General Electric Drip Pan

This is a medium burner bowl, also sometimes known as a drip pan, and it is made for ranges, stoves, and cooktops. This is a genuine replacement part made by General Electric. The burner bowl is situated underneath the heating element and is able to catch any food or debris that falls when cooking. The bowl or drop pan is there to catch any and all waste so that the user may easily clean up after the heat is turned off and the appliance is cooled down.A new medium burner bowl might be needed if the current one is damaged in any way including being broken or bent so that is it not fully secure under the burner. This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with ranges, stoves, or cooktops made by General Electric.

Color: Chrome. It measures about 7-1/2 inches wide by 4 inches deep. For Black, order WR17X12324.

Refresh your cooktop with this white burner drip bowl. It sits beneath a surface coil element to catch spills and splatters, reflect heat toward cookware, and help the element seat correctly for consistent performance and easier cleanup.

• Supports and centers the surface coil element
• Collects drips to protect the cooktop surface
• Reflects heat to aid efficient burner performance
• Restores appearance when the original bowl is stained, rusted, or warped

• Disconnect power to the range before servicing.
• Pull the surface coil straight out of the receptacle to remove it.
• Lift out the old bowl; align the locator notch on the new bowl and seat it flat.
• Reinsert the element fully and verify proper operation before restoring power.

This 6-inch drip pan sits beneath a plug-in coil surface element to catch spills and reflect heat. Replacing a stained or warped pan refreshes the cooktop and helps the element seat properly. What it does:

• Installs under a 6-inch plug-in coil element to collect drips and boil-overs
• Reflects heat back to cookware for consistent heating
• Supports and aligns the element so it sits level in the cooktop
• Common signs to replace: heavy discoloration, rust, pitting, warping, or a burner that won't sit level

• 1 6-inch drip pan

• Disconnect power at the breaker and let all surface elements cool completely
• Lift the coil element straight out of its receptacle; remove the old pan
• Align the indexing notch and seat the new pan; firmly reinstall the element
• Verify the element is fully engaged and level before restoring power

This 8-inch porcelain drip pan sits beneath the surface coil to catch spills and help reflect heat toward the cookware. Replacing a stained or warped pan refreshes the cooktop's look and ensures the element seats correctly.

• Collects drips and debris under the 8-inch surface coil
• Helps reflect heat back toward the cookware
• Provides proper support so the coil element sits level and stable
• Replace if pan is stained, rusted, warped, or if the element wobbles or there are persistent odors/smoke from burned-on spills

• Disconnect power and allow the burner to cool completely
• Pull the surface coil straight out of the receptacle and set it aside
• Lift out the old pan, clean the recess, and align the notch on the new pan
• Seat the pan flat and fully reinstall the coil into the receptacle

This dispenser recess grille sits in the ice/water dispenser well on the refrigerator door. It supports cups and lets minor drips pass through to the tray below, helping keep the area cleaner and more presentable.

• Provides a stable surface for cups and bottles at the door dispenser
• Slots allow drips to drain into the drip tray beneath
• Restores a clean, finished look to the dispenser area
• Common signs it's needed: cracked or warped grate, staining, missing piece, drips pooling on the surface

• For safety, disconnect power and shut off water before working near the dispenser area
• Lift out the old grille from the dispenser recess; some models use small locating tabs
• Clean and dry the recess and tray area before installing
• Seat the new grille flat and fully into position so it drains correctly

This grill recess is the interior trim piece that supports and positions the oven grill/broiler assembly, restoring proper fit and appearance for the cooking cavity. Replacement helps keep the grill aligned and the oven interior finished. What it does:

• Provides a stable mounting area and trim around the oven grill/broiler opening
• Keeps the grill securely positioned for even broiling and cooking
• Restores damaged, bent, or missing trim for improved appearance
• Helps prevent food and debris from collecting behind the grill trim

• One grill recess trim piece as pictured

• Disconnect power (and gas, where applicable) before servicing the appliance.
• Remove oven racks and any obstructing panels to access the grill recess; keep all fasteners.
• Use common hand tools; support the grill assembly while removing/installing the trim.

