high heat, which can cause warping or discoloration, and the accumulation of food debris and grease, which can lead to corrosion or foul odors. 

Symptoms of a bad Drip Pan include:

• Visible rust or corrosion
• Warping or misalignment with the burners
• Persistent stains or burnt-on food that cannot be cleaned
• Unpleasant odors emanating from the stove area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The 8 Inch Burner Bowl is an OEM part for GE ranges and cooktops. Positioned beneath the burner element, this bowl catches spills and drips that occur during cooking. It helps keep the cooktop clean and ensures efficient heat distribution by reflecting heat back towards the cookware.

Causes of a bad burner bowl can include exposure to high heat, food spills, and cleaning chemicals, which can lead to staining, rusting, or damage over time. A deteriorated burner bowl can affect its appearance and functionality.

Symptoms of a bad burner bowl include:

• Visible stains, rust, or discoloration
• The burner element not fitting securely or wobbling
• Difficulty in cleaning due to stubborn residue or corrosion
• Reduced heat efficiency due to the bowl’s condition

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drip Pan is an OEM part for GE ranges. This part is located under the burner to catch spills, drips, and crumbs during cooking. The drip pan helps maintain cleanliness by containing messes, making it easier to keep the cooktop clean and preventing spills from reaching the internal components of the appliance. Note: This is the drip pan used with the 6-inch element. For the drip pan used with 8-inch element, order WB31K5025.

Causes of a bad drip pan can include regular wear and tear, discoloration from repeated use, or damage from heavy pots and pans. 

Symptoms of a bad drip pan include:

• Visible cracks or holes in the pan
• Rust or significant discoloration
• Difficulty in cleaning the pan
• The pan not fitting securely under the burner

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The 6 Inch Burner Bowl is an OEM part for GE ranges and cooktops. This component is positioned beneath the burner element to catch spills and drips that occur during cooking. It helps keep the cooktop clean and maintains efficient heat distribution by reflecting heat back towards the cookware.

You should replace the burner bowl if it becomes stained, rusted, or damaged. Over time, exposure to high heat, food spills, and cleaning chemicals can cause the burner bowl to deteriorate, affecting its appearance and functionality.

Symptoms of a bad burner bowl include:

• Visible stains, rust, or discoloration
• The burner element not fitting securely or wobbling
• Difficulty in cleaning due to stubborn residue or corrosion
• Reduced heat efficiency due to the bowl’s condition

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grill Recess is an OEM part for GE refrigerators. This part collects spills and overflow to keep the dispenser area clean. 

Causes of a bad grill recess can include physical damage from impacts, prolonged exposure to moisture leading to corrosion, or the accumulation of dirt and mineral deposits.

Symptoms of a bad grill recess include:

• Visible cracks or breakage
• Water leakage around the dispenser area
• Difficulty in removing or installing the grill
• Accumulation of water or debris in the dispenser area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The 8 Inch Burner Bowl is an OEM part for GE ranges and cooktops. Designed to fit beneath the burner element, this part reflects heat back onto the cookware for efficient cooking and catches spills and drips to keep the cooktop clean. Made from durable materials, the burner bowl is easy to remove and clean.

Causes of a bad burner bowl include excessive heat exposure leading to discoloration or warping, accumulation of spills and debris that can corrode or damage the bowl, and physical damage such as dents or cracks.

Symptoms of a bad 8 Inch Burner Bowl include:

• Noticeable discoloration or warping from heat exposure.
• Rust or corrosion caused by accumulated moisture and debris.
• Difficulty fitting the bowl properly due to physical damage.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Porcelain. Color: black. It measures about 10 inches in diameter at its widest point at the top.

Electric range 6 inch surface unit drip bowl. Color: Chrome. It measures about 8 inches in diameter at its widest point at the top. For an 8 inch large drip pan order WB32X106

Color: stainless. It measures about 8 inches wide by 4 inches deep.

