Switch

Cooktop element not heating or stuck on? This infinite switch controls surface element temperature. Direct replacement part for electric cooktops.

This fan relay is an electrical replacement part that restores the relay control for the refrigerator/freezer fan motor so the appliance can circulate air properly and maintain even cooling. Use it to replace a failed relay and return fan operation. What it does:

• Switches electrical power to the evaporator/condenser fan motor when the control calls for airflow
• Commonly used when the fan won't start, runs intermittently, or the appliance struggles to maintain temperature
• Helps stop clicking or repeated start attempts caused by a bad relay
• Works as the control interface between the main control and the fan motor

• One fan relay

• Always unplug the appliance before starting any repair to avoid shock risk
• Locate the relay on the compressor or control module per your model's service guide and note connector positions before removal
• Transfer wiring/plug connectors exactly; avoid bending pins or over-tightening fasteners

If your oven won't start or runs with the door open, this door interlock switch detects proper closure and latching. DIY repair in under an hour.

Color: White

The Switch is an OEM part for LG ovens. This switch is responsible for turning the oven light on and off when the door is opened and closed. It ensures that the oven light operates correctly, providing visibility inside the oven cavity when the door is opened.

A bad oven door light switch can occur due to electrical issues, wear and tear, or other internal malfunctions. If you notice symptoms such as the oven light not turning on or off when the door is opened or closed, it may be time to replace the light switch.

Symptoms of a bad switch include:

• Oven light not turning on when the door is opened
• Oven light not turning off when the door is closed

Ensure proper function in your LG oven by replacing the faulty switch with this genuine OEM part.

This LG replacement part is also compatible with select Kenmore models.
 

If your range burner only works on high or won't shut off, the infinite switch likely failed. Moderate DIY repair with wiring diagram included.

This door-activated plunger light switch controls the interior lamp by turning it on when the door opens and off when it closes, restoring proper interior illumination and preventing lights from staying on or failing to light. What it does:

• Detects door position and completes the circuit to power the interior light when the door opens.
• Replaces a worn, stuck, or broken door light switch that prevents the lamp from turning on.
• Common symptoms: interior light does not turn on, light stays on continuously, or light works intermittently.
• Simple, direct replacement for the door-mounted lamp switch assembly.

• Disconnect power or unplug the appliance before servicing to avoid electrical shock.
• Access the switch from the door liner or hinge area; basic hand tools (screwdriver) are typically required.
• Handle the switch and wiring gently; confirm correct wiring orientation before reconnecting power.

This is the range surface unit infinite switch for an 8-inch burner. It regulates power to the large surface element so you can set and maintain the desired heat level during cooking.

• Controls the temperature of an 8-inch surface (cooktop) element
• Replaces a switch that causes an 8-inch burner to be stuck on high, not heat, or only work intermittently
• Helps restore smooth, adjustable heat settings
• Designed for the large surface element circuit on compatible ranges

• Disconnect power before servicing; this is a high-voltage repair
• Note knob orientation and wire positions; take a photo for reference
• Transfer wires one at a time to the new switch to maintain correct connections
• Ensure the switch shaft and knob align properly before reassembly and testing

Range burner not heating properly or won't adjust temperature? This infinite switch controls surface element heat levels. Moderate DIY repair in 30-45 minutes.

Electronic control board that operates the appliance's user interface, timers and cycle selection to restore responsive controls and correct program sequencing. Replacing a failed control returns normal cycle selection and display function. What it does:

• Manages user inputs, display indicators and electronic cycle logic for the appliance.
• Starts and stops cycles, sequences timers and communicates status to other modules.
• Common symptom fix: blank or unresponsive display, inability to select cycles, or erratic/electronic control behavior.
• Replacing this board fixes faults caused by failed or intermittent electronic control components.

• Disconnect power before beginning any repair to avoid shock or damage.
• Handle the board by its edges and avoid static discharge; use anti-static precautions if available.
• Verify connector alignment and secure mounting; replace screws and retainers as removed.

Burner not heating or stuck on one temperature? This infinite switch restores variable heat control to your electric cooktop element. Moderate DIY repair.

Burner won't heat or stays on high? This infinite switch restores variable temperature control to your range surface element. Direct fit replacement.

Burner stuck on high or won't adjust temperature? This infinite switch restores variable heat control to electric cooktop surface burners. DIY repair.

This light switch is the replacement rocker-style control that turns the oven/cabinet light on and off so you can safely check cooking progress without opening the door. It provides a direct, user-facing switch function and restores reliable light control. What it does

• Replaces a faulty rocker light switch that won't turn the oven/cabinet light on or off
• Restores responsive on/off control for the interior light so you can view contents without opening the door
• Helps eliminate intermittent or non-working light due to a worn or failed switch
• Fits into the original switch opening and interfaces with the existing wiring harness

• One (1) light switch (rocker-style)

• Disconnect power to the appliance before beginning any repair to avoid electric shock
• May require removing the control/inner panel or light housing to access the switch—use appropriate hand tools
• Verify wire locations and harness connection before removal; swap wires one at a time or photograph connections