Need Help?
Call
Burner won't turn down from high or stays on? This infinite switch regulates heat to surface elements. Common DIY fix for overheating burners.
I immediately took the cooktop apart, found the bad part, and got the part number. I went online to AppliancePartsPros and typed in the model number, found the part and ordered it on a Sunday evening. The part arrived on Wednesday and I installed it that night and we were good to go! Read more
Fix burners that won't spark or igniter that won't stop clicking. This switch harness relays signals from knobs to spark module. Moderate DIY repair.
Replaced harness. Read more
Burner won't spark or ignite? This ignition switch controls the spark module for gas range surface burners. Mounts on the valve assembly behind knobs.
Rather than replacing the whole ignition switch harness, I cut out the broken switch and replaced it with Burner Ignition Switch WB24K10017 / AP2632529. Wire stripper, small wire nuts, and electrical tape were also used. At first, the new switch was constantly on when the knob was in the off position. The gas valve shaft has a "U" shape. When the U is right side up, the gas is off and so should the igniter. The gas valve shaft position couldn't be changed, so instead, I re-mounted the... Read more
Color: Black. Instruction sheet included.
Removed rocker switch,made up jumper so the compactor could be used while awaiting replacement switch. The part came 2 days later and was installed in less tha 5 minutes. Unit working like new again. Thanks for the great service!! Read more
This wiring harness connects the appliance's electrical components to restore reliable power and signal routing. It replaces a damaged or worn harness to help resolve power loss and intermittent electrical issues. What it does:
Replacement switch harness that connects a cooktop or range surface element switch to the appliance wiring, restoring secure electrical connections so burners heat reliably and reduce intermittent or unsafe operation. What it does:
Replaced igniter wire harness. Read more
Fixes burner that won't heat or stays on one temperature. This infinite switch restores variable heat control to your cooktop surface element.
Replaced shorted wire and blown switches. Read more
Fix burners stuck on high or won't adjust temperature with this selector switch. Restores reliable control of cooktop functions. Moderate DIY repair.
I replaced an infinite switch and a simmer select switch. Read more
Fixes F1 or F2 error codes and prevents overheating in ovens. This safety switch monitors temperature limits to protect components. Direct fit part.
We purchased a part called Limit Switch from you. It totally corrected the problem. Read more
Fix burners that won't light or spark inconsistently with this cooktop spark igniter switch. Restores reliable ignition on gas burners. Takes 15 minutes to install.
Replaced igniter under each burner knob. Used needle nose pliers to remove the electrical connections (2) of the igniter then slipped it off the gas valve shaft. Replaced with new igniter (click in place) and replaced electrical connectors. Took about 15 minutes to complete. Read more
Oven light switch.
Slid the oven out. Opened the control panel. Shut the power off. Replaced the switch. reversed the steps. Read more
If your range burner won't spark or ignite when you turn the knob, this burner igniter switch restores spark delivery for reliable lighting.
I installed two burner ignitions under the knobs then installed a new spark module, which I had to order from a different vendor as this is a 20+ year old Caloric stove. Fortunately this spark module is used in many other appliances. Read more
This main wire harness routes power and control signals between the appliance's control board and components to restore electrical connectivity and reliable operation. Replacing a damaged harness helps eliminate intermittent faults and lost functions. What it does:
Ordered the part required to complete the electrical connection to enable the non-working burner to ignite with the gas. Read more
Gas burner won't light or clicks but doesn't ignite? Replace the igniter switch to restore spark and reliable lighting. Simple 15-30 minute DIY fix.
Very simple repair. Watched video and followed each step. Took about 15 min to make repair. Read more
Fix a gas burner that won't light with this cooktop igniter switch. Common solution for spark ignition failure. Moderate DIY difficulty level.
Actually we called Sears repair and they did a good job diagnosing and fixing the problem (Jacob). But they never supplied the part after more than a month, so we got the number from them and ordered it ourselves from you. We had already paid for it, so had them do the work. We would have fixed it ourself but could not figure out how to lift up the entire range top and videos we found were for a totally different stove top and we had no information how to get to the part to replace it. Read more
For switch mounting nut, order part# WP422617.
This replacement part looks nothing like the original because the original is two parts, the replacement is one part. The original has a switch with 3 wires coming out of it that go into a "block" screwed to the bottom tray. And this "block" has 2 wires that come out of it going to the fan. With the replacement, the block is eliminated and the 2 wires go directly to the switch. Easy install. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.