Wire, Harness, Power Cord

This wiring harness routes power and signals between the appliance's control and electrical components so controls, igniters, sensors or motors receive the correct connections. It replaces a worn or damaged factory harness to restore proper electrical routing. What it does:

• Provides the factory-style wiring connections between control boards, switches, sensors and actuators
• Restores lost or intermittent electrical connections that can cause controls or components to stop working
• Helps resolve symptoms such as intermittent power to components, no response from controls, or certain functions not activating
• Matches OEM connector types and wire lengths

• One replacement wiring harness

• Disconnect power to the appliance before starting work to avoid shock or injury
• Compare the replacement harness to the original for connector type, pin count and wire routing before installing
• Route and secure the harness away from heat sources and moving parts; use existing clips or ties where provided

This harness assembly is the appliance wiring connector bundle that carries power and signals between controls and components, restoring proper electrical connections for normal operation. What it does:

• Routes power and control signals between the control board and key components
• Replaces damaged, burned, or loose wiring that can cause intermittent operation
• Helps resolve symptoms like unresponsive controls, failure to start, or component loss of power
• Restores factory wiring layout and connector fit for reliable connections

• Disconnect power before starting; confirm power is off at the breaker
• Compare connectors and wire colors to the old harness before removal
• Route and secure harness to avoid heat or pinch points; use existing clips/mounts

The Burner Box Harness is an OEM part for GE gas ranges. It connects burners to the main control unit for regulated heating.

Causes of failure include wire fatigue from repeated expansion/contraction during cooking, insulation cracks due to excessive heat exposure, and loose terminals. 

Symptoms of a faulty burner box harness include:

• Unstable or irregular burner flames 
• Inability to ignite or adjust specific burners
• Responsiveness issues with burners/control knobs 

This OEM part is also compatible with Hotpoint and RCA gas range models.

This replacement power cord restores the appliance's main electrical connection so your unit can receive power safely and reliably. Use it to replace a damaged or worn cord that causes power loss or intermittent operation. What it does

• Provides the primary electrical connection between the appliance and wall outlet.
• Replaces frayed, cut, or otherwise damaged cords that can cause intermittent power or no power.
• Helps eliminate arcing or visible cord damage that may create safety risks.
• Returns dependable power delivery so the appliance can function as intended.

• Always unplug the appliance or disconnect power at the breaker before starting work.
• Route the cord and attach any strain relief or mounting hardware exactly as the original; secure all wiring connections.
• Inspect connectors and wiring for damage before reconnecting power.

This dispenser wiring harness connects the dispenser controls and components in the refrigerator door, restoring electrical continuity for the dispenser functions and simplifying replacement of a damaged or faulty harness. What it does:

• Carries power and signals between the dispenser switches, valve/solenoid, and indicator lights
• Replaces frayed, pinched, or damaged wiring that can cause intermittent or no dispenser operation
• Addresses symptoms like non-working water/ice dispenser, no dispenser lights, or unresponsive dispenser switches
• Provides factory-style connectors for a direct, plug-and-play replacement

• One dispenser wiring harness

• Disconnect power to the appliance before beginning any work to avoid shock
• Remove the inner door panel or dispenser bezel per your model's service instructions to access the harness
• Match connectors and routing to the original harness; avoid stretching or pinching wires when reinstalling
• Test dispenser functions after installation and reassemble panels securely

This replacement electrical wire restores a single conductor connection used in your appliance's wiring system, helping re-establish power or signal continuity where the original lead is damaged. What it does

• Replaces a single appliance electrical lead to restore lost connection or repair damaged insulation.
• Used to carry power or control signals between components.
• Common symptom: intermittent or no power to a component, visible frayed or broken wire.
• Matches original part function and routing; intended for direct replacement.

• One replacement electrical wire (single lead).

• Disconnect power to the appliance before starting any repairs to avoid shock.
• Verify wire routing and secure connections match the original; use proper wire connectors and insulation.
• If soldering or crimping is required, follow manufacturer guidelines and use proper tools.

This wiring harness connects key electrical components, restoring reliable power and signal flow so your appliance operates safely and consistently. It replaces a damaged or worn wire assembly to help resolve intermittent or lost electrical connections. What it does:

• Routes power and signals between control modules, switches, and components
• Replaces frayed, broken, or corroded wires that cause intermittent operation
• Common symptom fix: appliance won't power on or functions work inconsistently
• Common symptom fix: specific circuits or features stop responding

• One replacement wiring harness as shown

• Disconnect power before starting — work only on a de-energized appliance
• Handle connectors gently; avoid forcing terminals into place

This wire harness assembly connects the appliance's control components to power and sensors, restoring reliable electrical signaling and operation. Use it when damaged wiring or connector failures cause power or control faults. What it does:

• Routes electrical power and signals between the control board, user interface, and major components
• Replaces frayed, burned, or broken wiring that can cause intermittent or lost control functions
• Restores proper connector fit for secure electrical connections
• Helps resolve symptoms such as unresponsive controls, intermittent operation, or visible wire damage

• Disconnect power before servicing to avoid shock or injury
• Verify connectors match and seat fully; replace any damaged clips or fasteners
• Handle connectors by the plug bodies—avoid pulling on wires

This wire harness assembly routes power and control signals between the appliance's main control and its components to restore reliable electrical connections. It replaces a damaged or intermittent wiring assembly to help components receive proper power and signals. What it does

• Connects the main control to heating elements, sensors, switches, or other components depending on appliance model
• Restores lost or intermittent power/signal paths caused by frayed, burned, or broken wires
• Helps resolve symptoms like components not powering, intermittent operation, or electrical arcing at connection points
• Maintains correct wire routing and connector fit for safe operation when installed properly

• Disconnect all power (unplug or switch off breaker) before beginning work
• Photograph existing routing and connector locations to ensure correct reinstallation
• Route harness without pinching; secure with original clips or ties and avoid heat sources

This low-voltage transformer wire harness routes the 42/48V control power between the appliance transformer and control components, restoring reliable low-voltage connections for proper control operation. What it does:

• Carries low-voltage (transformer) control signals between the transformer and control board/components
• Replaces damaged, frayed, or corroded wiring that can cause intermittent or no control response
• Helps restore consistent control panel and relay operation when harness failure is the cause
• Used where a dedicated 42/48 transformer wiring harness is specified

• One replacement low-voltage transformer wire harness (42/48)

• Disconnect power before accessing internal components to avoid electrical shock or damage
• Inspect connectors and mating terminals for corrosion; replace or clean if needed before installing new harness
• Route harness following original wire paths and secure with existing clips to prevent chafing

This electrical wiring harness connects and routes power and signals between fridge components, restoring reliable electrical continuity so controls, lights, and motors can operate correctly. Use this direct-replacement harness to repair damaged or worn wiring. What it does

• Routes power and signal connections between control boards, compressors, valves, lights, and sensors
• Restores lost or intermittent electrical connections that can cause controls to fail or components to stop working
• Prevents shorts and open circuits when damaged wires or broken connectors are replaced
• Matches OEM connector types and wire lengths for a direct-replacement fit

• One electrical harness

• Disconnect power at the breaker or unplug the appliance before inspecting or replacing the harness
• Compare connector shapes and wire colors to the original harness to ensure correct installation
• Secure wires away from moving parts and sharp edges; avoid pinching or excessive bending