Tool

This specialized plier tool is designed for removing and installing the spring clamp that secures the door boot seal to the outer tub of a front-load washer. The tool provides the leverage needed to safely stretch and release the tension spring without damaging the rubber boot. Use this tool when replacing a torn or moldy door boot seal, or whenever the spring clamp needs to be removed during washer maintenance.

This filter wrench is a ring-style tool used to loosen or tighten a refrigerator's water filter housing or canister. It provides extra leverage to free a stuck filter cup and helps ensure an even, secure reinstallation.

• Provides leverage to loosen a stuck water filter housing/cup
• Assists with secure, even tightening during reinstallation
• Useful when the housing is difficult to turn by hand
• Helpful in tight spaces where hand access is limited

• Turn off the water supply and dispense water to relieve pressure
• Position the wrench around the filter housing/cup; turn counterclockwise to loosen
• After replacing the filter, tighten the housing until snug—do not overtighten
• Restore water supply and check for leaks

This Leg Adjusting Wrench is a simple tool used to turn and secure appliance leveling legs so washers and dryers sit flat and operate quietly. It makes adjusting legs faster and helps reduce rocking and vibration. What it does:

• Fits over standard appliance leveling legs to raise or lower each corner
• Helps stabilize machines to prevent rocking and uneven operation
• Reduces vibration and noise caused by unlevel appliances
• Useful when installing, moving, or re-leveling washers and dryers

• Turn legs slowly and adjust one corner at a time until the appliance sits level.
• Unplug the appliance (and shut off gas supply for gas dryers) before performing major moves or checks.
• Use caution to avoid pinching fingers when lowering legs; keep hands clear of pinch points.
• Check for damaged feet or mounting hardware and replace as needed.

This finished burner funnel directs gas and air into the burner for correct flame shape and ignition. It replaces a damaged or corroded funnel to help restore even heating and reliable burner performance. What it does:

• Channels gas and air into the burner for proper mixing and flame distribution
• Helps maintain even flame across the burner for consistent cooking heat
• Can reduce ignition delays or uneven flames caused by a damaged funnel
• Works with the burner assembly; not a standalone gas valve or igniter

• Turn off gas supply and electricity to the appliance before servicing
• Replace only with the correct funnel for your burner; follow OEM diagram for orientation
• Tighten fittings by hand-first, then snug—do not overtighten; inspect for leaks after reassembly

Blade removal tool for lawn mowers and garden tractors. Safely holds the blade in place during removal or installation. Replace if damaged or missing.

This is a hand-operated siphon pump designed for transferring fluids such as oil, fuel, or other liquids in lawn and garden equipment. It allows you to easily drain or transfer fluids without tipping the equipment. Replace this pump if it is cracked, no longer creates suction, or leaks during use.

Oil filter wrench tool for accessing and removing recessed oil filters in lawn mowers, garden tractors, and log splitters. Essential when standard tools can't reach.

Replacement clean-out tool for gas snowblowers. Used to clear packed snow and debris from chute and auger housing. Replace if lost, broken, or damaged.

Hour meter for rear-engine riding mowers. Tracks engine runtime hours. Replace if display is cracked, broken, or no longer functioning properly.

This replacement part is a flywheel combo. This is a genuine replacement part made by MTD. This part is a flywheel connected to a pulley. The combination makes it an important part of many engines and is used to transfer forces to different objects so that the user may operate the machine properly during use. A new flywheel combo might be needed if the current one is no longer working. If the pulley area of this part has been stripped down due to friction, it would be a good idea to replace the flywheel combo. Be sure the engine is turned off before replacing this part to prevent injury during the repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Replace a cracked, broken, or non-functioning ammeter gauge on your lawn tractor. Installs on the dashboard to display battery charge levels.

This is a temperature gauge that mounts inside the refrigerator to display the internal temperature. It helps you monitor whether the appliance is maintaining the correct cooling range. Replace this gauge if the temperature reading is inaccurate, the display is unreadable, or the gauge is physically damaged.