Handle

This genuine replacement door handle restores a secure grip and smooth opening for your appliance door. It replaces damaged, cracked or loose handles so you can open and close the door safely and comfortably. What it does:

• Provides a firm, ergonomically-shaped grip for opening and closing the appliance door
• Replaces broken, cracked or loose handles that no longer secure properly
• Restores normal operation and reduces risk of the door slipping from your hand
• Matches OEM fit and mounting points for a direct replacement

• One replacement door handle

• Disconnect power (and water for refrigerators with dispenser) before servicing the appliance
• Remove any trim or access panels per your appliance service instructions to access mounting screws
• Align handle with mounting points, secure with original hardware; do not overtighten to avoid cracking

This stainless steel door handle restores a damaged or worn handle to bring back a secure grip and the refrigerator's finished look. It's a direct replacement designed for the matching Whirlpool appliance series. What it does:

• Replaces cracked, bent, loose or cosmetically damaged door handles
• Provides a solid grip to open and close the door reliably
• Restores the appliance's stainless finish for a consistent appearance
• Matches OEM fit and mounting points when installed correctly

• One stainless steel replacement door handle

• Support the door while removing/installing the handle to avoid damage or injury
• Some installations require removing the door trim or top hinge screws—use common hand tools
• Do not overtighten fasteners; thread engagement should be secure but not forced

Color: Bisque

This genuine-style refrigerator door handle provides a secure grip for opening and closing the fridge door and restores the appliance's appearance after a broken or worn handle. Durable finish matches common Whirlpool styling. What it does:

• Replaces a damaged, cracked or loose refrigerator door handle to restore proper door operation and appearance
• Provides a comfortable, sure hand grip for opening and closing the door
• Helps prevent further cabinet or door damage caused by using a compromised handle
• Fits the OEM mounting points for a clean, factory-like fit

• Use basic hand tools; disconnect power only if panels or lighting need removal for access
• Support the door while removing/installing to avoid strain on hinges or other components
• Keep fasteners and trim pieces organized to ensure correct reassembly
• Replace any damaged clips or screws with OEM parts to ensure secure mounting

This genuine replacement door handle restores a secure, easy-to-grip opening for refrigerators and freezers, refreshing the appliance's appearance and usability. Designed to match OEM fit and finish for a factory look. What it does:

• Replaces a cracked, broken, loose, or missing door handle
• Provides a secure grip for opening and closing the door
• Restores proper alignment and appearance of the appliance front
• Helps prevent further damage from using a compromised handle

• Basic hand tools required; handle typically mounts with screws or clips behind the door liner
• Remove food and shelves from the door area as needed for access
• Tighten fasteners securely but avoid overtightening to prevent cracking

This small door handle assembly (22 in) replaces a damaged or worn refrigerator/freezer door pull to restore a secure grip and smooth opening. Fits inline with factory trim for a clean, original appearance. What it does:

• Replaces a broken, cracked or missing small door handle to restore safe gripping and door access.
• Stops wobbling or loose handles that affect door opening and closing.
• Matches factory trim finish to maintain original look and feel.

• Disconnect power and empty the door area before beginning any repair.
• Remove retaining screws or clips from the inner door panel to access the handle fasteners.
• Align handle to mounting holes, then secure with the original hardware; do not overtighten to avoid cracking.

This door latch cover is a direct-fit replacement trim piece that protects and conceals the dishwasher door latch assembly while restoring a finished appearance. Keeps the latch area tidy and helps ensure the door closes cleanly. What it does:

• Covers and protects the door latch mechanism from debris and wear
• Helps the door latch engage and the door sit flush when closed
• Restores the appliance's cosmetic finish around the latch area
• Can address symptoms such as a loose-looking latch area or an unsealed door edge

• Disconnect power to the appliance before installing; follow lockout/tagout practices
• Basic hand tools (screwdriver or trim tool) are typically required to remove the old cover
• Align the new cover over the latch assembly and snap or fasten into place per OEM diagram
• If the latch mechanism or strike is damaged, replace those parts as needed for full repair

This door handle replaces a worn or broken appliance door grip to restore a secure, comfortable surface for opening and closing. Designed to match the original fit and appearance for easy cosmetic repair. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, loose, or cosmetically damaged handles
• Restores proper leverage to reduce stress on the door latch and hinges
• Helps improve the look of the appliance by replacing a worn handle

• One door handle

• Refer to your appliance model's service manual for step-by-step removal and installation instructions
• Installation typically requires basic hand tools; disconnect power (and water if applicable) before servicing
• Handle may attach with screws or snap-fit clips—keep removed fasteners for re-use unless replacements are provided

This end cap is the small replacement trim piece that covers the end of a door or drawer handle, restoring a finished appearance and helping keep the handle secure. It's a simple cosmetic and retention repair for worn or damaged handle ends. What it does:

• Covers and protects the exposed end of a handle for a finished look
• Helps keep the handle anchored and prevents side play or wobble
• Replaces cracked, chipped or missing end caps that cause cosmetic damage
• Restores proper alignment and feel when opening and closing the door or drawer

• Basic hand tools typically required; remove handle or access clip/screw per your appliance's service instructions
• Align cap with handle end and snap or press into place until fully seated
• If screws or retaining clips are used, tighten to secure but avoid over-torquing
• Always unplug the appliance or disconnect power before servicing if access requires working near electrical components

This handle assembly is a genuine Husqvarna part. It is an appropriate, exact replacement for a missing handle assembly or an original handle assembly that has been damaged. It is a genuine OEM sourced part sourced from the manufacturer. This part of the trimmer/edger is where the switch controlling the throttle is located. It provides the user with an exceptionally comfortable grip while using the trimmer/edger.To repair, remove the original handle and disconnect any electrical connection. Next remove the cutter shaft and throttle cable. Carefully attach the new handle, then reattach the throttle cable and wiring. Users will need a screwdriver, Torx driver, and pliers to replace this part on compatible models. This repair should take under one hour and is appropriate for people with moderate skill levels. The part does not include the throttle cable, which is sold individually.It is compatible with the Husqvarna 122C trimmer/edger, as well as the 122LD trimmer, 122LDx trimmer/edger, and 122LK trimmer, and other Husqvarna models.