This Grille Recess is the dispenser drip tray that sits in the refrigerator's dispenser recess. It catches stray water and ice and provides a stable resting surface for your cup, helping keep the area clean and tidy.

• Collects drips and splashes from water/ice dispensing to help protect door surfaces
• Provides a stable platform for cups while filling
• Replace if cracked, warped, stained, or missing
• Can help reduce puddling around the dispenser area

• Disconnect power before servicing
• Lift out the old grille from the dispenser recess; clean any buildup
• Align and press the new grille into place until fully seated; do not force

This is a large burner bowl replacement that can work with many models of stoves and ranges. Another term for these bowls is drip pan. The purpose of the drip pans is to protect the inner workings of the stove. They catch spills and drips when cooking. The stove shouldn't be used if the drip pans are damaged or missing.The main reason that the burner bowl might need to be replaced is that it has become dirty and can't be easily cleaned. Additionally, there is the chance that the burner bowls could eventually start to rust. This is a simple repair and should take only a few minutes. Be sure to unplug the stove or turn off the gas before starting a repair.The large burner bowl is for use with certain models of range from Whirlpool, General Electric, Kenmore, and Hotpoint. It is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

The 6 Inch Burner Bowl is an OEM part for GE electric ranges and stovetops. Designed to fit beneath the 6-inch electric coil elements, this burner bowl serves as a catchment for spills, drips, and crumbs that occur during cooking. Not only does it help keep the cooktop area clean, but it also reflects heat back to the cookware, improving cooking efficiency. 

Causes for replacement often include accumulated spills and high heat exposure over time, leading to aesthetic wear and tear or functional degradation. 

Symptoms of a bad 6 Inch Burner Bowl include:

• Rusting or corrosion that can affect the reflectivity and heat distribution
• Deep scratches or dents that may harbor bacteria and debris
• Discoloration or stubborn stains that can't be removed, affecting the appearance of your cooktop

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fits GE and HotPoint ranges where a ceramic terminal block is used (loop type plug-in surface elements). Color: chrome. It measures about 8 inches in diameter at its widest point at the top. Matching 8 inch drip bowl: WB31X5011. Surface elements: 6 inch WB30X218, 8 inch WB30X219. Element terminal block: WB17X5051.

Fits GE and HotPoint ranges where a ceramic terminal block is used (loop type plug-in surface elements). Color: chrome. It measures about 10 inches in diameter at its widest point at the top. Matching 6 inch drip bowl: WB31X5010. Surface elements: 6 inch WB30X218, 8 inch WB30X219. Element terminal block: WB17X5051.

This small burner bowl sits beneath a surface coil element to catch drips and help keep the cooktop clean and protected. Replacing a damaged or stained bowl restores a neat appearance and proper support for the element.

• Collects spills beneath the surface element and shields internal components
• Supports the coil so it sits correctly in the burner opening
• Replace when rusted, warped, discolored, or missing
• Helps make cleanup easier after boilovers and everyday cooking

• Disconnect power before servicing the range
• Allow the surface element to cool completely
• Lift out the surface element and old bowl; position the new bowl, then reconnect the element
• Verify the element is seated firmly and level before restoring power

This 8-inch surface burner drip pan sits beneath a plug-in coil element to catch spills and crumbs and support the element. Replacing a stained or warped pan helps keep the cooktop cleaner and ensures the burner sits level.

• Collects drips and debris under the 8-inch coil element
• Supports the element so it seats properly and sits level
• Refreshes the cooktop's appearance by replacing stained or rusted pans
• Common symptoms: burner wobbles, pan is warped/corroded, persistent baked-on residue

• Disconnect power and allow the cooktop to cool completely.
• Unplug the coil element from the receptacle and set it aside.
• Lift out the old pan; align the new pan with the opening and any locator tabs, then seat it flat.
• Reinstall the element, fully inserting the terminals and ensuring it rests correctly in the pan.