Axle, Roller, Pulley Parts
Genuine Ge part
By: Ge
Part Number: WD12X10231
Replacement roller and stud assembly for dishwasher lower rack. Installs on rack frame for smooth gliding. Needed when wheels are broken, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Lower rack wheels broken making is difficult to move the rack in and out Joan O. • Bainbridge , GA • July 22, 2016
My daughter replaced the wheels. I showed her how to remove the old wheel and snap on the new ones. Easy fix that empowers her to try repairs on her own.
Read more
More
$11.55
- Compare At:
-
$13.86
- You Save:
-
$2.31
Genuine Lg part
By: Lg
Part Number: 4560EL3001A
Idler pulley maintains tension on the dryer belt. Replace if worn, cracked, or causing belt slippage. Installs between motor and drum support system.
Do-It-Yourself Stories from Customers like You
Dryer was squeaking on start up and rumbling noise while running. Gene L. • Redmond , WA • December 01, 2020
I have an LG dryer purchased in 2007. Model: DLE9577SM. It was squeaking at start-up and rumbling a little. Not knowing what parts I would actually need, I ordered rollers with/without assemblies, tensioner pulley-only, new belt. After viewing this video a couple of times, I attacked my machine which is located in the comfort of my garage. Lots of room to spread out. Nice. This disassembly went OK however because, I suspect, my machine is 13 years old, the removal of the control panel was...
Read more
More
$30.54
- Compare At:
-
$36.65
- You Save:
-
$6.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9708172
Holds and rotates mixer attachments around the bowl. Replace if cracked, worn, bent, or falls out during operation. Includes housing and shaft.
Do-It-Yourself Stories from Customers like You
The planetary in my kitchenaid stand mixer would fall out Catherine N. • Muscadine , AL • August 08, 2015
First, I went on YouTube and found a site that showed how to replace the planetary for my mixer. We have ordered planetary form AppliancePartsPros. We followed the direction given on youtube and this fixed my mixer.
Read more
More
$62.61
- Compare At:
-
$74.51
- You Save:
-
$11.90
Genuine Whirlpool part
By: Whirlpool
Part Number: W10888592
Replace broken or worn upper dishrack wheel assemblies on your dishwasher. Snap-in installation restores smooth gliding of the top rack for easy loading.
Do-It-Yourself Stories from Customers like You
Disgrace wheel assemblies broke Richard C. • Phoenix , AZ • November 26, 2019
I ordered 1 assembly first and then another broke. so I ordered 2 more and replaced 2 more. The 4th was replaced last summer. I should have ordered 4 and replaced all when the 1st one failed.
Read more
More
$55.30
- Compare At:
-
$66.36
- You Save:
-
$11.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10082868
Roller and mount assembly for dishwasher racks. Allows smooth sliding for loading and unloading. Replace if worn, cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
The upper and lower wheels on the dishracks were broken. Edward B. • Tyrone , GA • January 01, 2021
I was repairing my daughter's WDT730pahz0 Whirlpool dishwasher. The bottom dish rack set of wheels was very easy to install. The replacements for the upper set of wheels is different than the originals. In my opinion, the replacements are far superior to the original parts. The problem, as many have pointed out, is that there are no instructions on how to install the new parts. I worked for 15 minutes, attempting to put the pieces together and then install them on the dishrack. That was a...
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Frigidaire part
By: Frigidaire
Part Number: 131863007
Idler pulley assembly for dryers. Mounts on the idler arm to keep the belt aligned and tensioned. Replace if pulley is worn, cracked, or squeaking.
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$50.68
- Compare At:
-
$60.31
- You Save:
-
$9.63
Genuine Ge part
By: Ge
Part Number: WD35X20994
Upper dishrack roller kit with 4 nylon rollers and 4 axles. Replace broken, cracked, or worn rollers that prevent smooth rack gliding in your dishwasher.
Do-It-Yourself Stories from Customers like You
Water was leaking from base water was not draining from tub extreme build up of mineral deposits Kateri G. • Vista , CA • September 18, 2016
Removed and cleaned all inside components of dishwasher. Replaced the sump inlet and fine filter. I decided to complete the repair myself when my appliance repairman did not want to help me. The videos from Appliance Parts Pro are AMAZING!!!! Gave me the confidence to do the repair myself (had to fully uninstall the machine and flip it over). THANK YOU!!!
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10204131
Replace cracked or broken dishwasher rack roller axle assemblies. Installs on upper or lower dish racks to restore smooth gliding. Includes clips.
Do-It-Yourself Stories from Customers like You
Broken rollers. Roger H. • Brownstown , IN • July 11, 2017
Snaped off and snaped on.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: W11157085
Upper rack roller wheel for dishwashers. Attaches to the rack and glides along the track for smooth loading. Replace if cracked, broken, or worn out.
Do-It-Yourself Stories from Customers like You
Sagging upper tray in dishwaser Jeff D. • Aurora , CO • July 15, 2017
I went online to see the schematic on this particular Whirlpool dishwasher. After assessing the problem I was able to order the required parts easily online. They were delivered in three business days and I installed them in less than thirty minute. The new parts totally eliminated the hassle fighting with a sagging shelf. Very pleasant experience.
