Touch Pad

I read that the controller and probe controlled the oven temperature. Also read if replacing controller you should replace the overlay. So I ordered all three parts and installed myself with no problem. I took a photo with my phone prior to unplugging wires so I knew the right way to plug the wires into the new controller. Works like new. Only need a nut driver and screwdriver to repair. Job from star to finish approximately 30 minutes. Read more

I googled the error code and symptoms my oven was exhibiting to determine the solution and which parts to order. I needed a new control panel and chose also to replace the overlay that shows on the front of the stove. I could have reused the old one because I turned out to be able to remove it without damaging it. I just kept it in case I damage the new one in the future. The “fast” shipping (not overnight) option had the part delivered the next morning, which was a nice surprise. I felt... Read more

With internet help, diagnosed the problem as a faulty touch panel. Ordered the touch panel, and installed it. Everything worked perfectly! Read more

Got on your web site, put in the model number and bingo a list of common problems was displayed. Clicked on the start button problem link and up came the suggested part. Your web site said that you had the part that I needed so next I clicked on the video that demonstrated how to replace the part. Ordered the part and selected next day air delivery. The next day the part arrived before 10:30am. Thirty minutes after opening the box, my GE Monogram Dishwashing was running like a Swiss... Read more

Purchased part from you and replaced Read more

Just replace with a new one Read more

I replaced the panel, for the third time in about 7 years. its a bit sad that A) kenmore/whirlpool cannot make a control panel that can last longer than 5 years of normal household use, and B) that the panel costs $135 . so that means that the $800 kenmore sits at $1070 in price, due to the two repairs that i have made over the last seven years. this control panel is about 10 or 12 switches, with a 15 pin ribbon cable that connects to the control module. i would rate this as about a $50... Read more

Ordered front panel and panel control. Also ordered name plate (did not need) front panel already has it. My husband and I had it switched out in approx 10 minutes. Took longer to gather proper tools than it did to do the repair. Looks awesome and original! Read more

Bought the control board/touchpad piece. It is a kitchen aide/whirlpool part. Searched around on the internet and found some videos on how to replace it. It was plug and place once I got it in there. Very happy that I could do it myself. Note: I removed the original piece first and got the part number on it so I made sure that I was getting the correct part (a little confusing because several companies use that touchpad). Needed torque screwdriver Read more

Replaced control panel. Read more

Replaced interface panel. The panel was hard to pull off. Read more

My Maytag dishwasher model # MDB7749AWM2 has a diagnosis routine where you push 'normal wash' then 'heated dry' three times in quick succession. This made the machine cycle through all the functions. This demonstrated to me that all systems functioned. So I came to the conclusion that it was only the lights/buttons that did not work, and I was right. So I ordered a new Panel Control. (I've seen that many more Maytag's use this same part) To replace the Panel Control took 9 minutes. UNPLUG THE... Read more

I looked up the part numbers, ordered them from Appliance Parts Pro and they arrived the next day. Followed the video to replace the parts - it was super easy and now everything works great again! Saved lots of time and money. Read more

Board Housing WB27T11161 Faceplate WB27T11229 Control Panel WB36T11246 Read more