Handle

This refrigerator door handle restores a solid, comfortable grip for opening and closing the door. Replace a cracked or loose handle to improve everyday use and keep your appliance looking and functioning like new.

• Provides the handhold used to open and close the refrigerator or freezer door
• Secures to the door using the factory mounting points for a stable fit
• Replaces cracked, broken, or scuffed handles
• Addresses a loose, wobbly, or missing handle that won't stay attached

• Disconnect power to the appliance before servicing
• Protect the door finish with tape or a cloth around the work area
• Use the correct driver (Allen/hex/Torx per model) to remove and install fasteners
• Align the handle with the mounts and tighten screws evenly—do not overtighten

This part is a lower tail handle. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached tail handle on multiple different models and brands of refrigerators. The tail handle fixes to the exterior of the refrigerator. A missing or broken tail handle can prevent the door from functioning properly. The tail handle can become detached from the appliance with regular use and may require replacement. Always ensure the appliance is disconnected from its power source before attempting any repairs. Take appropriate safety precautions and wear protective work gloves. Proper tools are needed to install this part. For more accurate installation information on how and where to install this replacement lower tail handle, refer to the original manufacturer diagrams or owner's manual.As an authentic replacement part, this lower tail handle is suitable for use on various models of refrigerators manufactured by General Electric and Hotpoint. Please note that this is a genuine part made of high-quality and durable plastic and is sold individually.

This microwave door handle provides a solid, comfortable grip to open and close the door. Replace a cracked or loose handle to restore easy access and keep the door operating as intended.

• Provides the pull point for opening and closing the door
• Helps ensure a secure grip and smooth door operation
• Common failure signs: broken or missing handle, cracked mounting posts, loose/wobbling handle, door hard to open
• Restores the appliance's appearance and usability

• Disconnect power to the appliance and allow it to cool before starting
• Access the mounting screws from inside the door by removing the inner trim as directed in your model's service information
• Transfer any end caps or trim pieces from the old handle if applicable
• Tighten screws evenly and verify proper door alignment and latch operation

Replace a broken or wobbly oven door handle with this genuine replacement. It restores a secure, comfortable grip so you can open and close the door safely and refreshes the look of your range or wall oven.

• Provides a sturdy grasp point to open and close the appliance door
• Attaches to the door using internal mounting screws
• Common symptoms: loose or wobbly handle, cracks, broken studs, or missing handle
• Restores appearance after wear or damage

• Disconnect power and allow the appliance to cool completely before servicing
• On many models, remove the door or inner panel to access the handle screws from the interior side
• Support the handle during removal/installation and tighten screws evenly without overtightening
• Verify door alignment and latch operation after reassembly

This fresh food door handle restores a clean look and a secure grip on your refrigerator's main compartment door. Replace a cracked or loose handle to keep everyday opening and closing comfortable, safe, and reliable.

• Provides a sturdy grasp for opening and closing the fresh food door
• Replaces handles that are broken, cracked, loose, or missing
• Helps resolve difficulty opening the door due to a failed handle
• White finish matches original appearance

• Disconnect power before servicing and wear gloves to protect hands
• Support the handle while loosening existing set screws or mounting screws; retain hardware for reuse
• Align the new handle with the door posts or holes and tighten fasteners securely—do not overtighten
• Verify the handle is secure and the door opens/closes normally

This black refrigerator container handle replaces a worn, cracked, or missing pull on an interior bin or drawer. It restores a secure grip so you can easily slide the container in and out on compatible models.

• Attaches to the front of a refrigerator container or its cover to provide a solid handhold
• Replaces cracked, loose, or missing handle pieces
• Helps bins open and close smoothly without stressing the cover/front
• Common symptoms: handle broken or missing, tabs snapped, handle won't stay attached, drawer hard to pull

• Remove the bin/drawer and place the cover or front on a flat, protected surface
• Release the old handle by removing screws or disengaging tabs/clips (varies by model); keep hardware for reuse
• Align the new handle and snap or screw it into place; do not overtighten
• Handle glass and plastic parts carefully; wearing cut-resistant gloves is recommended

Refrigerator door handle that replaces a cracked, broken, or missing handle, restoring a secure grip and the appliance's appearance so the door opens and closes smoothly. What it does

• Provides a sturdy grip for opening and closing the refrigerator door.
• Replaces a cracked, broken, loose, or missing handle to restore normal use and appearance.
• Mounts to the door with factory attachment points for a direct replacement.
• Helps prevent further damage from trying to open the door without a proper handle.

• For safety, unplug the refrigerator or disconnect power before removing doors or working near electrical components.
• Retain and reuse the original mounting screws/fasteners when possible.
• Avoid over-tightening fasteners to prevent cracking the handle or door finish.