Read more
More
$34.75
- Compare At:
-
$41.35
- You Save:
-
$6.60
Genuine Ge part
By: Ge
Part Number: WH03X32217
Motor pulley for washer drive systems. Mounts on the motor shaft to transfer power to the drum. Replace if cracked, stripped, or threads are damaged.
Do-It-Yourself Stories from Customers like You
There was a loud squeel and it stopped turning Phillip C. • Des Moines , IA • July 06, 2026
Replace motor pulley, belt, mode actuator, clutch gear, spring clutch, and transmission pulley.
Read more
More
$24.95
- Compare At:
-
$29.44
- You Save:
-
$4.49
Genuine Frigidaire part
By: Frigidaire
Part Number: 134793511
Idler arm assembly mounts near the dryer drum to guide and tension the belt. Replace if the pulley is worn, cracked, or causing belt misalignment issues.
Do-It-Yourself Stories from Customers like You
Noisy electric dryer on startup John B. • Wenatchee , WA • January 29, 2018
Disassembled dryer. Installed new belt, drum rollers, idler arm and blower.
Read more
More
$45.30
- Compare At:
-
$53.45
- You Save:
-
$8.15
Genuine Ge part
By: Ge
Part Number: WE03X10016
Drum roller assembly with axle and clips that supports the dryer drum and allows smooth rotation. Replace if worn, cracked, or causing loud noises.
Do-It-Yourself Stories from Customers like You
My dryer was making a loud thumping sound Francis A. • Okemos , MI • January 24, 2020
Changed the wheel guides or rollers on the back and the belt for good measure. Sounds like new.
Read more
More
$31.95
- Compare At:
-
$37.70
- You Save:
-
$5.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-3033630
Pivoting metal arm that maintains belt tension in your dryer's drive system. Replace if bent, cracked, or wobbling excessively when drum is removed.
Do-It-Yourself Stories from Customers like You
Clothes dryer had developed a loud squealing noise the problem turned out to be the idler pulley wheel Don F. • Bakersfield , CA • September 19, 2020
I removed the front panel of the dryer by removing 2 screws and lifting it up and out. Then I removed 4 screws from the bracket holding the tub in place. I had previously removed the 4 screws from the rear inspection cover so I reached in and released the spring loaded belt that turns the tub and then removed the idler pulley wheel. The tub just lifts out at that point, exposing the 2 Drum support rollers in the rear.
I removed the 2 rear drum support rollers and decided to order 2 of...
Read more
More
$60.52
- Compare At:
-
$72.62
- You Save:
-
$12.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507499
The Idler Arm Assembly is an OEM part for Frigidaire dryers. It is an essential component of the dryer's drum support system, responsible for maintaining the proper alignment and smooth rotation of the drum during operation. The idler arm assembly typically consists of an idler arm, pulley, and bearings, working together to support the weight of the drum and facilitate its rotational movement.
Symptoms of a bad idler arm assembly in a dryer include:
- Loud squeaking or grinding noises during operation
- Excessive vibration or shaking of the dryer
- Difficulty in starting or maintaining the drum's rotation
- Potential damage to other components due to misalignment
Causes of a bad idler arm assembly can include wear and tear over time, damage from foreign objects entering the drum, or issues with the bearings or pulley components. A faulty idler arm assembly can lead to improper drum alignment, increased friction, and potential damage to other parts of the dryer.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Clothes dryer was stalling and turning off Stanley F. • Manhattan Beach , CA • February 06, 2018
Main problem was worn bearings in the motor, which was replaced. Additional issues were worn pulley on tensioner and impeller slipping on motor shaft. Pulley was replaced and hose clamp was used to secure blower on shaft.
Read more
More
$51.62
- Compare At:
-
$61.94
- You Save:
-
$10.32
Genuine Lg part
By: Lg
Part Number: 4581DD3003C
Replacement roller for dishwasher lower rack. Installs on the dishrack axle to enable smooth gliding. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
I was missing a wheel on the lower dish rack Ron R. • Goode , VA • August 20, 2015
Ordered the part and snapped it on.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Speed Queen part
By: Speed Queen
Part Number: 959P3
Idler lever kit for Speed Queen washers. Maintains belt tension for smooth drum rotation. Replace if lever is cracked, pulley worn, or mechanism damaged.
Do-It-Yourself Stories from Customers like You
Worn speed queen washer drive belt Douglas C. • Montville , NJ • May 19, 2014
The belt/Idler kit arrived next day after placing the order.
The included directions were very clear with an exploded diagram. Four bolts remove the motor/pump assembly from the machine, three clips release the pump from the motor, then four small nuts remove the support brace from the motor to get access to the pulley and lever. Reverse order to re-assemble.
The idler/pulley was in good condition. However, the kit is just a few $ more and replacement was only few extra steps. The worn belt...
Read more
More
$44.95
- Compare At:
-
$53.94
- You Save:
-
$8.99