Valve

Replace your range top burner valve if burners won't light, flame is weak or uneven, or gas won't flow. Common repair for gas ranges with ignition issues.

This water inlet valve controls water flow to the refrigerator's dispenser and ice-making system, restoring proper water delivery when the factory valve fails. Designed as a direct-replacement valve assembly for compatible Frigidaire units. What it does

• Opens and closes to allow water into the ice maker and door dispenser when signaled
• Prevents water flow when the dispenser or ice maker is inactive
• Common symptom: dispenser or ice maker does not dispense water or fills slowly
• Common symptom: water intermittently flows or the ice maker fails to fill

• Disconnect power and shut off the water supply before beginning work
• Drain remaining water from lines to limit spills during removal
• Replace mounting hardware and tubing fittings exactly as removed; use plumber's tape where appropriate on threaded connections
• Inspect connections and test for leaks after restoring power and water

If your cooktop burner won't ignite or hold a flame, this gas valve controls fuel flow to restore normal operation. Direct replacement part.

If your cooktop burner won't ignite, won't turn off, or has weak flames, the top burner valve may need replacement. Controls gas flow to burners.

Fix no water or slow water flow to your refrigerator ice maker and dispenser. This water inlet valve controls water supply and stops leaks. DIY repair.

This inlet valve controls the flow of water into the appliance, restoring proper fill and water delivery when the original valve leaks, fails to open, or allows continuous filling. A direct-fit replacement when the valve assembly is damaged. What it does:

• Opens and closes to allow water into the appliance during cycle fill
• Stops water flow when the fill is complete to prevent overfilling
• Commonly replaced for symptoms like no water fill, slow fills, or constant leaking/overflow
• Works with factory water lines and electrical connectors to regulate supply

• One inlet valve assembly

• Disconnect power and shut off the water supply before starting
• Handle valve and solenoids carefully; avoid damaging electrical terminals or inlet fittings
• Verify proper hose and electrical connections and test for leaks after installation

This gas valve controls gas flow to the burners and oven, restoring reliable ignition and consistent heat when the burner won't light or the oven won't heat properly. Designed as a direct replacement part. What it does:

• Regulates gas supply to the oven and cooktop burners for proper ignition and consistent flame
• Commonly replaces valves that cause burners not to light or the oven to not maintain heat
• Helps stop irregular gas flow that can lead to weak or fluctuating flames
• Works with the appliance's safety and control systems to open and close gas flow as commanded

• One gas valve as shown

• Shut off the gas supply and disconnect power before starting any repair
• Only install on compatible appliances;
• Tighten gas fittings to the manufacturer's torque spec and test with a leak solution

Fix a gas range that won't heat with this safety valve assembly. Controls gas flow to oven and burners, restoring safe operation when the valve opens.

If your cooktop burner won't ignite or flame is uneven, this valve kit controls gas flow to restore proper operation. Direct replacement assembly.

Fix a freezer that won't dispense water or fill the ice maker with this water inlet valve. Controls water flow to dispenser and ice systems on demand.

Replace your range safety valve if burners won't light or gas flow stops unexpectedly. This thermal valve regulates gas flow for safe operation. DIY repair.

Burner won't ignite or heat properly? This range top burner valve controls gas flow to your cooktop burner. Direct replacement part for gas ranges.

Burner won't ignite or flame is too high or low? This range top burner valve controls gas flow to surface burners. Moderate DIY repair.

Dishwasher drain check flapper valve prevents backflow and water leaking into the tub. Slides into filter assembly slot. Simple DIY repair.