Color: Gray. Left hand side

This trough drain collects and channels defrost and condensation water from the evaporator area to the drain system, helping prevent leaks and pooling inside the refrigerator. It restores proper water flow and reduces standing water. What it does:

• Collects defrost/condensation runoff from the evaporator area and directs it to the drain pan.
• Helps prevent water pooling inside the fridge or under crisper drawers.
• Reduces ice buildup and musty odors caused by trapped moisture.
• Replaces cracked or warped troughs that allow leaks or improper drainage.

• Disconnect power to the appliance before beginning any work.
• Remove food, shelves and the evaporator cover/pan as required for access; follow the service manual for your model.
• Clean the drain tube and drain hole before installing to ensure proper drainage.

This is a double drip pan is made for ranges, stoves, and cooktops. This is a genuine replacement part made by General Electric. The double drip pan is situated underneath two heated elements and is able to catch any food or debris that fall when cooking. The double drip pan is there to catch any and all waste so that the user may easily clean up after the heat is turned off and the appliance is cooled down.A new double drip pan might be needed if the current one is damaged in any way including being broken or bent so that is it not fully secure under the burner. This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with ranges, stoves, or cooktops made by General Electric.

A left-side double burner pan that supports two cooktop burners and helps contain spills and drips for easier cleanup. Durable replacement to restore proper burner support and alignment on compatible gas ranges. What it does

• Holds and centers two adjacent burners so pots and pans sit flat and stable.
• Helps catch food, grease and liquids to prevent spills from reaching the cooktop cavity.
• Fits into the left-side pan location and works with the cooktop's burner assembly.

• Allow the cooktop to cool and shut off power/gas to the appliance before starting.
• Remove grates and existing pans carefully; align the replacement pan to the burner openings and set into place.
• Use non-abrasive cleaners to avoid damaging the finish; avoid bending or flexing the pan during install.

This vaporizer pan and drip tray assembly fits refrigerators. When the freezer automatically defrosts, meltwater must be moved out. It empties out of a drain line into the drain pan/drip tray. The vaporizer portion of the assembly then helps to evaporate the water. Made from stainless steel, it resists corrosion and damage, but prolonged use may result in rust. Eventually, it will need to be replaced.The most common sign that the drip tray and vaporizer pan need to be replaced is visible water leaking from under the refrigerator, or the drain line backing up into the freezer. Replacement will require accessing the bottom of the refrigerator. Unplug it from the power, then locate the four bolts that hold it in place. Use a ratchet and socket to remove the bolts, and then install the new pan assembly.This is a genuine OEM part. It is sold individually, and is designed to work with GE refrigerators.

This shield trough assembly catches and channels defrost and condensation water away from the refrigerator cabinet to help prevent leaks and ice buildup. It's a direct-fit replacement that restores proper water drainage and containment. What it does

• Collects defrost and condensation runoff and directs it to the drain pan
• Helps prevent water pooling inside the cabinet and under the appliance
• Reduces ice or frost accumulation caused by redirected water
• Provides structural support for adjacent trim and evaporator covers where applicable

• Disconnect power to the appliance before beginning any repair.
• Remove relevant shelves, drawers, and trim panels to access the trough; keep fasteners organized.
• Handle gently to avoid bending or damaging mounting tabs and seal surfaces.

This broiler pan grid is the oven rack insert that holds food above the broil pan to promote even browning and let drippings fall away. It restores broiling performance for ovens using a two-piece broil pan set. What it does:

• Supports meats and vegetables during broiling so heat circulates around food for better sear and browning
• Allows drippings to fall into the lower broil pan to reduce smoke and flare-ups
• Replaces a missing, warped, or damaged grid that can cause uneven cooking or food slipping through
• Fits into the matching broil pan to restore original broiling configuration

• Ensure oven is off and grid has cooled before handling or installing
• Place grid into the broil pan with grid edges seated securely in the pan
• Clean after use with warm, soapy water; avoid harsh abrasives that can damage the finish