Need Help?
Call
The Dishwasher Inlet Valve is an OEM part for LG dishwashers. This valve controls the flow of water into the dishwasher, opening to allow water in at the start of the wash cycle and closing to prevent any further water entry once the desired level is reached. It ensures that the dishwasher receives the correct amount of water for optimal cleaning performance.
Causes of a bad inlet valve can include mineral deposits or debris clogging the valve, electrical issues, or general wear and tear from prolonged use. A malfunctioning valve can lead to improper water levels and potential flooding.
Symptoms of a bad dishwasher inlet valve include:
This OEM LG part is also compatible with Sears/Kenmore models.
Replaced the water supply valve and the drain dump valve. The drain hose had to be replaced also. Read more
Delivers water from supply line to dishwasher tub. Replace if cracked, leaking, chewed by rodents, or damaged during installation or moving.
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to... Read more
Replacement silverware basket for dishwashers. Holds flatware upright during wash cycles. Replace if cracked, broken, or has holes causing utensils to fall through.
Replaced basket Read more
Replaces cracked, kinked, or leaking dishwasher drain hose. Connects unit to household drainage system. Essential when hose is damaged or worn.
Ordered replacement drain hose, left hand panel of dishwasher removed (remove 2 screws in front left trim panel & friction fit clip at top back then slide up & off. This reveals the O-ring drain hose connection point. You need to remove the retainer block where the hose exits the appliance. Old hose pulls out and new hose pushes in. In the end a very easy installation. Most of the time spoent here is removal & reinstallation of dishwasher back into position - the actual hose swap takes 10 mins Read more
Fix a dishwasher door that won't latch or stay closed. This door latch assembly secures the door during operation. DIY repair in 15-30 minutes.
Replaced with new latch, took about 5 minutes. T25 torx screwdriver and flathead screwdriver needed. Read more
The Vent Blower Assembly is an OEM part for Frigidaire dishwashers. It is designed to help ventilate the dishwasher by expelling hot, moist air from the interior after the washing cycle.
You should replace the vent blower assembly if it becomes faulty. Causes of a bad vent blower assembly can include regular wear and tear, blockages from debris, or electrical issues. A malfunctioning vent blower can lead to poor drying performance and excessive moisture inside the dishwasher.
Symptoms of a bad vent blower assembly include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
I had an appliance repair guy come and he told me it was possibly the vent assembly but if changing it didn't fix the problem it would be the control board next. He felt it was not worth the money to repair because he would have to disconnect everything just to get to the vent on the right rear top of the dishwasher. When i took the DW out thinking i had to buy a new one i saw this part was stuck open and covered in limescale deposits and grime.I ordered the part from appliance pros and payed... Read more
The Accumulator is an OEM part for Whirlpool dishwashers. It is designed to manage and distribute the water flow within the dishwasher, ensuring optimal water pressure and cleaning efficiency.
Causes of a bad accumulator can include wear and tear over time, buildup of mineral deposits or debris that block the water flow, or damage from high water pressure or accidental impact.
Symptoms of a bad accumulator include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
The hardest part was getting on my knees to do the repair/replacement. It was obvious debris wasn't being filtered out when the water was recirculated. I noticed the accumulator wasn't seating right and found the plastic clips on the backside were bent and worn. The new part came within a day and a half. Everything either unscrewed and snapped together with no tools. You may want to use a flat screwdriver to take the upper arm tube feed loose from its clips but it can be done by hand. Done... Read more
Detergent dispenser door won't stay closed? This latch secures the detergent cup during wash cycles. Simple DIY repair with video guidance included.
After having seen the video I installed the new lid and it worked. Read more
Replacement dishwasher panel that covers and protects internal components. Install to replace a dented, cracked, worn, or missing panel piece.
Ordered front panel and panel control. Also ordered name plate (did not need) front panel already has it. My husband and I had it switched out in approx 10 minutes. Took longer to gather proper tools than it did to do the repair. Looks awesome and original! Read more
Dishwasher not draining or water left in tub? The drain pump assembly removes wastewater during cycles. DIY repair typically takes about 1 hour.
I very seldom respond to requests for feedback like this but definitely feel moved to do so in this case. When our 8 year old dishwasher started acting up my initial reaction was to simply replace it. I wasn't sure what was wrong, nor if I would be able to find the right part once I did figure out the problem. The troubleshooting advice on this website was spot on and I quickly figured out what needed to be replaced. The repair videos were easy to follow and the parts were here two days... Read more
Replaces broken or worn dishwasher door cables and springs. Controls door opening and closing. Includes cables, springs, and mounting hardware.
I looked online and found a number of repair videos. The one from AppliancePartsPros was the most clear. I initially went to Amazon to get the part but the delivery on it was unacceptable. I googled the part and found AppliancePartsPros. It was cheaper than Amazon and arrived MUCH more quickly. When it came time to do the repair, we watched the video again. The repair went VERY smoothly! Read more
Lower rack roller and stud assembly supports smooth gliding of your dishwasher's bottom rack. Replace if roller is worn, cracked, or missing.
Ordered new roller w/stud assembly Read more
Fix a dishwasher that won't clean properly with a new circulation pump motor. This part sprays water over dishes during wash and rinse cycles.
Using my buddy chat gpt I started troubleshooting the problem, identified potential issue, bought and learned how to use a multimeter, ordered part and replaced it. Never worked on an appliance once in my life, been a framer/drywall hanger since I was 19. Read more
Upper rack roller wheel for dishwashers. Attaches to the rack and glides along the track for smooth loading. Replace if cracked, broken, or worn out.
I went online to see the schematic on this particular Whirlpool dishwasher. After assessing the problem I was able to order the required parts easily online. They were delivered in three business days and I installed them in less than thirty minute. The new parts totally eliminated the hassle fighting with a sagging shelf. Very pleasant experience. Read more
Replacement cap that seals the rinse aid dispenser on your dishwasher door. Replace if cracked, broken, warped from heat, or missing to prevent leaks.
This was very simple. Thgey just popped back into place asnd the cap screws in. Read more
Plastic bushing that guides and supports the dishwasher door hinge assembly. Replace if cracked, broken, or worn causing noisy or misaligned door movement.
Checked out the AppliancePartsPros.com online parts/assembly diagrams for our Bosch dishwasher model and ordered the two sided set of new springs + connector ropes + connector-to-door ... plus a couple of other relatively inexpensive adjoining parts that might have become worn over time, just in case they were needed. The extra parts arrived in two days with standard shipping. Called about the "back ordered" primary set of parts (which had been listed as being "in stock" when I placed the... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.