Dispenser Parts

Replace your dishwasher's detergent dispenser lid if it's cracked, broken, or missing. This cover installs on the dispenser assembly to seal properly.

Left hinge cap for dishwasher door assembly. Replaces cracked, broken, or missing hinge caps. Cosmetic and structural part for door hinge cover.

This decorative cover conceals the upper door hinge mechanism on the right side of dishwashers. Replace when the cover is cracked, discolored, or missing, affecting the appliance's appearance.

Fix detergent door that won't open or latch properly. This dispenser plunger actuator restores mechanical engagement between the lid and release mechanism.

Replacement water level control cover for dishwashers. Snaps over the water level control assembly. Order a new cover if yours is broken, cracked, or missing.

Front cover for dishwasher pump housing. Replaces cracked, broken, or missing pump housing covers. Installs on the front of the circulation pump assembly.

This is the worktop lid that sits on top of the dishwasher, serving as a finished cover surface for the unit. It provides a clean appearance and protects the top of the appliance. Replace this lid if it is cracked, warped, stained beyond cleaning, or damaged from heat or impact.

Replace your dishwasher's filter assembly cover if it's cracked, broken, or missing. Installs over the filter assembly and secures under the spray arm.

This cover, volute replaces the outer half of the dryer blower housing to protect the blower assembly and help direct airflow for efficient tumbling. Restores proper airflow path and helps reduce rubbing or contact with the blower wheel. What it does:

• Replaces the dryer blower housing cover that surrounds and shields the blower wheel
• Directs exhaust airflow from the blower to the exhaust duct for correct drying performance
• Helps prevent the blower wheel from rubbing on cabinet parts or allowing foreign objects to reach the blower
• Commonly used when the original cover is cracked, warped, or missing fastener locations

• One cover, volute

• Refer to your model's service manual or diagram for exact placement and screw locations
• Disconnect power and gas before starting any repair to avoid shock or injury
• Handle sharp sheet-metal edges carefully and use appropriate hand tools; reinstall all fasteners securely
• If rust, corrosion, or additional damaged parts are present, inspect the blower wheel and housing for proper fit

This sump housing sits at the bottom of the dishwasher tub and collects water that is then recirculated by the wash pump or drained by the drain pump. It serves as the central water basin that directs flow through the wash and drain systems. Replace this housing if it is cracked, leaking from the bottom of the dishwasher, or if debris buildup inside it is restricting water flow and causing poor cleaning performance.

This plastic housing covers the height adjustment mechanism for the dishwasher's upper dish rack, located on the rack's side rails. Replace when the cover is cracked, missing, or prevents smooth rack height adjustment.

This is the detergent dispenser assembly mounted inside the dishwasher door that holds and releases detergent at the appropriate time during the wash cycle. It includes the dispenser housing, lid, and latch mechanism. Replace this assembly if the dispenser door fails to open during the cycle, detergent is not dispensing properly, or the latch is broken.