This part is an upper tail handle. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached upper tail handle on multiple different models and brands of refrigerators. This upper tail handle attaches to the outside of the refrigerator and forms the handle used to open the door. A detached or faulty tail handle can prevent the door from functioning properly. If the tail handle becomes detached, opening and closing the door can be difficult. Always ensure the appliance is disconnected from its power source before attempting any repairs. Proper tools are needed to install this part and protective gloves should be worn. For more accurate installation information on how and where to install this replacement upper tail handle, refer to the original manufacturer diagrams or owner's manual.As an authentic replacement part, this upper tail handle is suitable for use on various models of refrigerators manufactured by General Electric and Hotpoint. Please note that this is a genuine part made of high-quality and durable plastic and is sold individually.

This replacement door handle restores a secure grip and makes opening the appliance door easier and safer. It's a direct-fit style designed to match the original part's shape and function for a clean, factory look. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that affect door use
• Helps restore proper alignment and ergonomics when the original handle is damaged
• Reduces the risk of sharp edges or failure from a compromised handle

• Disconnect power to the appliance before starting any repair
• Typical installation requires removing a few screws or clips; keep fasteners for reassembly
• Use hand tools only and avoid overtightening screws to prevent stress cracks

Replacement door handle that restores a secure grip and smooth opening for compatible Whirlpool appliances. Designed to match factory fit and mounting locations to replace cracked, loose, or damaged handles. What it does:

• Provides a sturdy grip for opening and closing the appliance door.
• Replaces cracked, broken, bent, or loose handles that interfere with normal use.
• Matches factory mounting points for a secure, stable replacement.
• Restores function and helps prevent further wear around the door edge.

• Typical installation uses common hand tools (screwdriver or hex driver); follow manufacturer diagrams for correct orientation.
• Disconnect power or unplug the appliance before working near electrical components or sealed areas.
• Align handle over mounting posts, install fasteners securely, and avoid overtightening to prevent damage.

This replacement door handle restores a secure, comfortable grip for opening and closing your appliance door. Swap a cracked or loose handle to improve safety, function, and appearance. What it does:

• Provides the handhold needed to open and close the door safely
• Replaces cracked, broken, or wobbly handles
• Helps prevent further door damage from a loose or missing handle
• Common symptoms include a loose handle, broken posts, or difficulty opening the door due to handle failure

• Includes 1 door handle

• Disconnect power to the appliance before servicing; allow hot surfaces to cool
• Support the door and protect glass/finishes while working
• Use correct tools for the mounting screws; transfer any existing trim as needed
• Tighten hardware snugly without overtightening to avoid damage

This door handle replaces a worn, cracked, or missing handle to restore a secure grip and smooth door operation. Refresh the look of your appliance and get back to reliable, comfortable opening and closing with a factory-fit replacement.

• Provides a solid handhold for opening and closing the door
• Restores proper fit when the original handle is loose, cracked, or missing
• Helps resolve difficulty opening the door or a handle that wobbles or falls off
• Matches original mounting points for straightforward replacement

• Disconnect power (and gas, if applicable) before servicing
• Support the door and access mounting fasteners
• Transfer any handle trim/brackets as needed and reuse existing fasteners
• Do not overtighten, especially on glass or decorative panels; confirm alignment and test operation

Replacement latch assembly that secures the appliance door for reliable closure and operation. Restores proper latch engagement so the door stays closed during cycles and reduces the chance of accidental openings. What it does:

• Physically secures and releases the door by engaging the striker when closed.
• Replaces broken, worn, or loose latches that cause doors to not stay closed, pop open, or fail to engage.
• Helps restore consistent door operation and prevents interruptions during cycles.
• Works with the existing striker and door hardware when installed correctly.

• Disconnect power (or unplug the appliance) before beginning any service.
• Use appropriate hand tools; remove door trim or access panels as needed to reach the latch.
• Keep fasteners and small parts organized to ensure proper reassembly and alignment.
• Test the latch operation several times after installation.

Color: White.

Replace a cracked or loose door handle and restore a secure, comfortable grip for opening and closing the appliance door. This direct replacement helps bring back smooth operation and a clean, factory look. What it does:

• Provides the gripping surface to open and close the door
• Restores safe handling when the original handle is cracked or loose
• Helps maintain proper door operation and appearance
• Common symptoms: broken or missing handle, wobbling/loose handle, difficulty opening the door, cosmetic damage

• 1 door handle

• Disconnect power to the appliance before servicing
• Access and remove the handle's mounting screws (often from the inner door panel or under trim)
• Transfer any spacers/end caps/screws from the old handle as required for your model
• Tighten mounting screws securely but do not overtighten; verify door alignment and operation

Handle assembly replaces a damaged oven door handle to restore a secure, comfortable grip for opening and closing the door. Matches OEM fit to keep the door operating safely and reliably.

• Provides a sturdy grip for opening and closing the oven door
• Replaces cracked, loose, bent, or missing handles that affect safe access
• Restores proper mounting and alignment of the door handle for everyday use
• Fits OEM mounting points for a straight swap with the original part

• Always disconnect power and allow the appliance to cool before working on the door
• Handle installs using the door's existing fasteners; keep original screws or verify correct replacements