General Electric Burner & Related Parts

Replaces a cracked, corroded, or damaged burner base on your gas cooktop or range. Routes gas from the orifice to burner ports and supports the cap.

This gas valve and pipe assembly controls and routes natural gas from the appliance inlet to the burner manifold, restoring proper fuel flow for ignition and stable burner operation. Designed as a direct-replacement service part. What it does

• Regulates and directs gas flow from the inlet to the oven/range burners.
• Enables proper ignition and stable flame for baking and broiling cycles.
• Works with the appliance's existing manifold and burner orifices to maintain correct gas delivery.

• Turn off gas supply and disconnect power before servicing; follow all safety procedures.
• After installation, check all fittings for leaks with an approved gas leak test (do not use an open flame).
• Replace only with the exact part specified for your appliance; inspect connections and gaskets and tighten to manufacturer torque specs.

The Water Valve is an OEM part for GE electric dryers. Located near the bottom of the machine, it controls water flow into the condenser system during moisture-sensing cycles.

The moisture sensing function uses this valve to introduce precise amounts of water vapor into the exhaust air stream periodically. This allows the condenser to capture moisture readings accurately and determine optimal cycle time based on humidity levels. 

Causes of failure include mineral buildup restricting flow, worn seals enabling leaks, or misaligned internal components hindering valve movement.

Symptoms of a faulty water valve are: 

• Loss of moisture sensing ability
• Incomplete or improper readings affecting cycle times  
• Water leaks from the valve area
• Failure to inject water vapor as needed

This part is also compatible with some Kenmore models using GE components.

Simmer ring for gas range burners. Installs around the burner to control flame focus for low-heat cooking. Replace if cracked, warped, or missing.

Replacement burner griddle for gas ranges. Restores flat stovetop cooking surface for griddling and frying. Replaces worn, warped, or missing griddles.

Burner cap for cooktop gas burners. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, discolored, or missing.

This replacement burner griddle fits over a cooktop burner to provide a flat, heated surface for cooking foods like pancakes, eggs and sandwiches. It restores a level cooking surface when the original griddle is damaged or worn. What it does:

• Provides a flat, even surface for griddling and frying on the cooktop
• Improves heat contact for foods that need a broad, stable cooking area
• Replaces cracked, warped or heavily scratched griddles that interfere with cooking
• Helps prevent direct flame contact with small or delicate foods

• Ensure the range is completely cool and power/gas is turned off before handling.
• Lift old griddle straight up; align new griddle so it seats properly over burner supports.
• Do not force or bend the griddle; avoid using on damaged burners or supports.
• Clean with non-abrasive cleaners; follow appliance manufacturer cleaning guidance.

Dryer not heating or won't ignite? This gas valve and pipe assembly controls propane flow to the burner. Common fix for no-heat issues on gas dryers.

Burner cap sits on top of the range burner base to evenly distribute flame. Replace if cracked, chipped, discolored, or missing for proper cooking.

Black burner cap for cooktop ranges. Replaces cracked, chipped, or missing caps that sit on top of the burner head. Restores appearance and function.

Hot surface ignitor that mounts in the oven bake burner assembly. Replace when cracked, corroded, or no longer glowing bright enough to ignite gas reliably.

Left-side burner cap that centers and protects the burner head while shaping the flame. Replace if cracked, chipped, or worn to restore proper coverage.

Black burner cap for gas cooktops. Covers the burner head to distribute flame evenly. Replace if cracked, chipped, or discolored from heat exposure.

Grey burner cap for gas cooktops and ranges. Covers the burner head assembly. Replace if cracked, chipped, discolored, or missing for proper flame distribution.

Replace a worn, cracked, or damaged bake burner assembly in your gas range oven. This direct-fit burner tube restores even heating and reliable ignition.

This 27" H-shaped surface burner supplies the flame source for a gas cooktop burner assembly, restoring proper flame coverage for everyday cooking. Designed as a direct replacement for worn, damaged, or corroded H-style burners. What it does:

• Provides the main flame ports and structure for an H-style gas cooktop burner.
• Restores even flame distribution for consistent heating across pots and pans.
• Replaces burners that are cracked, bent, heavily corroded, or showing blocked ports.
• Helps address symptoms like weak or uneven flame and visible burner damage.

• Turn off gas supply and electrical power to the appliance before beginning work.
• Remove grates and burner caps, then lift out the old burner; align and seat the replacement so ports and mounting tabs match.
• Inspect and clean surrounding burner parts and ports before reassembly; replace any damaged caps or ignition components as needed.